On 12.08.2015 17:17, Mallory Daries wrote:
Hi,
I'm currently integrating in Yocto pulseaudio 6.0 with bluez 5.28 and ofono
1.16 on a Nitrogen6x board (with dongle bluetooth Belkin).
My purpose is to use the board as handsfree gateway:
with a smartphone connected via bluetooth redirect the sound of a voicecall
from the smartphone to the board output (HFP profile).
I already got it work on my computer as I can hear the voicecall with the
computer's speaker as output and use the integrated microphone as input.
I'm using Pulseaudio launched as a user-instance with the backend ofono.
I had strange behaviour testing it :
After connecting my phone with bluetoothctl pulseaudio create an HF card and I
got the same output as on my computer where HFP is working
D: [pulseaudio] bluez5-util.c: oFono is running: yes
D: [pulseaudio] backend-ofono.c: New HF card found: /card_4
D: [pulseaudio] backend-ofono.c: RemoteAddress: 40:A6:D9:6E:1B:73
D: [pulseaudio] backend-ofono.c: LocalAddress: 00:0A:3A:7A:3A:58
D: [pulseaudio] bluez5-util.c: Transport /card_4 state changed from
disconnected to idle
D: [pulseaudio] module-bluez5-discover.c: Loading module-bluez5-device
path=/org/bluez/hci0/dev_40_A6_D9_6E_1B_73
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card
bluez_card.40_A6_D9_6E_1B_73.
I: [pulseaudio] card.c: Created 1 "bluez_card.40_A6_D9_6E_1B_73"
D: [pulseaudio] module-bluez5-device.c: Acquiring transport /card_4
E: [pulseaudio] backend-ofono.c: Deferred setup failed on fd -1: Transport
endpoint is not connected
I dial a number on my phone and it works well at the first try, the audio is
routed to the output of the board.(see pulseaudio_log_success_HFP)
Then, I hangup the call and make a second try, and the problems are coming :
pulseaudio loops for few minutes in the following :
I: [alsa-sink-HiFi sgtl5000-0] module-loopback.c: Could not peek into queue
D: [bluetooth] module-loopback.c: Requesting rewind due to end of underrun.
and I also have this kind of messages with dmesg :
Bluetooth: hci0 SCO packet for unknown connection handle 0
Bluetooth: Unexpected continuation frame (len 0)
Bluetooth: Unexpected continuation frame (len 0)
Bluetooth: Unexpected continuation frame (len 0)
No sound can be heard in that case.
Any help would be appreciated !
Ask me for any further information that could be useful.
Mallory
Hi Mallory,
use another dongle! I also tried first with a Belkin dongle and had
massive problems.
My very old other dongles work fine and I bought a Gembird V.2.1 dongle
which also
works perfectly.
Regards
Georg
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
