On Sat, Apr 27, 2019 at 5:27 AM Tanu Kaskinen <ta...@iki.fi> wrote: > On Fri, 2019-04-26 at 07:37 -0500, Matt Zagrabelny wrote: > > On Fri, Apr 26, 2019 at 4:28 AM Tanu Kaskinen <ta...@iki.fi> wrote: > > > > > > Card #1 > > > > Name: alsa_card.pci-0000_00_14.2 > > > > > > ... > > > > > > > Ports: > > > > > > ... > > > > > > > analog-output-lineout: Line Out (priority: 9900, > latency > > > > offset: 0 usec, not available) > > > > Part of profile(s): output:analog-stereo, > > > > output:analog-stereo+input:analog-stereo, output:analog-surround-21, > > > > output:analog-surround-21+input:analog-stereo, > output:analog-surround-40, > > > > output:analog-surround-40+input:analog-stereo, > output:analog-surround-41, > > > > output:analog-surround-41+input:analog-stereo, > output:analog-surround-50, > > > > output:analog-surround-50+input:analog-stereo, > output:analog-surround-51, > > > > output:analog-surround-51+input:analog-stereo, > output:analog-surround-71, > > > > output:analog-surround-71+input:analog-stereo > > > > analog-output-headphones: Headphones (priority: 9000, > > > > latency offset: 0 usec, not available) > > > > Properties: > > > > device.icon_name = "audio-headphones" > > > > Part of profile(s): output:analog-stereo, > > > > output:analog-stereo+input:analog-stereo > > > > iec958-stereo-output: Digital Output (S/PDIF) > (priority: > > > 0, > > > > latency offset: 0 usec) > > > > Part of profile(s): output:iec958-stereo, > > > > output:iec958-stereo+input:analog-stereo > > > > > > Both analog ports are marked as "not available", which means that to > > > PulseAudio looks like nothing is plugged in in either connector. This > > > is the reason why PulseAudio always picks the digital output on boot. > > > Broken jack detection is is a hardware or driver issue, which can be > > > worked around, see below. > > > > > > > Ahhh. Understood. > > > > > > > > > while read -r line; do amixer -c0 cget "$line"; done <<< > $(amixer > > > -c0 > > > > > controls | grep Jack) > > > > > > > > > > > > > numid=1,iface=CARD,name='HDMI/DP,pcm=3 Jack' > > > > ; type=BOOLEAN,access=r-------,values=1 > > > > : values=on > > > > numid=7,iface=CARD,name='HDMI/DP,pcm=7 Jack' > > > > ; type=BOOLEAN,access=r-------,values=1 > > > > : values=off > > > > > > It seems that I guessed wrong the card number. Card 0 seems to be the > > > HDMI card, while we're interested in the analog sound card, which is > > > alsa card 1. So change the script to this: > > > > > > while read -r line; do amixer -c0 cget "$line"; done <<< $(amixer > -c0 > > > controls | grep Jack) > > > > > > > I'm guessing I should change the above -c0's to -c1's. > > Oops! Yes, that's what I meant. > > > Here is that output: > > > > numid=44,iface=CARD,name='CD Phantom Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=on > > numid=49,iface=CARD,name='Front Headphone Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=42,iface=CARD,name='Front Mic Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=43,iface=CARD,name='Line Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=47,iface=CARD,name='Line Out CLFE Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=45,iface=CARD,name='Line Out Front Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=48,iface=CARD,name='Line Out Side Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=46,iface=CARD,name='Line Out Surround Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=41,iface=CARD,name='Rear Mic Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > numid=50,iface=CARD,name='SPDIF Jack' > > ; type=BOOLEAN,access=r-------,values=1 > > : values=off > > Okay, the relevant jacks are "Front Headphone" and "Line Out Front". I > don't know if you're trying to use the headphone or the line out port, > but if you can disable jack detection for both: >
Empirical evidence suggests I am using Line Out. Thanks for all the help. It works great! -m
_______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
