Hello,
I have PVE cluster and I thinking to install on the pve-7 openvswitch
for can move and add VM from other networks and Proxmox Cluster
With base Linux bridge all work well without problem with 2 interface
10GB ens1f0np0 ens1f12np0
I install openvswitch with manual
https://pve.proxmox.com/wiki/Open_vSwitch
I want use Fiber 10GB interfaces ens1f0np0 ens1f12np0 with Bond I think.
I try some settings but is not working.
My setup in interfaces:
auto lo
iface lo inet loopback
auto ens1f12np0
iface ens1f12np0 inet manual
#Fiber
iface idrac inet manual
iface eno2 inet manual
iface eno3 inet manual
iface eno4 inet manual
auto ens1f0np0
iface ens1f0np0 inet manual
iface eno1 inet manual
auto inband
iface inband inet static
address 10.10.29.10/24
gateway 10.10.29.250
ovs_type OVSIntPort
ovs_bridge vmbr0
#Proxmox Web Access
auto vlan10
iface vlan10 inet manual
ovs_type OVSIntPort
ovs_bridge vmbr0
ovs_options tag=10
#Network 10
auto bond0
iface bond0 inet manual
ovs_bonds ens1f0np0 ens1f12np0
ovs_type OVSBond
ovs_bridge vmbr0
ovs_mtu 9000
ovs_options bond_mode=active-backup
auto vmbr0
iface vmbr0 inet manual
ovs_type OVSBridge
ovs_ports bond0 inband vlan10
ovs_mtu 9000
#inband
Can some one help me if I set all correctly or not?
If someone have setup openvswitch with Bond interfaces 10GB share with
me configuration.
Thank at lot.
Sergey TS
The best Regard
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
