Hi, I'm using a software player name squeezelite that works whith the logitech media server. I never had problems with it since a few months when it stopped working. To reproduce this, I only launch my player and go to the media server to play one music. There is no sound, only some little scratches. When I open pavu, the volume controls are flashing and can't be modified. I'm using mageia 5, kernel version is 3.19.8-desktop-3.mga5 pulseaudio-5.0-6
This happens almost always (but not always) when I use a wireless sound transmitter, pluged on usb (audioengine w1), but most often also when I plug my amplified phones directly on the PC. I have no problem with other players : vlc, clementine, etc, work normally. I submitted the problem to the logitech forum but I hadn't any answer. I couldn't set pulseaudio to not auto respawn himself, so I killed it with and restarted with : $ pulseaudio -k;pulseaudio -vvvvv Here is attached part of the log I get. I removed the lines "probe element" in the beginning, because the file was toot big. After these lines, it's always repeating the same lines. Thanks for your help. Antonio
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x2302400, direction=1 D: [pulseaudio] alsa-mixer.c: Path analog-output (Sortie analogique), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=87, min_dB=-116,25, max_dB=0 D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Path analog-output-speaker (Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=87, min_dB=-181,5, max_dB=0 D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible D: [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Speaker Phantom, alsa_name='Speaker Phantom Jack', detection possible D: [pulseaudio] alsa-mixer.c: Jack Speaker Front Phantom, alsa_name='Speaker Front Phantom Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Path analog-output-headphones (Casques analogiques), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=87, min_dB=-181,5, max_dB=0 D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no D: [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Front Headphone Phantom, alsa_name='Front Headphone Phantom Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible D: [pulseaudio] alsa-mixer.c: Jack Headphone Phantom, alsa_name='Headphone Phantom Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Headphone Mic, alsa_name='Headphone Mic Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40 D: [pulseaudio] alsa-mixer.c: Checking for playback on Surround analogique 4.0 (analog-surround-40) D: [pulseaudio] alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround40:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround40:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround40:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround40:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Argument invalide I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Argument invalide D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40 D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41 D: [pulseaudio] alsa-mixer.c: Checking for playback on Surround analogique 4.1 (analog-surround-41) D: [pulseaudio] alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround41:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround41:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround41:0 I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround41:0 I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Argument invalide D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41 D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50 D: [pulseaudio] alsa-mixer.c: Checking for playback on Surround analogique 5.0 (analog-surround-50) D: [pulseaudio] alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround50:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround50:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround50:0 I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround50:0 I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Argument invalide I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Argument invalide D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50 D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51 D: [pulseaudio] alsa-mixer.c: Checking for playback on Surround analogique 5.1 (analog-surround-51) D: [pulseaudio] alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround51:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround51:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround51:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround51:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Argument invalide I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Argument invalide D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51 D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71 D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71) D: [pulseaudio] alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround71:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open surround71:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround71:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Argument invalide D: [pulseaudio] alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open plug:surround71:0 D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Argument invalide I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Argument invalide D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71 D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71 D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo D: [pulseaudio] alsa-mixer.c: Checking for playback on Stéréo numérique (IEC958) (iec958-stereo) D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ... I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2) I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: Aucun fichier ou dossier de ce type D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40 D: [pulseaudio] alsa-mixer.c: Checking for playback on Surround numérique 4.0 (IEC958/AC3) (iec958-ac3-surround-40) D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ... I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0 I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: Aucun fichier ou dossier de ce type D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40 D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51 D: [pulseaudio] alsa-mixer.c: Checking for playback on Surround numérique 5.1 (IEC958/AC3) (iec958-ac3-surround-51) D: [pulseaudio] alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ... I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0 I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: Aucun fichier ou dossier de ce type D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51 D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51) D: [pulseaudio] alsa-util.c: Trying dca:0 with SND_PCM_NO_AUTO_FORMAT ... I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0 I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: Aucun fichier ou dossier de ce type D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51 D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51 D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo) D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hdmi:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0 I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0' D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!) D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x231f180, direction=1 D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround) D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hdmi:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 3962 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround supported. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0 I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x2356dc0, direction=1 D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra1 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra1) D: [pulseaudio] alsa-util.c: Trying hdmi:0,1 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hdmi:0,1 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra1 supported. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1 I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-1' D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=7 Jack' succeeded (found!) D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x23613b0, direction=1 D: [pulseaudio] alsa-mixer.c: Path hdmi-output-1 (HDMI / DisplayPort 2), direction=1, priority=58, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=7, alsa_name='HDMI/DP,pcm=7 Jack', detection possible D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra1+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra1+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra1 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra1) D: [pulseaudio] alsa-util.c: Trying hdmi:0,1 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hdmi:0,1 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 3962 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra1 supported. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1 I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x231e6e0, direction=1 D: [pulseaudio] alsa-mixer.c: Path hdmi-output-1 (HDMI / DisplayPort 2), direction=1, priority=58, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=7, alsa_name='HDMI/DP,pcm=7 Jack', detection possible D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra1+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra1+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra2 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra2) D: [pulseaudio] alsa-util.c: Trying hdmi:0,2 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hdmi:0,2 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra2 supported. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2 I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-2' D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=8 Jack' succeeded (found!) D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x23537c0, direction=1 D: [pulseaudio] alsa-mixer.c: Path hdmi-output-2 (HDMI / DisplayPort 3), direction=1, priority=57, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=8, alsa_name='HDMI/DP,pcm=8 Jack', detection possible D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra2+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra2+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra2 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra2) D: [pulseaudio] alsa-util.c: Trying hdmi:0,2 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open hdmi:0,2 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 3962 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra2 supported. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2 I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying): D: [pulseaudio] alsa-mixer.c: Path Set 0x235ce20, direction=1 D: [pulseaudio] alsa-mixer.c: Path hdmi-output-2 (HDMI / DisplayPort 3), direction=1, priority=57, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=8, alsa_name='HDMI/DP,pcm=8 Jack', detection possible D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:analog-mono - will not be able to open input:analog-mono D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra2+input:analog-stereo D: [pulseaudio] alsa-mixer.c: Checking for recording on Stéréo analogique (analog-stereo) D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra2+input:analog-stereo supported. D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:iec958-stereo - will not be able to open input:iec958-stereo D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra3 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo-extra3) D: [pulseaudio] alsa-util.c: Trying hdmi:0,3 with SND_PCM_NO_AUTO_FORMAT ... I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2) I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Aucun fichier ou dossier de ce type D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra3 D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-mono - will not be able to open output:hdmi-stereo-extra3 D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-stereo - will not be able to open output:hdmi-stereo-extra3 D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra3 D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra3 D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround-extra3) D: [pulseaudio] alsa-util.c: Trying hdmi:0,3 with SND_PCM_NO_AUTO_FORMAT ... I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D9p' failed (-2) I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Aucun fichier ou dossier de ce type D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra3 D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-mono - will not be able to open output:hdmi-surround-extra3 D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-stereo - will not be able to open output:hdmi-surround-extra3 D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:iec958-stereo - will not be able to open output:hdmi-surround-extra3 D: [pulseaudio] alsa-mixer.c: Profile set 0x22682e0, auto_profiles=yes, probed=yes, n_mappings=7, n_profiles=15, n_decibel_fixes=0 D: [pulseaudio] alsa-mixer.c: Mapping analog-stereo (Stéréo analogique), priority=60, channel_map=front-left,front-right, supported=yes, direction=0 D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1 D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround (Digital Surround 5.1 (HDMI)), priority=3, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1 D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo-extra1 (Digital Stereo (HDMI)), priority=52, channel_map=front-left,front-right, supported=yes, direction=1 D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround-extra1 (Digital Surround 5.1 (HDMI)), priority=1, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1 D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo-extra2 (Digital Stereo (HDMI)), priority=52, channel_map=front-left,front-right, supported=yes, direction=1 D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround-extra2 (Digital Surround 5.1 (HDMI)), priority=1, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1 D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo (Stéréo analogique Input), priority=60, supported=yes n_input_mappings=1, n_output_mappings=0 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo (Stéréo analogique Output), priority=6000, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output analog-stereo D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo (Duplex stéréo analogique), priority=6060, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output analog-stereo D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo+input:analog-stereo (Digital Stereo (HDMI) Output + Stéréo analogique Input), priority=5460, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround (Digital Surround 5.1 (HDMI) Output), priority=300, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output hdmi-surround D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround+input:analog-stereo (Digital Surround 5.1 (HDMI) Output + Stéréo analogique Input), priority=360, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output hdmi-surround D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra1 (Digital Stereo (HDMI) Output), priority=5200, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra1 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra1+input:analog-stereo (Digital Stereo (HDMI) Output + Stéréo analogique Input), priority=5260, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra1 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra1 (Digital Surround 5.1 (HDMI) Output), priority=100, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra1 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra1+input:analog-stereo (Digital Surround 5.1 (HDMI) Output + Stéréo analogique Input), priority=160, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra1 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra2 (Digital Stereo (HDMI) Output), priority=5200, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra2 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra2+input:analog-stereo (Digital Stereo (HDMI) Output + Stéréo analogique Input), priority=5260, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra2 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra2 (Digital Surround 5.1 (HDMI) Output), priority=100, supported=yes n_input_mappings=0, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra2 D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra2+input:analog-stereo (Digital Surround 5.1 (HDMI) Output + Stéréo analogique Input), priority=160, supported=yes n_input_mappings=1, n_output_mappings=1 D: [pulseaudio] alsa-mixer.c: Input analog-stereo D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra2 I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1b.0. I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_1b.0" D: [pulseaudio] module-alsa-card.c: Found 9 jacks. I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in D: [pulseaudio] device-port.c: Setting port analog-output-speaker to status no D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-speaker D: [pulseaudio] module-alsa-card.c: Jack 'Speaker Phantom Jack' is now plugged in D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status yes D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-headphones D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0 D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' is now unplugged D: [pulseaudio] device-port.c: Setting port hdmi-output-1 to status no D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-1 D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=8 Jack' is now unplugged D: [pulseaudio] device-port.c: Setting port hdmi-output-2 to status no D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-2 D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged D: [pulseaudio] module-alsa-card.c: Jack 'Internal Mic Phantom Jack' is now plugged in D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged D: [pulseaudio] device-port.c: Setting port analog-input-mic to status no D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-mic D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0' D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). I: [pulseaudio] alsa-sink.c: Successfully opened device front:0. I: [pulseaudio] alsa-sink.c: Selected mapping 'Stéréo analogique' (analog-stereo). I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0 I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Added 3 ports I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_00_1b.0.analog-stereo. I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_00_1b.0.analog-stereo: front-left: 52869 / 81%, front-right: 52869 / 81% I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_00_1b.0.analog-stereo. I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: [pulseaudio] sink.c: alsa.resolution_bits = "16" I: [pulseaudio] sink.c: device.api = "alsa" I: [pulseaudio] sink.c: device.class = "sound" I: [pulseaudio] sink.c: alsa.class = "generic" I: [pulseaudio] sink.c: alsa.subclass = "generic-mix" I: [pulseaudio] sink.c: alsa.name = "ALC269VC Analog" I: [pulseaudio] sink.c: alsa.id = "ALC269VC Analog" I: [pulseaudio] sink.c: alsa.subdevice = "0" I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0" I: [pulseaudio] sink.c: alsa.device = "0" I: [pulseaudio] sink.c: alsa.card = "0" I: [pulseaudio] sink.c: alsa.card_name = "HDA Intel PCH" I: [pulseaudio] sink.c: alsa.long_card_name = "HDA Intel PCH at 0xe4730000 irq 29" I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel" I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:1b.0" I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: [pulseaudio] sink.c: device.bus = "pci" I: [pulseaudio] sink.c: device.vendor.id = "8086" I: [pulseaudio] sink.c: device.vendor.name = "Intel Corporation" I: [pulseaudio] sink.c: device.product.id = "1e20" I: [pulseaudio] sink.c: device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" I: [pulseaudio] sink.c: device.form_factor = "internal" I: [pulseaudio] sink.c: device.string = "front:0" I: [pulseaudio] sink.c: device.buffering.buffer_size = "17632" I: [pulseaudio] sink.c: device.buffering.fragment_size = "4408" I: [pulseaudio] sink.c: device.access_mode = "mmap" I: [pulseaudio] sink.c: device.profile.name = "analog-stereo" I: [pulseaudio] sink.c: device.profile.description = "Stéréo analogique" I: [pulseaudio] sink.c: device.description = "Audio interne Stéréo analogique" I: [pulseaudio] sink.c: alsa.mixer_name = "Intel PantherPoint HDMI" I: [pulseaudio] sink.c: alsa.components = "HDA:10ec0269,11790644,00100202 HDA:80862806,11790001,00100000" I: [pulseaudio] sink.c: module-udev-detect.discovered = "1" I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci" D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_1b.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: [pulseaudio] source.c: device.description = "Monitor of Audio interne Stéréo analogique" I: [pulseaudio] source.c: device.class = "monitor" I: [pulseaudio] source.c: alsa.card = "0" I: [pulseaudio] source.c: alsa.card_name = "HDA Intel PCH" I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel PCH at 0xe4730000 irq 29" I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel" I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0" I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: [pulseaudio] source.c: device.bus = "pci" I: [pulseaudio] source.c: device.vendor.id = "8086" I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation" I: [pulseaudio] source.c: device.product.id = "1e20" I: [pulseaudio] source.c: device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" I: [pulseaudio] source.c: device.form_factor = "internal" I: [pulseaudio] source.c: device.string = "0" I: [pulseaudio] source.c: module-udev-detect.discovered = "1" I: [pulseaudio] source.c: device.icon_name = "audio-card-pci" I: [pulseaudio] alsa-sink.c: Using 4,0 fragments of size 4408 bytes (24,99ms), buffer size is 17632 bytes (99,95ms) D: [pulseaudio] alsa-sink.c: hwbuf_unused=0 D: [pulseaudio] alsa-sink.c: setting avail_min=1 D: [pulseaudio] alsa-mixer.c: Activating path analog-output D: [pulseaudio] alsa-mixer.c: Path analog-output (Sortie analogique), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=87, min_dB=-116,25, max_dB=0 D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no D: [pulseaudio] alsa-mixer.c: Jack Line Out, alsa_name='Line Out Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Line Out Phantom, alsa_name='Line Out Phantom Jack', detection unavailable I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume. I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -116,25 dB to 0,00 dB. I: [pulseaudio] alsa-sink.c: Fixing base volume to 0,00 dB I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported. I: [pulseaudio] alsa-sink.c: Using hardware mute control. D: [pulseaudio] alsa-util.c: snd_pcm_dump(): D: [pulseaudio] alsa-util.c: Soft volume PCM D: [pulseaudio] alsa-util.c: Control: PCM Playback Volume D: [pulseaudio] alsa-util.c: min_dB: -51 D: [pulseaudio] alsa-util.c: max_dB: 0 D: [pulseaudio] alsa-util.c: resolution: 256 D: [pulseaudio] alsa-util.c: Its setup is: D: [pulseaudio] alsa-util.c: stream : PLAYBACK D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED D: [pulseaudio] alsa-util.c: format : S16_LE D: [pulseaudio] alsa-util.c: subformat : STD D: [pulseaudio] alsa-util.c: channels : 2 D: [pulseaudio] alsa-util.c: rate : 44100 D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1) D: [pulseaudio] alsa-util.c: msbits : 16 D: [pulseaudio] alsa-util.c: buffer_size : 4408 D: [pulseaudio] alsa-util.c: period_size : 1102 D: [pulseaudio] alsa-util.c: period_time : 24988 D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE D: [pulseaudio] alsa-util.c: period_step : 1 D: [pulseaudio] alsa-util.c: avail_min : 1102 D: [pulseaudio] alsa-util.c: period_event : 1 D: [pulseaudio] alsa-util.c: start_threshold : -1 D: [pulseaudio] alsa-util.c: stop_threshold : 4962966789362286592 D: [pulseaudio] alsa-util.c: silence_threshold: 0 D: [pulseaudio] alsa-util.c: silence_size : 0 D: [pulseaudio] alsa-util.c: boundary : 4962966789362286592 D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel PCH' device 0 subdevice 0 D: [pulseaudio] alsa-util.c: Its setup is: D: [pulseaudio] alsa-util.c: stream : PLAYBACK D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED D: [pulseaudio] alsa-util.c: format : S16_LE D: [pulseaudio] alsa-util.c: subformat : STD D: [pulseaudio] alsa-util.c: channels : 2 D: [pulseaudio] alsa-util.c: rate : 44100 D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1) D: [pulseaudio] alsa-util.c: msbits : 16 D: [pulseaudio] alsa-util.c: buffer_size : 4408 D: [pulseaudio] alsa-util.c: period_size : 1102 D: [pulseaudio] alsa-util.c: period_time : 24988 D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE D: [pulseaudio] alsa-util.c: period_step : 1 D: [pulseaudio] alsa-util.c: avail_min : 1102 D: [pulseaudio] alsa-util.c: period_event : 1 D: [pulseaudio] alsa-util.c: start_threshold : -1 D: [pulseaudio] alsa-util.c: stop_threshold : 4962966789362286592 D: [pulseaudio] alsa-util.c: silence_threshold: 0 D: [pulseaudio] alsa-util.c: silence_size : 0 D: [pulseaudio] alsa-util.c: boundary : 4962966789362286592 D: [pulseaudio] alsa-util.c: appl_ptr : 0 D: [pulseaudio] alsa-util.c: hw_ptr : 0 D: [pulseaudio] alsa-sink.c: Requested volume: front-left: 52869 / 81% / -5,60 dB, front-right: 52869 / 81% / -5,60 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Thread starting up D: [pulseaudio] alsa-sink.c: Got hardware volume: front-left: 53167 / 81% / -5,45 dB, front-right: 53167 / 81% / -5,45 dB D: [pulseaudio] alsa-sink.c: Calculated software volume: front-left: 65169 / 99% / -0,15 dB, front-right: 65169 / 99% / -0,15 dB (accurate-enough=yes) I: [alsa-sink-ALC269VC Analog] core-util.c: Clamping rlimit-rttime to 200000 for RealtimeKit D: [alsa-sink-ALC269VC Analog] core-util.c: RealtimeKit worked. I: [alsa-sink-ALC269VC Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: [alsa-sink-ALC269VC Analog] alsa-sink.c: Starting playback. D: [pulseaudio] module-device-restore.c: Could not set format on sink alsa_output.pci-0000_00_1b.0.analog-stereo D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ... D: [pulseaudio] alsa-util.c: Managed to open front:0 D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 11888 ms D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). I: [pulseaudio] alsa-source.c: Successfully opened device front:0. I: [pulseaudio] alsa-source.c: Selected mapping 'Stéréo analogique' (analog-stereo). I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode. I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0 I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: Aucun fichier ou dossier de ce type I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0' D: [pulseaudio] alsa-mixer.c: Added 2 ports D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo. I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1b.0.analog-stereo: front-left: 52119 / 80%, front-right: 52119 / 80% I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.pci-0000_00_1b.0.analog-stereo. I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: [pulseaudio] source.c: alsa.resolution_bits = "16" I: [pulseaudio] source.c: device.api = "alsa" I: [pulseaudio] source.c: device.class = "sound" I: [pulseaudio] source.c: alsa.class = "generic" I: [pulseaudio] source.c: alsa.subclass = "generic-mix" I: [pulseaudio] source.c: alsa.name = "ALC269VC Analog" I: [pulseaudio] source.c: alsa.id = "ALC269VC Analog" I: [pulseaudio] source.c: alsa.subdevice = "0" I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0" I: [pulseaudio] source.c: alsa.device = "0" I: [pulseaudio] source.c: alsa.card = "0" I: [pulseaudio] source.c: alsa.card_name = "HDA Intel PCH" I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel PCH at 0xe4730000 irq 29" I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel" I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0" I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" I: [pulseaudio] source.c: device.bus = "pci" I: [pulseaudio] source.c: device.vendor.id = "8086" I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation" I: [pulseaudio] source.c: device.product.id = "1e20" I: [pulseaudio] source.c: device.product.name = "7 Series/C210 Series Chipset Family High Definition Audio Controller" I: [pulseaudio] source.c: device.form_factor = "internal" I: [pulseaudio] source.c: device.string = "front:0" I: [pulseaudio] source.c: device.buffering.buffer_size = "17632" I: [pulseaudio] source.c: device.buffering.fragment_size = "4408" I: [pulseaudio] source.c: device.access_mode = "mmap" I: [pulseaudio] source.c: device.profile.name = "analog-stereo" I: [pulseaudio] source.c: device.profile.description = "Stéréo analogique" I: [pulseaudio] source.c: device.description = "Audio interne Stéréo analogique" I: [pulseaudio] source.c: alsa.mixer_name = "Intel PantherPoint HDMI" I: [pulseaudio] source.c: alsa.components = "HDA:10ec0269,11790644,00100202 HDA:80862806,11790001,00100000" I: [pulseaudio] source.c: module-udev-detect.discovered = "1" I: [pulseaudio] source.c: device.icon_name = "audio-card-pci" I: [pulseaudio] alsa-source.c: Using 4,0 fragments of size 4408 bytes (24,99ms), buffer size is 17632 bytes (99,95ms) D: [pulseaudio] alsa-source.c: hwbuf_unused=0 D: [pulseaudio] alsa-source.c: setting avail_min=1 D: [pulseaudio] alsa-mixer.c: Activating path analog-input-internal-mic D: [pulseaudio] alsa-mixer.c: Path analog-input-internal-mic (Microphone interne), direction=2, priority=89, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=63, min_dB=-17,25, max_dB=60 D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Internal Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes D: [pulseaudio] alsa-mixer.c: Element Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible D: [pulseaudio] alsa-mixer.c: Jack Dock Mic, alsa_name='Dock Mic Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection unavailable D: [pulseaudio] alsa-mixer.c: Jack Internal Mic Phantom, alsa_name='Internal Mic Phantom Jack', detection possible I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume. I: [pulseaudio] alsa-source.c: Hardware volume ranges from -17,25 dB to 60,00 dB. I: [pulseaudio] alsa-source.c: Fixing base volume to -60,00 dB I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported. I: [pulseaudio] alsa-source.c: Using hardware mute control. D: [pulseaudio] alsa-util.c: snd_pcm_dump(): D: [pulseaudio] alsa-util.c: Hardware PCM card 0 'HDA Intel PCH' device 0 subdevice 0 D: [pulseaudio] alsa-util.c: Its setup is: D: [pulseaudio] alsa-util.c: stream : CAPTURE D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED D: [pulseaudio] alsa-util.c: format : S16_LE D: [pulseaudio] alsa-util.c: subformat : STD D: [pulseaudio] alsa-util.c: channels : 2 D: [pulseaudio] alsa-util.c: rate : 44100 D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1) D: [pulseaudio] alsa-util.c: msbits : 16 D: [pulseaudio] alsa-util.c: buffer_size : 4408 D: [pulseaudio] alsa-util.c: period_size : 1102 D: [pulseaudio] alsa-util.c: period_time : 24988 D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE D: [pulseaudio] alsa-util.c: period_step : 1 D: [pulseaudio] alsa-util.c: avail_min : 1102 D: [pulseaudio] alsa-util.c: period_event : 1 D: [pulseaudio] alsa-util.c: start_threshold : -1 D: [pulseaudio] alsa-util.c: stop_threshold : 4962966789362286592 D: [pulseaudio] alsa-util.c: silence_threshold: 0 D: [pulseaudio] alsa-util.c: silence_size : 0 D: [pulseaudio] alsa-util.c: boundary : 4962966789362286592 D: [pulseaudio] alsa-util.c: appl_ptr : 0 D: [pulseaudio] alsa-util.c: hw_ptr : 0 D: [alsa-source-ALC269VC Analog] alsa-source.c: Thread starting up D: [pulseaudio] alsa-source.c: Requested volume: front-left: 52119 / 80% / -5,97 dB, front-right: 52119 / 80% / -5,97 dB D: [pulseaudio] alsa-source.c: Got hardware volume: front-left: 44652 / 68% / -10,00 dB, front-right: 44652 / 68% / -10,00 dB D: [pulseaudio] alsa-source.c: Calculated software volume: front-left: 76495 / 117% / 4,03 dB, front-right: 76495 / 117% / 4,03 dB (accurate-enough=no) D: [pulseaudio] alsa-source.c: Written HW volume did not match with the request: front-left: 52119 / 80% / -5,97 dB, front-right: 52119 / 80% / -5,97 dB (request) != front-left: 44652 / 68% / -10,00 dB, front-right: 44652 / 68% / -10,00 dB D: [alsa-source-ALC269VC Analog] core-util.c: RealtimeKit worked. I: [alsa-source-ALC269VC Analog] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: [alsa-source-ALC269VC Analog] alsa-source.c: Starting capture. D: [pulseaudio] alsa-util.c: ELD info empty (for device=3) D: [pulseaudio] alsa-util.c: ELD info empty (for device=7) D: [pulseaudio] alsa-util.c: ELD info empty (for device=8) I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""). I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded. I: [pulseaudio] module-udev-detect.c: Found 1 cards. I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "tsched=0"). D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-jackdbus-detect.so': failure D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-bluetooth-policy.so': success I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: ""). D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-bluetooth-discover.so': success D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-bluez5-discover.so': success D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 5a63af4ab10b2ecac6031fd055c47c37 as :1.204 I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: ""). D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-bluez4-discover.so': failure I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: ""). D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-esound-protocol-unix.so': success I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: ""). I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: ""). D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-gconf.so': success I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: ""). D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'. D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'. I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: ""). I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: ""). I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: ""). I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #16; argument: ""). D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #17; argument: ""). D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-console-kit.so': failure D: [pulseaudio] module.c: Checking for existence of '/usr/lib64/pulse-5.0/modules/module-systemd-login.so': success I: [pulseaudio] client.c: Created 0 "Login Session c2" D: [pulseaudio] module-systemd-login.c: Added new session c2 I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #18; argument: ""). I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #19; argument: ""). D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role. D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles. I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #20; argument: ""). I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #21; argument: ""). I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #22; argument: ""). D: [pulseaudio] main.c: Got org.PulseAudio1! D: [pulseaudio] main.c: Got org.pulseaudio.Server! I: [pulseaudio] main.c: Démarrage du démon effectué. D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0. D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Introspectable found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.bluez.AgentManager1 found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.bluez.ProfileManager1 found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Introspectable found, skipping D: [pulseaudio] bluez5-util.c: Adapter /org/bluez/hci0 found D: [pulseaudio] bluez5-util.c: Registering /MediaEndpoint/A2DPSource on adapter /org/bluez/hci0 D: [pulseaudio] bluez5-util.c: Registering /MediaEndpoint/A2DPSink on adapter /org/bluez/hci0 D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Properties found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.bluez.Media1 found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.bluez.NetworkServer1 found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Introspectable found, skipping D: [pulseaudio] bluez5-util.c: Device /org/bluez/hci0/dev_A8_26_D9_F2_4F_F0 found D: [pulseaudio] bluez5-util.c: Address: A8:26:D9:F2:4F:F0 D: [pulseaudio] bluez5-util.c: Alias: a.pessoa D: [pulseaudio] bluez5-util.c: Class: 5767692 D: [pulseaudio] bluez5-util.c: UUIDs: 00001105-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000110a-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000110c-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 00001112-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000111f-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000112f-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 00001200-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 00006675-7475-7265-6469-616c62756d70 D: [pulseaudio] bluez5-util.c: Adapter: /org/bluez/hci0 D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Properties found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.bluez.MediaControl1 found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Introspectable found, skipping D: [pulseaudio] bluez5-util.c: Device /org/bluez/hci0/dev_00_1D_DF_69_53_16 found D: [pulseaudio] bluez5-util.c: Address: 00:1D:DF:69:53:16 D: [pulseaudio] bluez5-util.c: Alias: JBL Flip 2 D: [pulseaudio] bluez5-util.c: Class: 2360340 D: [pulseaudio] bluez5-util.c: UUIDs: 00001108-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000110b-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000110c-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000110e-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: UUIDs: 0000111e-0000-1000-8000-00805f9b34fb D: [pulseaudio] bluez5-util.c: Adapter: /org/bluez/hci0 D: [pulseaudio] bluez5-util.c: Unknown interface org.freedesktop.DBus.Properties found, skipping D: [pulseaudio] bluez5-util.c: Unknown interface org.bluez.MediaControl1 found, skipping D: [pulseaudio] bluez5-util.c: Properties changed in adapter /org/bluez/hci0 I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ... D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending I: [alsa-source-ALC269VC Analog] alsa-source.c: Device suspended... D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum. I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ... D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending I: [alsa-sink-ALC269VC Analog] alsa-sink.c: Device suspended... D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum. D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1b.0. I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)" D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29 I: [pulseaudio] protocol-native.c: Got credentials: uid=501 gid=501 success=1 D: [pulseaudio] protocol-native.c: SHM possible: yes D: [pulseaudio] protocol-native.c: Negotiated SHM: yes D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for squeezelite I: [pulseaudio] client.c: Freed 1 "ALSA plug-in [squeezelite]" I: [pulseaudio] protocol-native.c: Connection died. I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)" D: [pulseaudio] protocol-native.c: Protocol version: remote 29, local 29 I: [pulseaudio] protocol-native.c: Got credentials: uid=501 gid=501 success=1 D: [pulseaudio] protocol-native.c: SHM possible: yes D: [pulseaudio] protocol-native.c: Negotiated SHM: yes D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for squeezelite D: [pulseaudio] module-intended-roles.c: Not setting device for stream ALSA Playback, because it lacks role. D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"s32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\"" I: [pulseaudio] sink-input.c: Trying to change sample rate I: [pulseaudio] sink-input.c: Rate changed to 44100 Hz I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:ALSA plug-in [squeezelite]. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming. D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0' I: [alsa-sink-ALC269VC Analog] alsa-sink.c: Trying resume... D: [alsa-sink-ALC269VC Analog] alsa-util.c: Maximum hw buffer size is 11888 ms D: [alsa-sink-ALC269VC Analog] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples). D: [alsa-sink-ALC269VC Analog] alsa-sink.c: hwbuf_unused=0 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: setting avail_min=1 I: [alsa-sink-ALC269VC Analog] alsa-sink.c: Resumed successfully... D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. I: [alsa-sink-ALC269VC Analog] alsa-sink.c: Starting playback. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates. D: [pulseaudio] resampler.c: Resampler: D: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy) D: [pulseaudio] resampler.c: format s32le -> s16le (intermediate s16le) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] sink-input.c: Created input 0 "ALSA Playback" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec s32le 2ch 44100Hz and channel map front-left,front-right I: [pulseaudio] sink-input.c: media.name = "ALSA Playback" I: [pulseaudio] sink-input.c: application.name = "ALSA plug-in [squeezelite]" I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] sink-input.c: native-protocol.version = "29" I: [pulseaudio] sink-input.c: application.process.id = "4839" I: [pulseaudio] sink-input.c: application.process.user = "antonio" I: [pulseaudio] sink-input.c: application.process.host = "magneto" I: [pulseaudio] sink-input.c: application.process.binary = "squeezelite" I: [pulseaudio] sink-input.c: application.language = "C" I: [pulseaudio] sink-input.c: window.x11.display = ":0" I: [pulseaudio] sink-input.c: application.process.machine_id = "206a9f828056473a974e051c9e227d65" I: [pulseaudio] sink-input.c: application.process.session_id = "c2" I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [squeezelite]" I: [pulseaudio] protocol-native.c: Requested tlength=40,00 ms, minreq=10,00 ms D: [pulseaudio] protocol-native.c: Early requests mode enabled, configuring sink latency to minreq. D: [pulseaudio] protocol-native.c: Requested latency=10,00 ms, Received latency=99,95 ms D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=105792, base=8, prebuf=3528, minreq=35256 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=105792, base=8, prebuf=3528, minreq=35256 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 399,82 ms = 100,00 ms + 2*99,93 ms + 99,95 ms D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested volume: front-left: 42589 / 65% / -11,23 dB, front-right: 42589 / 65% / -11,23 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Got hardware volume: front-left: 42804 / 65% / -11,10 dB, front-right: 42804 / 65% / -11,10 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Calculated software volume: front-left: 65207 / 99% / -0,13 dB, front-right: 65207 / 99% / -0,13 dB (accurate-enough=yes) D: [alsa-sink-ALC269VC Analog] sink.c: Volume going down to 42589 at 313286659 D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92780 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92762 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92752 usec D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92712 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92606 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92584 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92569 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 92531 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 82293 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 82185 usec D: [alsa-sink-ALC269VC Analog] sink.c: Next volume change in 82164 usec D: [alsa-sink-ALC269VC Analog] sink.c: Volume change to 42589 at 313286659 was written 68 usec late D: [alsa-sink-ALC269VC Analog] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested to rewind 17632 bytes. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Limited to 17376 bytes. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: before: 4344 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: after: 4344 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Rewound 17376 bytes. D: [alsa-sink-ALC269VC Analog] sink.c: Processing rewind... D: [alsa-sink-ALC269VC Analog] sink.c: latency = 2355 D: [alsa-sink-ALC269VC Analog] sink-input.c: Have to rewind 17376 bytes on render memblockq. D: [alsa-sink-ALC269VC Analog] source.c: Processing rewind... D: [alsa-sink-ALC269VC Analog] protocol-native.c: Implicit underrun of 'ALSA Playback' D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15644 bytes ago (1988 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15644 bytes ago (1988 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15644 bytes ago (1988 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested volume: front-left: 52869 / 81% / -5,60 dB, front-right: 52869 / 81% / -5,60 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Got hardware volume: front-left: 53167 / 81% / -5,45 dB, front-right: 53167 / 81% / -5,45 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Calculated software volume: front-left: 65169 / 99% / -0,15 dB, front-right: 65169 / 99% / -0,15 dB (accurate-enough=yes) D: [alsa-sink-ALC269VC Analog] sink.c: Volume going up to 52869 at 313404066 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested to rewind 17632 bytes. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Limited to 17376 bytes. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: before: 4344 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: after: 4344 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Rewound 17376 bytes. D: [alsa-sink-ALC269VC Analog] sink.c: Processing rewind... D: [alsa-sink-ALC269VC Analog] sink.c: latency = 2251 D: [alsa-sink-ALC269VC Analog] source.c: Processing rewind... D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum. I: [pulseaudio] sink-input.c: Freeing input 0 "ALSA Playback" D: [pulseaudio] module-intended-roles.c: Not setting device for stream ALSA Playback, because it lacks role. D: [pulseaudio] sink-input.c: Negotiated format: pcm, format.sample_format = "\"s32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\"" I: [pulseaudio] sink-input.c: Trying to change sample rate I: [pulseaudio] sink-input.c: Rate changed to 44100 Hz I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-application-name:ALSA plug-in [squeezelite]. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy, resuming. D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds. I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates. D: [pulseaudio] resampler.c: Resampler: D: [pulseaudio] resampler.c: rate 44100 -> 44100 (method copy) D: [pulseaudio] resampler.c: format s32le -> s16le (intermediate s16le) D: [pulseaudio] resampler.c: channels 2 -> 2 (resampling 2) D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 I: [pulseaudio] sink-input.c: Created input 1 "ALSA Playback" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec s32le 2ch 44100Hz and channel map front-left,front-right I: [pulseaudio] sink-input.c: media.name = "ALSA Playback" I: [pulseaudio] sink-input.c: application.name = "ALSA plug-in [squeezelite]" I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client" I: [pulseaudio] sink-input.c: native-protocol.version = "29" I: [pulseaudio] sink-input.c: application.process.id = "4839" I: [pulseaudio] sink-input.c: application.process.user = "antonio" I: [pulseaudio] sink-input.c: application.process.host = "magneto" I: [pulseaudio] sink-input.c: application.process.binary = "squeezelite" I: [pulseaudio] sink-input.c: application.language = "C" I: [pulseaudio] sink-input.c: window.x11.display = ":0" I: [pulseaudio] sink-input.c: application.process.machine_id = "206a9f828056473a974e051c9e227d65" I: [pulseaudio] sink-input.c: application.process.session_id = "c2" I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [squeezelite]" I: [pulseaudio] protocol-native.c: Requested tlength=40,00 ms, minreq=10,00 ms D: [pulseaudio] protocol-native.c: Early requests mode enabled, configuring sink latency to minreq. D: [pulseaudio] protocol-native.c: Requested latency=10,00 ms, Received latency=99,95 ms D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=105792, base=8, prebuf=3528, minreq=35256 maxrewind=0 D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=105792, base=8, prebuf=3528, minreq=35256 maxrewind=0 I: [pulseaudio] protocol-native.c: Final latency 399,82 ms = 100,00 ms + 2*99,93 ms + 99,95 ms D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested volume: front-left: 42589 / 65% / -11,23 dB, front-right: 42589 / 65% / -11,23 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Got hardware volume: front-left: 42804 / 65% / -11,10 dB, front-right: 42804 / 65% / -11,10 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Calculated software volume: front-left: 65207 / 99% / -0,13 dB, front-right: 65207 / 99% / -0,13 dB (accurate-enough=yes) D: [alsa-sink-ALC269VC Analog] sink.c: Volume going down to 42589 at 313388973 D: [alsa-sink-ALC269VC Analog] sink.c: Volume change to 52869 at 313305569 was written 30 usec late E: [alsa-sink-ALC269VC Analog] alsa-sink.c: ALSA nous a réveillé pour écrire de nouvelles données à partir du périphérique, mais il n'y avait en fait rien à écrire ! E: [alsa-sink-ALC269VC Analog] alsa-sink.c: Il s'agit très probablement d'un bogue dans le pilote ALSA « snd_hda_intel ». Veuillez rapporter ce problème aux développeurs d'ALSA. E: [alsa-sink-ALC269VC Analog] alsa-sink.c: Nous avons été réveillés avec POLLOUT actif, cependant un snd_pcm_avail() ultérieur a retourné 0 ou une autre valeur < min_avail. D: [alsa-sink-ALC269VC Analog] sink.c: Volume change to 42589 at 313388973 was written 77 usec late D: [alsa-sink-ALC269VC Analog] protocol-native.c: Requesting rewind due to end of underrun. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested to rewind 17632 bytes. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Limited to 17376 bytes. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: before: 4344 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: after: 4344 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Rewound 17376 bytes. D: [alsa-sink-ALC269VC Analog] sink.c: Processing rewind... D: [alsa-sink-ALC269VC Analog] sink.c: latency = 2321 D: [alsa-sink-ALC269VC Analog] sink-input.c: Have to rewind 17376 bytes on render memblockq. D: [alsa-sink-ALC269VC Analog] source.c: Processing rewind... D: [alsa-sink-ALC269VC Analog] protocol-native.c: Implicit underrun of 'ALSA Playback' D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15644 bytes ago (1988 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15644 bytes ago (1988 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15644 bytes ago (1988 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15676 bytes ago (1956 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15708 bytes ago (1924 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15740 bytes ago (1892 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] sink.c: Found underrun 15740 bytes ago (1892 bytes ahead in playback buffer) D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested volume: front-left: 52869 / 81% / -5,60 dB, front-right: 52869 / 81% / -5,60 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Got hardware volume: front-left: 53167 / 81% / -5,45 dB, front-right: 53167 / 81% / -5,45 dB D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Calculated software volume: front-left: 65169 / 99% / -0,15 dB, front-right: 65169 / 99% / -0,15 dB (accurate-enough=yes) D: [alsa-sink-ALC269VC Analog] sink.c: Volume going up to 52869 at 313506365 D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Requested to rewind 17632 bytes. D: [alsa-sink-ALC269VC Analog] alsa-sink.c: Limited to 17376 bytes.
_______________________________________________ pulseaudio-discuss mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
