On Sun, 2017-08-20 at 10:41 +0000, Mark Raynsford wrote: > Hello. > > I've been using Pulse's network support for about a year now. My main > desktop machine acts as a server and I pipe the audio from various > devices (laptops, etc) into the server using module-tunnel-sink. I > work on software that produces audio and this setup allows me to have a > single pair of headphones without having to plug everything into a > hardware mixer. > > Today, I decided that I was going to give the JACK audio server another > look. The intention is to have JACK be the main audio server on my > machine, and to connect Pulse to it as a client. This means that > programs that use JACK natively get a JACK server, and programs that > only speak Pulse (or ALSA) get transparently piped into the JACK server. > > I'm on Arch Linux. I installed the jack2 and pulseaudio-jack packages, > followed the instructions, and everything is working correctly. > pavucontrol shows a "PulseAudio JACK Sink" that Pulse programs use > without issue. JACK applications work properly. All good! > > One problem: My TCP tunnels no longer work. When a device connects to > the Pulse server on my desktop, this is what I see: > > > > > list-sink-inputs > > 1 sink input(s) available. > index: 10 > driver: <protocol-native.c> > flags: DONT_MOVE > state: DRAINED > sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo> > volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% > / 0.00 dB > balance 0.00 > muted: no > current latency: 150.00 ms > requested latency: 24.99 ms > sample spec: s16le 2ch 44100Hz > channel map: front-left,front-right > Stereo > resample method: copy > module: 10 > client: 15 <pulseaudio> > properties: > media.name = "Built-in Audio Analog Stereo for > someone@pseudechis" > media.role = "abstract" > application.name = "pulseaudio" > native-protocol.peer = "TCP/IP client from 10.2.21.1:33166" > native-protocol.version = "32" > application.id = "org.PulseAudio.PulseAudio" > application.version = "10.0" > application.process.id = "19038" > application.process.user = "someone" > application.process.host = "pseudechis" > application.process.binary = "pulseaudio" > application.language = "en_GB.UTF-8" > window.x11.display = ":0" > application.process.machine_id = > "b5289f58652b413a8b3b8d465ad7d696" > module-stream-restore.id = "sink-input-by-media-role:abstract" > > In the Playback section of pavucontrol, there's an entry for > "Built-in Audio Analog Stereo for someone@pseudechis" and the small drop-down > menu > that is supposed to allow me to select an output lists > "Built-in Audio Analog Stereo" and "Jack sink (PulseAudio JACK Sink)". > Unfortunately, > trying to select the JACK sink from the menu has no effect - the output stays > as "Built-in Audio Analog Stereo". In effect I get silence, as the audio from > the > client is not being sent to the JACK sink. I'm not familiar with the internal > workings > of Pulse, but I'm guessing the DONT_MOVE flag has something to do with this. > > What's the correct way to get my network audio working again?
I would guess that you're loading module-tunnel-sink without the "sink" parameter, so it will connect to the default sink of the remote server, in this case the alsa sink. Pass "sink=NAME" to module-tunnel-sink when you load it. Replace NAME with the name of the jack sink. -- Tanu https://www.patreon.com/tanuk _______________________________________________ pulseaudio-discuss mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
