Ahoi,
you have to installthe drivers:
https://pve.proxmox.com/wiki/Windows_VirtIO_Drivers
Stefan
Am 29.03.21 um 15:37 schrieb Leandro Roggerone:
Hi guys , thanks for your words , have some feedback:
Maybe Proxmox cannot look inside the VM for the actual memory usage because
the VirtIO balloon driver is not installed or active? Or maybe the other
90% is in use as Windows file cache?
I think so ...
Dont know about windows file cache ...
Have you installed the VirtIO drivers for Windows? Are you assigning too
many vCPUs or memory? Can you share the VM configuration file? Can you tell
us something about your Proxmox hardware and version?
No , I have not ... now you mentioned im reading about VirtIO , I will try
to install and let you know how it goes
Should install it no my pve box or directly inside windows vm ?
I'm assigning max vCPUs abailables (24 , 4 sockets 6 cores) and 32gb for
memory.
(I really don't know about any criteria to assign vcpus)
This is VM config file:
root@pve:~# cat /etc/pve/nodes/pve/qemu-server/107.conf
bootdisk: ide0
cores: 6
ide0: local-lvm:vm-107-disk-0,size=150G
ide1: local-lvm:vm-107-disk-1,size=350G
ide2:
local:iso/Windows_Server_2016_Datacenter_EVAL_en-us_14393_refresh.ISO,media=cdrom,size=6808810K
memory: 32768
name: KAIKENII
net0: e1000=1A:F1:10:BF:92:0A,bridge=vmbr3,firewall=1
numa: 0
ostype: win10
scsihw: virtio-scsi-pci
smbios1: uuid=daf8f767-59c7-4e87-b3be-75d4a8020c38
sockets: 4
vmgenid: a7634624-1230-4a3e-9e7c-255d32ad2030
My PVE is:
CPU(s) 24 x Intel(R) Xeon(R) CPU X5680 @ 3.33GHz (2 Sockets)
Kernel Version Linux 5.0.15-1-pve #1 SMP PVE 5.0.15-1 (Wed, 03 Jul 2019
10:51:57 +0200)
PVE Manager Version pve-manager/6.0-4/2a719255
Total Mem = 64GB.
That's all.
Thanks
El vie, 26 mar 2021 a las 11:40, Arjen via pve-user (<
pve-user@lists.proxmox.com>) escribió:
---------- Forwarded message ----------
From: Arjen <leeste...@protonmail.ch>
To: Proxmox VE user list <pve-user@lists.proxmox.com>
Cc:
Bcc:
Date: Fri, 26 Mar 2021 14:39:13 +0000
Subject: Re: [PVE-User] Windows sever 2016 vm with very high ram usage
On Friday, March 26th, 2021 at 15:28, Leandro Roggerone <
lean...@tecnetmza.com.ar> wrote:
Hi guys , Just wanted to share this with you.
After creating a VM for a windows sever 2016 with 32 GB ram I can
see continuos high memory usage (about 99-100%).
I have no running task , since it is a fresh server and from task manager
can see a 10% of memory usage.
Regarding those confusing differences, server performance is very bad.
Maybe Proxmox cannot look inside the VM for the actual memory usage
because the VirtIO balloon driver is not installed or active? Or maybe the
other 90% is in use as Windows file cache?
User experience is very poor with a non fluent user interface.
Is there something to do / check to improve this ?
Have you installed the VirtIO drivers for Windows? Are you assigning too
many vCPUs or memory? Can you share the VM configuration file? Can you tell
us something about your Proxmox hardware and version?
Any advice would be welcome.
Maybe search the forum for similar Windows performance questions?
https://forum.proxmox.com/forums/proxmox-ve-installation-and-configuration.16/
Thanks.
best of luck, Arjen
---------- Forwarded message ----------
From: Arjen via pve-user <pve-user@lists.proxmox.com>
To: Proxmox VE user list <pve-user@lists.proxmox.com>
Cc: Arjen <leeste...@protonmail.ch>
Bcc:
Date: Fri, 26 Mar 2021 14:39:13 +0000
Subject: Re: [PVE-User] Windows sever 2016 vm with very high ram usage
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
