On 08.02.2015 14:03, Alexander E. Patrakov wrote:
08.02.2015 17:35, Georg Chini wrote:
I think there is some misunderstanding. Let me repeat in a different
way.
The smoother works perfectly (both for timer-based scheduling and for
the needs of your module) on non-batch cards.
But, even for batch cards, where timer-based scheduling is disabled,
the smoother is active and is actually used for reporting the latency
to your module. An attempt to use the smoother for timer-based
scheduling on batch cards has failed. That's why I suspect that it,
on batch cards, also tells lies to your module.
OK, understood. I don't have anything to test it though
Mh, are my USB devices batch cards? I just noticed it says "Disabling
timer scheduling
because BATCH flag is set" in the log and I am not sure, what a batch
card is.
Yes, your USB devices are batch cards. This means that they don't
report their playback position accurately enough. For USB devices, the
granularity of position reports is 6 ms (for large period sizes), but
for others, it may be up to one period size.
When I understand you right, this means that the error of the latency
report will be in
the range of the granularity, so latency may jump around within the
bounds of this error.
Then you definitely need a stop criterion and my approach is correct
because it measures
the error of the latency report and uses that to stop regulation when
you are within those
bounds.
To give you an impression how it works on batch cards: With an
adjust_time of 2 seconds,
44100 Hz sample rate and the default fragment size of 25 ms you usually
end up with about
+/-1 ms error, which is better than I would expect from your statement
above. But I am
also seeing some drift, that means that the regulator will do some small
correction every
few adjust_times. I do not know if this drift is real or caused by the
smoother. I will look into
it and see if I can work around the smoother.
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
