open a terminal and run the following commands - cut and paste the results back into this mail and we can have a closer look to see if you have a hardware problem
lspci -v | grep audio lspci -v | grep snd lsmod | grep snd also what puredyne are you using full debian install, live cd, live usb ? cheers rob Shihpin Lin said : > > > Rob, > > Thanks for the information about qjackctl. I tried it since JACK audio server > needs to be running if you want to run Supercollider. > > I pressed start button, but it quits one second later with this error message: > > Error -JACK Connection Kit > > Could not connect to JACK server as client. > > -overall operation failed. > > -unable to connect to server. > > Please check the messages window to for more info > > ---------------------------------- > > Can someone give a hint on how to get JACK server going? > > Thanks so much, > > Shihpin Lin > > > > > --- On Thu, 5/14/09, Rob Canning <[email protected]> wrote: > > > From: Rob Canning <[email protected]> > > Subject: Re: [pure:dyne] Can't find Supercollider > > To: "p:d" <[email protected]> > > Date: Thursday, May 14, 2009, 5:08 PM > > Rob Canning said : > > > Shihpin Lin said : > > > > > > > > > > > > > > > > > > mplayer > > /usr/share/sounds/alsa/Noise.wav > > > > > > > > Thanks Rob, I will try it when I come home from > > work today. > > > > > > > > And Antonios, > > > > > > > > How can I check whether JACK audio server is > > running? > > > > It will be great if you or others can show me the > > steps to confirm JACK audio server. > > > > > > you need to start it - easiest way is to start an > > application call qjackctl and > > > press the start button... > > > if you google this or check the documentation you will > > find there is > > > plenty out there :) > > > > http://code.goto10.org/projects/puredyne/wiki/audio-workshop-jack > > > > > > > > > > > > > Shihpin Lin > > > > > > > > > > > > --- On Thu, 5/14/09, Antonios Galanopoulos <[email protected]> > > wrote: > > > > > > > > > From: Antonios Galanopoulos <[email protected]> > > > > > Subject: Re: [pure:dyne] Can't find > > Supercollider > > > > > To: "p:d" <[email protected]> > > > > > Date: Thursday, May 14, 2009, 10:50 AM > > > > > Also make sure that JACK audio server > > > > > is running. SC3 is using it to make > > > > > sounds. > > > > > > > > > > a > > > > > Rob Canning said : > > > > > > Shihpin Lin said : > > > > > > > > > > > > > > Hi Ahmet, > > > > > > > > > > > > > > Thanks for the details! I was able > > to switch to > > > > > the supercollider mode on gedit. > > > > > > > > > > > > > > One remaining problem is how to > > get the sound to > > > > > come out. > > > > > > > > > > > > > > I openned a document and typed: > > > > > > > > > > > > > > {SinOsc.ar(440,0,1).dup}.play; > > > > > > > > > > > > > > I highlighted it and chose > > "evaluate", > > > > > > > > > > > > > > but nothing happens. I chose > > "Start Server" and > > > > > evaluated, but > > > > > > > > > > > > > > nothing happens, not even error > > message. > > > > > > > > > > > > > > It's like SC is not responding. > > > > > > > > > > > > > > How can I get the interpretor to > > respond? > > > > > > > > > > > > > > And how can I test whether sound > > function of > > > > > Puredyne is working? > > > > > > > > > > > > try this to test if the sound is > > working > > > > > > > > > > > > mplayer > > /usr/share/sounds/alsa/Noise.wav > > > > > > > > > > > > > > > > > > > > Thanks a lot, > > > > > > > > > > > > > > Shihpin Lin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- On Thu, 5/14/09, Ahmet Kizilay > > <[email protected]> > > > > > wrote: > > > > > > > > > > > > > > > From: Ahmet Kizilay <[email protected]> > > > > > > > > Subject: Re: [pure:dyne] > > Can't find > > > > > Supercollider > > > > > > > > To: "p:d" <[email protected]> > > > > > > > > Date: Thursday, May 14, 2009, > > 4:47 AM > > > > > > > > I am sorry for not being > > clear. > > > > > > > > gedit command will open an > > editor > > > > > application. Find > > > > > > > > Preferences under Edit menu > > (I think). Then > > > > > on the plugins > > > > > > > > tab find sced and click on > > it. > > > > > > > > then go to tools menu and > > there you will see > > > > > SuperCollider > > > > > > > > mode.. You can also enable > > SuperCollider > > > > > highlighting from > > > > > > > > one of the menus, I dont > > remember > > > > > > > > > > > > > > > > the exact path, but it is > > very easy to > > > > > figure out. > > > > > > > > ahmet kizilay > > > > > > > > > > > > > > > > > > > > > > > > On Thu, May 14, 2009 at 2:39 > > PM, > > > > > > > > Shihpin Lin <[email protected]> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Ahmet, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi, is your method available > > somewhere on > > > > > the web? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > It's a bit lacking in > > details. How can I > > > > > enable the > > > > > > > > sced plugin? What do I have > > to do to switch > > > > > to the > > > > > > > > supercollider mode? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If others know easier way, > > please share > > > > > it... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Shihpin Lin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- On Thu, 5/14/09, Ahmet > > Kizilay <[email protected]> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: Ahmet Kizilay > > <[email protected]> > > > > > > > > > > > > > > > > > Subject: Re: [pure:dyne] > > Can't find > > > > > Supercollider > > > > > > > > > > > > > > > > > To: "p:d" <[email protected]> > > > > > > > > > > > > > > > > > Date: Thursday, May 14, > > 2009, 4:30 AM > > > > > > > > > > > > > > > > > hello, > > > > > > > > > > > > > > > > > (I am a beginner too) > > > > > > > > > > > > > > > > > I start gedit on the > > command line, then > > > > > enable the > > > > > > > > sced > > > > > > > > > > > > > > > > > plugin and finally > > switch to the > > > > > supercollider > > > > > > > > mode... > > > > > > > > > > > > > > > > > ahmet kizilay > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Thu, May 14, 2009 at > > 2:25 PM, > > > > > > > > > > > > > > > > > Shihpin Lin <[email protected]> > > > > > > > > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hello Puredyne users and > > developers, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am typing this from > > Tokyo, Japan. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am relatively new to > > Puredyne. I just > > > > > burned Leek > > > > > > > > and > > > > > > > > > > > > > > > > > Potato version on > > CD-ROM. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I want to start > > Supercollider3, and I > > > > > right-clicked > > > > > > > > and > > > > > > > > > > > > > > > > > looked for SC3 under > > multimedia but I > > > > > could not find > > > > > > > > it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > How are others launching > > SC? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Your help appreciated, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Shihpin Lin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > irc.goto10.org > > #pure:dyne > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Inline Attachment > > Follows----- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > > irc.goto10.org > > #pure:dyne > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > > > > > > > > > > [email protected] > > > > > > > > > > > > > > > > irc.goto10.org #pure:dyne > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Inline Attachment > > Follows----- > > > > > > > > > > > > > > > > --- > > > > > > > > [email protected] > > > > > > > > irc.goto10.org #pure:dyne > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > > [email protected] > > > > > > > irc.goto10.org #pure:dyne > > > > > > > > > > > > > -------------- > > > > > > [email protected] > > > > > > rob.goto10.org > > > > > > -------------- > > > > > > > > > > > > > > > > > > > > > --- > > > > > > [email protected] > > > > > > irc.goto10.org #pure:dyne > > > > > | > > > > > |'`'. > > > > > .''. > > > > > .. > > > > > | ' > > > > > .' '. .` '. > > > > > |-----`.----.'------- '------------. > > > > > | '..' > > > > > `. ' > > > > > | > > > > > `..' > > > > > | > > > > > > > > > > --- > > > > > [email protected] > > > > > irc.goto10.org #pure:dyne > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > [email protected] > > > > irc.goto10.org #pure:dyne > > > > > > > -------------- > > > [email protected] > > > rob.goto10.org > > > -------------- > > > > > > > > > --- > > > [email protected] > > > irc.goto10.org #pure:dyne > > -------------- > > [email protected] > > rob.goto10.org > > -------------- > > > > -----Inline Attachment Follows----- > > > > --- > > [email protected] > > irc.goto10.org #pure:dyne > > > > > --- > [email protected] > irc.goto10.org #pure:dyne > -------------- [email protected] rob.goto10.org --------------
signature.asc
Description: Digital signature
--- [email protected] irc.goto10.org #pure:dyne
