Sorry, I should have said that I tried pactl.exe to set
set-port-latency-offset, but it always says:
Failure: No such entity
For example:
> pactl.exe set-port-latency-offset 1 audio-card 1000000
Failure: No such entity
FYI, I did these commands:
> pactl.exe list sources
Source #0
State: SUSPENDED
Name: output.monitor
Description: Monitor of WaveOut on Microsoft Sound Mapper
Driver: module-waveout.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 5
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536
/ 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: output
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of WaveOut on Microsoft
Sound Mapper"
device.class = "monitor"
device.icon_name = "audio-input-microphone"
Formats:
pcm
Source #1
State: SUSPENDED
Name: input
Description: WaveIn on Microsoft Sound Mapper
Driver: module-waveout.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536
/ 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
device.description = "WaveIn on Microsoft Sound Mapper"
device.icon_name = "audio-input-microphone"
Formats:
pcm
And:
> pactl.exe list sinks
Sink #0
State: SUSPENDED
Name: output
Description: WaveOut on Microsoft Sound Mapper
Driver: module-waveout.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 5
Mute: no
Volume: front-left: 31613 / 48%, front-right: 31613 / 48%
balance 0.00
Base Volume: 65536 / 100%
Monitor Source: output.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_VOLUME_CTRL LATENCY
Properties:
device.description = "WaveOut on Microsoft Sound Mapper"
device.icon_name = "audio-card"
Formats:
pcm
On 07/25/2016 08:52 AM, Arun Raghavan wrote:
On Mon, 25 Jul 2016, at 09:17 PM, Doug McCasland wrote:
That setting requires card and port args, but when I do this command (in
Windows):
pacmd.exe list-cards
0 card(s) available.
I tried using card index 0 (zero) and "audio-card" for port and it says:
Failure: No such entity
Could you try using pactl instead?
-- Arun
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
--
Doug McCasland
San Francisco
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
