>>3x DELL R620 Servers, with full iDRAC >>running current pve from the enterprise repository
Do you have openmanage installed ? if yes, please read : https://pve.proxmox.com/wiki/High_Availability_Cluster_4.x I have wrote some notes , because by default openmanage change watchdog timeout and action. ----- Mail original ----- De: "Albert Dengg" <[email protected]> À: "proxmoxve" <[email protected]> Envoyé: Vendredi 11 Décembre 2015 19:59:34 Objet: Re: [PVE-User] Proxmox VE 4.1 released! hi, On Fri, Dec 11, 2015 at 12:24:16PM +0100, Martin Maurer wrote: > Hi all, > > we are proud to announce the final release of our Proxmox VE 4.1! :) i have a slight problem however and i'm wondering if anybody else has this problem: while i had fencing working fine using the iTCO watchdog in 4.0, in 4.1 i cannot get pve to fence a node. my setup is the following: 3x DELL R620 Servers, with full iDRAC running current pve from the enterprise repository when i try to force a node to fence itself by setting all links to down using this simple command for i in $(seq 0 5); do ip l s eth$i down; done to set all links to down, the node will not reboot itself even though pvecm status correctly displays that quorum has been lost i have tried: iTCO_wdt ipmi_watchdog both with and without nmi_watchdog=0 the only differnece is that if i use ipmi_watchdog, i get a message in the kernel ring buffer every 5 secondds like that: Dec 11 18:59:29 pve2 kernel: [ 361.067004] ipmi_si ipmi_si.0: Could not set the global enables: 0xcc. fencing was working before (in fact it seems all nodes where fencing themselves on the upgrade from 4.0 to 4.1...) does somebody have an idea whats going wrong here or to be more exact, where to search next? thx regards, albert _______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
