Thanks Chun,
Right and Left click at the same time did the work!
Thanks!!
And Rob,
Here the results of commands you showed me:
--------------------------------
lint...@puredyne:~$ lspci -v | grep audio
00:0a.0 Multimedia audio controller: Yamaha Corporation YMF-754 [DS-1E Audio Con
troller]
lint...@puredyne:~$ lspci -v | grep snd
Kernel modules: snd-via82xx-modem
Kernel modules: snd-ymfpci
lint...@puredyne:~$ lsmod | grep snd
snd_mixer_oss 18048 0
snd_opl3_lib 13312 0
snd_hwdep 10756 1 snd_opl3_lib
snd_mpu401_uart 9856 0
snd_seq_midi 9376 0
snd_seq_midi_event 8704 1 snd_seq_midi
snd_via82xx_modem 17160 0
snd_ac97_codec 129056 1 snd_via82xx_modem
snd_rawmidi 26784 2 snd_mpu401_uart,snd_seq_midi
ac97_bus 3328 1 snd_ac97_codec
snd_pcm 83204 2 snd_via82xx_modem,snd_ac97_codec
snd_seq 59344 2 snd_seq_midi,snd_seq_midi_event
snd_timer 25988 3 snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 9740 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
snd 67748 11 snd_mixer_oss,snd_opl3_lib,snd_hwdep,snd_mpu401
_uart,snd_via82xx_modem,snd_ac97_codec,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd
_seq_device
snd_page_alloc 11528 2 snd_via82xx_modem,snd_pcm
soundcore 9952 1 snd
-----------------------------------------------
Hope you or someone cane help me get JACK going!!
Shihpin Lin
--- On Sat, 5/16/09, Chun Lee <[email protected]> wrote:
> From: Chun Lee <[email protected]>
> Subject: Re: [pure:dyne] Can't find Supercollider
> To: "p:d" <[email protected]>
> Date: Saturday, May 16, 2009, 9:07 PM
>
> hi Lin:
>
> Shihpin Lin said :
> >
> >
> > Hi Rob,
> >
> > The copy and paste (Ctrl-c -> Ctrl-v) function I
> use in MS-Windows doesn't work. How can I perform copy and
> paste in Puredyne?
> >
>
> select the text you want to copy (as you would do before
> Ctrl-c)
>
> then use the middle click of your mouse to paste the
> selected text, if you are on laptop, and don't have the
> middle click, try pressing both right and left click at the
> same time.
>
> or, press Shift+Insert to paste the text.
>
> hope this helps
>
> chun
>
> > I will report the results of below commands, as soon
> as I find out how to copy and paste.
> >
> > Shihpin Lin
> >
> >
> >
> > --- On Fri, 5/15/09, Shihpin Lin <[email protected]>
> wrote:
> >
> > > From: Shihpin Lin <[email protected]>
> > > Subject: Re: [pure:dyne] Can't find
> Supercollider
> > > To: "p:d" <[email protected]>
> > > Date: Friday, May 15, 2009, 6:41 PM
> > >
> > >
> > > Hi Rob,
> > >
> > > I am using Live CD. Burned Leek and Potato
> version.
> > >
> > > Regarding the commands you mentioned, since I
> have places
> > > to go today (It's Saturday here in Tokyo),
> > > I will get to it and report to the list
> tomorrow.
> > >
> > > Thanks for your assistance!!
> > >
> > > Shihpin Lin
> > >
> > > --- On Fri, 5/15/09, Rob Canning <[email protected]>
> > > wrote:
> > >
> > > > From: Rob Canning <[email protected]>
> > > > Subject: Re: [pure:dyne] Can't find
> Supercollider
> > > > To: "p:d" <[email protected]>
> > > > Date: Friday, May 15, 2009, 5:48 AM
> > > > open a terminal and run the following
> > > > commands - cut and paste the results back
> > > > into this mail and we can have a closer look
> to see if
> > > you
> > > > have a hardware
> > > > problem
> > > >
> > > > lspci -v | grep audio
> > > > lspci -v | grep snd
> > > >
> > > > lsmod | grep snd
> > > >
> > > >
> > > > also what puredyne are you using full debian
> install,
> > > live
> > > > cd, live usb ?
> > > >
> > > > cheers
> > > >
> > > > rob
> > > >
> > > >
> > > > Shihpin Lin said :
> > > > >
> > > > >
> > > > > Rob,
> > > > >
> > > > > Thanks for the information about
> qjackctl. I
> > > tried it
> > > > since JACK audio server needs to be running
> if you
> > > want to
> > > > run Supercollider.
> > > > >
> > > > > I pressed start button, but it quits
> one second
> > > later
> > > > with this error message:
> > > > >
> > > > > Error -JACK Connection Kit
> > > > >
> > > > > Could not connect to JACK server as
> client.
> > > > >
> > > > > -overall operation failed.
> > > > >
> > > > > -unable to connect to server.
> > > > >
> > > > > Please check the messages window to for
> more info
> > >
> > > > >
> > > > > ----------------------------------
> > > > >
> > > > > Can someone give a hint on how to get
> JACK
> > > server
> > > > going?
> > > > >
> > > > > Thanks so much,
> > > > >
> > > > > Shihpin Lin
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --- On Thu, 5/14/09, Rob Canning <[email protected]>
> > > > wrote:
> > > > >
> > > > > > From: Rob Canning <[email protected]>
> > > > > > Subject: Re: [pure:dyne] Can't
> find
> > > > Supercollider
> > > > > > To: "p:d" <[email protected]>
> > > > > > Date: Thursday, May 14, 2009, 5:08
> PM
> > > > > > Rob Canning said :
> > > > > > > Shihpin Lin said :
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > > > mplayer
> > > > > > /usr/share/sounds/alsa/Noise.wav
> > > > > > > >
> > > > > > > > Thanks Rob, I will try
> it when I
> > > come
> > > > home from
> > > > > > work today.
> > > > > > > >
> > > > > > > > And Antonios,
> > > > > > > >
> > > > > > > > How can I check whether
> JACK
> > > audio
> > > > server is
> > > > > > running?
> > > > > > > > It will be great if you
> or others
> > > can
> > > > show me the
> > > > > > steps to confirm JACK audio
> server.
> > > > > > >
> > > > > > > you need to start it -
> easiest way is
> > > to
> > > > start an
> > > > > > application call qjackctl and
> > > > > > > press the start button...
> > > > > > > if you google this or check
> the
> > > > documentation you will
> > > > > > find there is
> > > > > > > plenty out there :)
> > > > > >
> > > > > > http://code.goto10.org/projects/puredyne/wiki/audio-workshop-jack
> > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > > Shihpin Lin
> > > > > > > >
> > > > > > > >
> > > > > > > > --- On Thu, 5/14/09,
> Antonios
> > > > Galanopoulos <[email protected]>
> > > > > > wrote:
> > > > > > > >
> > > > > > > > > From: Antonios
> Galanopoulos
> > > <[email protected]>
> > > > > > > > > Subject: Re:
> [pure:dyne]
> > > Can't
> > > > find
> > > > > > Supercollider
> > > > > > > > > To: "p:d" <[email protected]>
> > > > > > > > > Date: Thursday, May
> 14,
> > > 2009,
> > > > 10:50 AM
> > > > > > > > > Also make sure that
> JACK
> > > audio
> > > > server
> > > > > > > > > is running. SC3 is
> using it
> > > to
> > > > make
> > > > > > > > > sounds.
> > > > > > > > >
> > > > > > > > > a
> > > > > > > > > Rob Canning said :
> > > > > > > > > > Shihpin Lin
> said :
> > > > > > > > > > >
> > > > > > > > > > > Hi Ahmet,
>
> > > > > > > > > > >
> > > > > > > > > > > Thanks
> for the
> > > details!
> > > > I was able
> > > > > > to switch to
> > > > > > > > > the supercollider
> mode on
> > > gedit.
> > > > > > > > > > >
> > > > > > > > > > > One
> remaining
> > > problem is
> > > > how to
> > > > > > get the sound to
> > > > > > > > > come out.
> > > > > > > > > > >
> > > > > > > > > > > I openned
> a
> > > document and
> > > > typed:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > {SinOsc.ar(440,0,1).dup}.play;
> > > > > > > > > > >
> > > > > > > > > > > I
> highlighted it
> > > and
> > > > chose
> > > > > > "evaluate",
> > > > > > > > > > >
> > > > > > > > > > > but
> nothing
> > > happens. I
> > > > chose
> > > > > > "Start Server" and
> > > > > > > > > evaluated, but
> > > > > > > > > > >
> > > > > > > > > > > nothing
> happens,
> > > not
> > > > even error
> > > > > > message.
> > > > > > > > > > >
> > > > > > > > > > > It's like
> SC is
> > > not
> > > > responding.
> > > > > > > > > > >
> > > > > > > > > > > How can I
> get the
> > > > interpretor to
> > > > > > respond?
> > > > > > > > > > >
> > > > > > > > > > > And how
> can I test
> > > > whether sound
> > > > > > function of
> > > > > > > > > Puredyne is
> working?
> > > > > > > > > >
> > > > > > > > > > try this to
> test if the
> > > sound
> > > > is
> > > > > > working
> > > > > > > > > >
> > > > > > > > > > mplayer
> > > > > > /usr/share/sounds/alsa/Noise.wav
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Thanks a
> lot,
> > > > > > > > > > >
> > > > > > > > > > > Shihpin
> Lin
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --- On
> Thu,
> > > 5/14/09,
> > > > Ahmet Kizilay
> > > > > > <[email protected]>
> > > > > > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > > >
> From: Ahmet
> > > Kizilay
> > > > <[email protected]>
> > > > > > > > > > > >
> Subject: Re:
> > > > [pure:dyne]
> > > > > > Can't find
> > > > > > > > > Supercollider
> > > > > > > > > > > > To:
> "p:d"
> > > <[email protected]>
> > > > > > > > > > > >
> Date:
> > > Thursday, May
> > > > 14, 2009,
> > > > > > 4:47 AM
> > > > > > > > > > > > I am
> sorry for
> > > not
> > > > being
> > > > > > clear.
> > > > > > > > > > > >
> gedit command
> > > will
> > > > open an
> > > > > > editor
> > > > > > > > > application. Find
> > > > > > > > > > > >
> Preferences
> > > under
> > > > Edit menu
> > > > > > (I think). Then
> > > > > > > > > on the plugins
> > > > > > > > > > > > tab
> find sced
> > > and
> > > > click on
> > > > > > it.
> > > > > > > > > > > > then
> go to
> > > tools
> > > > menu and
> > > > > > there you will see
> > > > > > > > > SuperCollider
> > > > > > > > > > > >
> mode.. You can
> > > also
> > > > enable
> > > > > > SuperCollider
> > > > > > > > > highlighting from
> > > > > > > > > > > > one
> of the
> > > menus, I
> > > > dont
> > > > > > remember
> > > > > > > > > > > >
> > > > > > > > > > > > the
> exact
> > > path, but
> > > > it is
> > > > > > very easy to
> > > > > > > > > figure out.
> > > > > > > > > > > >
> ahmet kizilay
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On
> Thu, May
> > > 14,
> > > > 2009 at 2:39
> > > > > > PM,
> > > > > > > > > > > >
> Shihpin Lin
> > > <[email protected]>
> > > > > > > > > > > >
> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Hi
> Ahmet,
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Hi,
> is your
> > > method
> > > > available
> > > > > > somewhere on
> > > > > > > > > the web?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > It's
> a bit
> > > lacking
> > > > in
> > > > > > details. How can I
> > > > > > > > > enable the
> > > > > > > > > > > > sced
> plugin?
> > > What
> > > > do I have
> > > > > > to do to switch
> > > > > > > > > to the
> > > > > > > > > > > >
> supercollider
> > > > mode?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > If
> others
> > > know
> > > > easier way,
> > > > > > please share
> > > > > > > > > it...
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> Shihpin Lin
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > ---
> On Thu,
> > > > 5/14/09, Ahmet
> > > > > > Kizilay <[email protected]>
> > > > > > > > > > > >
> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> From:
> > > Ahmet
> > > > Kizilay
> > > > > > <[email protected]>
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Subject:
> > > Re:
> > > > [pure:dyne]
> > > > > > Can't find
> > > > > > > > > Supercollider
> > > > > > > > > > > >
> > > > > > > > > > > > >
> To:
> > > "p:d"
> > > > <[email protected]>
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Date:
> > > > Thursday, May 14,
> > > > > > 2009, 4:30 AM
> > > > > > > > > > > >
> > > > > > > > > > > > >
> hello,
> > > > > > > > > > > >
> > > > > > > > > > > > >
> (I am a
> > > > beginner too)
> > > > > > > > > > > >
> > > > > > > > > > > > >
> I start
> > > gedit
> > > > on the
> > > > > > command line, then
> > > > > > > > > enable the
> > > > > > > > > > > >
> sced
> > > > > > > > > > > >
> > > > > > > > > > > > >
> plugin
> > > and
> > > > finally
> > > > > > switch to the
> > > > > > > > > supercollider
> > > > > > > > > > > >
> mode...
> > > > > > > > > > > >
> > > > > > > > > > > > >
> ahmet
> > > kizilay
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> On Thu,
> > > May
> > > > 14, 2009 at
> > > > > > 2:25 PM,
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Shihpin
> > > Lin
> > > > <[email protected]>
> > > > > > > > > > > >
> > > > > > > > > > > > >
> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Hello
> > > Puredyne
> > > > users and
> > > > > > developers,
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> I am
> > > typing
> > > > this from
> > > > > > Tokyo, Japan.
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> I am
> > > > relatively new to
> > > > > > Puredyne. I just
> > > > > > > > > burned Leek
> > > > > > > > > > > > and
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Potato
> > > version
> > > > on
> > > > > > CD-ROM.
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> I want
> > > to
> > > > start
> > > > > > Supercollider3, and I
> > > > > > > > > right-clicked
> > > > > > > > > > > > and
> > > > > > > > > > > >
> > > > > > > > > > > > >
> looked
> > > for SC3
> > > > under
> > > > > > multimedia but I
> > > > > > > > > could not find
> > > > > > > > > > > > it.
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> How are
> > > others
> > > > launching
> > > > > > SC?
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Your
> > > help
> > > > appreciated,
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> Shihpin
> > > Lin
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> ---
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> [email protected]
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > irc.goto10.org
> > > > > > #pure:dyne
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > -----Inline
> > > > Attachment
> > > > > > Follows-----
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> ---
> > > > > > > > > > > >
> > > > > > > > > > > > >
> [email protected]
> > > > > > > > > > > >
> > > > > > > > > > > >
> >
> > > > irc.goto10.org
> > > > > > #pure:dyne
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > ---
> > > > > > > > > > > >
> > > > > > > > > > > > [email protected]
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > irc.goto10.org
> > > > #pure:dyne
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> -----Inline
> > > > Attachment
> > > > > > Follows-----
> > > > > > > > > > > >
> > > > > > > > > > > > ---
> > > > > > > > > > > > [email protected]
> > > > > > > > > > > >
> > > irc.goto10.org
> > > > #pure:dyne
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
>
> > > > > > > > > > >
> > > > > > > > > > > ---
> > > > > > > > > > > [email protected]
> > > > > > > > > > >
> irc.goto10.org
> > > > #pure:dyne
> > > > > > > > > > >
> > > > > > > > > >
> --------------
> > > > > > > > > > [email protected]
> > > > > > > > > >
> rob.goto10.org
> > > > > > > > > >
> --------------
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > ---
> > > > > > > > > > [email protected]
> > > > > > > > > >
> irc.goto10.org
> > > #pure:dyne
> > > > > > > > > |
> > > > > > > > > |'`'.
> > > > > > > > > .''.
>
> > > > > > > > > ..
> > > > > > > > > | '
>
> > > > > > > > > .' '.
> .`
> > > '.
> > > > > > > > >
> |-----`.----.'-------
> > > > '------------.
> > > > > > > > > | '..'
>
> > > > > > > > > `. '
> > > > > > > > > |
>
> > > > > > > > >
> `..'
> > > > > > > > > |
> > > > > > > > >
> > > > > > > > > ---
> > > > > > > > > [email protected]
> > > > > > > > > irc.goto10.org
> #pure:dyne
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > ---
> > > > > > > > [email protected]
> > > > > > > > irc.goto10.org
> #pure:dyne
> > > > > > > >
> > > > > > > --------------
> > > > > > > [email protected]
> > > > > > > rob.goto10.org
> > > > > > > --------------
> > > > > >
> > > > > >
> > > > > >
> > > > > > > ---
> > > > > > > [email protected]
> > > > > > > irc.goto10.org #pure:dyne
> > > > > > --------------
> > > > > > [email protected]
> > > > > > rob.goto10.org
> > > > > > --------------
> > > > > >
> > > > > > -----Inline Attachment
> Follows-----
> > > > > >
> > > > > > ---
> > > > > > [email protected]
> > > > > > irc.goto10.org #pure:dyne
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ---
> > > > > [email protected]
> > > > > irc.goto10.org #pure:dyne
> > > > >
> > > > --------------
> > > > [email protected]
> > > > rob.goto10.org
> > > > --------------
> > > >
> > > > -----Inline Attachment Follows-----
> > > >
> > > > ---
> > > > [email protected]
> > > > irc.goto10.org #pure:dyne
> > >
> > >
> > >
> > >
> > > ---
> > > [email protected]
> > > irc.goto10.org #pure:dyne
> > >
> >
> >
> >
> >
> > ---
> > [email protected]
> > irc.goto10.org #pure:dyne
> >
>
> ---
> [email protected]
> irc.goto10.org #pure:dyne
---
[email protected]
irc.goto10.org #pure:dyne
