--- Begin Message ---
Hi,
El 9/1/23 a las 12:47, Piviul escribió:
On 1/9/23 10:54, Eneko Lacunza via pve-user wrote:
Hi,
You need to route traffic between LAN network and Ceph network, so
that this works. When you have all monitors using ceph network IPs,
undo the routing.
the routing table on a CEPH/PVE node is:
$ ip route
default via 192.168.64.1 dev vmbr0 proto kernel onlink
192.168.64.0/20 dev vmbr0 proto kernel scope link src 192.168.70.30
192.168.254.0/24 dev vmbr2 proto kernel scope link src 192.168.254.1
192.168.255.0/24 dev vmbr1 proto kernel scope link src 192.168.255.1
vmbr2 is the CEPH network, vmbr1 is the PVE network and vmbr0 is the
LAN network. So you suggest me to add first the 3 ceph monitors using
the CEPH IPs network and then destroy the 3 monitors having LAN IPs?
Similarly for the ceph managers?
If all Ceph services/clients are on those Proxmox nodes, yes, that
should work.
Also check that there are no old monitor IPs on ceph config when you're
done (/etc/pve/ceph.conf)
Cheers
Eneko Lacunza
Zuzendari teknikoa | Director técnico
Binovo IT Human Project
Tel. +34 943 569 206 |https://www.binovo.es
Astigarragako Bidea, 2 - 2º izda. Oficina 10-11, 20180 Oiartzun
https://www.youtube.com/user/CANALBINOVO
https://www.linkedin.com/company/37269706/
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
