I found that there was actually newer firmware available, so I've flashed it and after this with some adjustments to configuration (some internal naming has changed) everything works flawlessly.
Changes are not disruptive, so I hope distributives like Ubuntu can backport this patch into their stable versions (at least to 16.04 in case of Ubuntu, since PulseAudio 8 is what will be shipped with it for many years to come).
Sorry for bothering everyone with this not very widespread among Linux users sound card, special thank Raymond Yau, I would never be able to fix anything without you:)
Sincerely, Nazar Mokrynskyi github.com/nazar-pc Skype: nazar-pc Diaspora:[email protected] Tox: A9D95C9AA5F7A3ED75D83D0292E22ACE84BA40E912185939414475AF28FD2B2A5C8EF5261249 On 24.03.16 15:59, Nazar Mokrynskyi wrote:
`Mic` is now detected as `Mic-In/Mic Array` (there are 2 microphones physically, nice to se this being understood). `Line` is now detected as `Line In`. Removed all output modes except officially supported stereo, 5.1 and stereo S/PDIF. Also microphone/line in now might be used simultaneously with either output mode, yay! --- src/modules/alsa/mixer/paths/analog-input-linein.conf | 4 ++++ src/modules/alsa/mixer/paths/analog-input-mic.conf | 4 ++++ .../alsa/mixer/profile-sets/sb-omni-surround-5.1.conf | 17 ++--------------- 3 files changed, 10 insertions(+), 15 deletions(-) diff --git a/src/modules/alsa/mixer/paths/analog-input-linein.conf b/src/modules/alsa/mixer/paths/analog-input-linein.conf index 2c94a0b..8163ffb 100644 --- a/src/modules/alsa/mixer/paths/analog-input-linein.conf +++ b/src/modules/alsa/mixer/paths/analog-input-linein.conf @@ -69,6 +69,10 @@ enumeration = select name = analog-input-linein required-any = any+[Option PCM Capture Source:Line In]+name = analog-input-linein +required-any = any + [Element Mic] switch = off volume = off diff --git a/src/modules/alsa/mixer/paths/analog-input-mic.conf b/src/modules/alsa/mixer/paths/analog-input-mic.conf index 4d64f92..123439b 100644 --- a/src/modules/alsa/mixer/paths/analog-input-mic.conf +++ b/src/modules/alsa/mixer/paths/analog-input-mic.conf @@ -76,6 +76,10 @@ enumeration = select name = analog-input-microphone required-any = any+[Option PCM Capture Source:Mic-In/Mic Array]+name = analog-input-microphone +required-any = any + ;;; Some AC'97s have "Mic Select" and "Mic Boost (+20dB)"[Element Mic Select]diff --git a/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf b/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf index e534def..d5922da 100644 --- a/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf +++ b/src/modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf @@ -20,7 +20,8 @@ ; This config supports both cases. ; Also by default there are some non-existing (physically) inputs ; and outputs that are not present here. -; And finally in 2.1 mode LFE is not working, so it is removed also. +; And finally officially supported modes are stereo and 5.1 + stereo S/PDIF, +; so only these modes included. ; ; See default.conf for an explanation on the directives used here.@@ -42,20 +43,6 @@ paths-input = analog-input-mic analog-input-lineinchannel-map = left,right direction = input-[Mapping analog-surround-41]-device-strings = surround41:%f -channel-map = front-left,front-right,rear-left,rear-right,lfe -paths-output = analog-output -priority = 7 -direction = output - -[Mapping analog-surround-50] -device-strings = surround50:%f -channel-map = front-left,front-right,rear-left,rear-right,front-center -paths-output = analog-output -priority = 8 -direction = output - [Mapping analog-surround-51] device-strings = surround51:%f channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
smime.p7s
Description: Кріптографічний підпис S/MIME
_______________________________________________ pulseaudio-discuss mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
