On Haswell hardware, there are multiple HDMI outputs capable of digital sound output. As they were identically named, KDE's control center was unable to distinguish them, restored the wrong profile and thus routed sound to the wrong HDMI monitor. --- src/modules/alsa/mixer/profile-sets/extra-hdmi.conf | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/src/modules/alsa/mixer/profile-sets/extra-hdmi.conf b/src/modules/alsa/mixer/profile-sets/extra-hdmi.conf index 96652f8..ff40c64 100644 --- a/src/modules/alsa/mixer/profile-sets/extra-hdmi.conf +++ b/src/modules/alsa/mixer/profile-sets/extra-hdmi.conf @@ -101,14 +101,14 @@ direction = output [Mapping hdmi-stereo] device-strings = hdmi:%f -description = Digital Stereo (HDMI) +description = Digital Stereo (HDMI), Port 1 paths-output = hdmi-output-0 channel-map = left,right priority = 4 direction = output [Mapping hdmi-surround] -description = Digital Surround 5.1 (HDMI) +description = Digital Surround 5.1 (HDMI), Port 1 device-strings = hdmi:%f paths-output = hdmi-output-0 channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe @@ -116,7 +116,7 @@ priority = 3 direction = output [Mapping hdmi-stereo-extra1] -description = Digital Stereo (HDMI) +description = Digital Stereo (HDMI), Port 2 device-strings = hdmi:%f,1 paths-output = hdmi-output-1 channel-map = left,right @@ -124,7 +124,7 @@ priority = 2 direction = output [Mapping hdmi-surround-extra1] -description = Digital Surround 5.1 (HDMI) +description = Digital Surround 5.1 (HDMI), Port 2 device-strings = hdmi:%f,1 paths-output = hdmi-output-1 channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe @@ -132,7 +132,7 @@ priority = 1 direction = output [Mapping hdmi-stereo-extra2] -description = Digital Stereo (HDMI) +description = Digital Stereo (HDMI), Port 3 device-strings = hdmi:%f,2 paths-output = hdmi-output-2 channel-map = left,right @@ -140,7 +140,7 @@ priority = 2 direction = output [Mapping hdmi-surround-extra2] -description = Digital Surround 5.1 (HDMI) +description = Digital Surround 5.1 (HDMI), Port 3 device-strings = hdmi:%f,2 paths-output = hdmi-output-2 channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe @@ -148,7 +148,7 @@ priority = 1 direction = output [Mapping hdmi-stereo-extra3] -description = Digital Stereo (HDMI) +description = Digital Stereo (HDMI), Port 4 device-strings = hdmi:%f,3 paths-output = hdmi-output-3 channel-map = left,right @@ -156,7 +156,7 @@ priority = 2 direction = output [Mapping hdmi-surround-extra3] -description = Digital Surround 5.1 (HDMI) +description = Digital Surround 5.1 (HDMI), Port 4 device-strings = hdmi:%f,3 paths-output = hdmi-output-3 channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe -- 1.9.1 _______________________________________________ pulseaudio-discuss mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
