I am the only one who is facing this problem on iDRAC 8 BMC??
On 29 Mar 2016, at 20:40, Patrick Kaiser <[email protected]> wrote: > Hi all, > > i’ve also running a 3 node DELL server cluster like Albert. > > I have a ha enabled vm running on pve server 1. > > i receive also the following error in kernel ring buffer: > kernel: [ 2838.041628] ipmi_si ipmi_si.0: Could not set the global enables: > 0xcc. > > > ever 2 seconds …. :/ > > > i completely followed > https://pve.proxmox.com/wiki/High_Availability_Cluster_4.x > but it does not seem to work for me. > > any idea where to go next? > > > additonal info: > > i am running 2 dell servers with iDRAC 8 enterprise and 1 dell server with > iDRAC 6 enterprise. > > iDRAC6 server does not prints this error, iDRAC8 servers do :/ > > so i am not the only one: > https://forum.proxmox.com/threads/kernel-ipmi_si-ipmi_si-0-could-not-set-the-global-enables-0xcc.24920/ > known bug? https://sourceforge.net/p/openipmi/mailman/message/34383470/ > > > > > > On 12 Dec 2015, at 07:43, Alexandre DERUMIER <[email protected]> wrote: > >>>> 3x DELL R620 Servers, with full iDRAC >>>> running current pve from the enterprise repository >> >> Do you have openmanage installed ? >> if yes, please read : >> https://pve.proxmox.com/wiki/High_Availability_Cluster_4.x >> >> I have wrote some notes , because by default openmanage change watchdog >> timeout and action. >> >> ----- Mail original ----- >> De: "Albert Dengg" <[email protected]> >> À: "proxmoxve" <[email protected]> >> Envoyé: Vendredi 11 Décembre 2015 19:59:34 >> Objet: Re: [PVE-User] Proxmox VE 4.1 released! >> >> hi, >> On Fri, Dec 11, 2015 at 12:24:16PM +0100, Martin Maurer wrote: >>> Hi all, >>> >>> we are proud to announce the final release of our Proxmox VE 4.1! >> :) >> >> i have a slight problem however and i'm wondering if anybody else >> has this problem: >> while i had fencing working fine using the iTCO watchdog in 4.0, in >> 4.1 i cannot get pve to fence a node. >> >> my setup is the following: >> >> 3x DELL R620 Servers, with full iDRAC >> running current pve from the enterprise repository >> >> >> when i try to force a node to fence itself by setting all links to >> down using this simple command >> for i in $(seq 0 5); do ip l s eth$i down; done >> to set all links to down, the node will not reboot itself even >> though pvecm status correctly displays that quorum has been lost >> >> i have tried: >> iTCO_wdt >> ipmi_watchdog >> both with and without nmi_watchdog=0 >> >> the only differnece is that if i use ipmi_watchdog, i get a message >> in the kernel ring buffer every 5 secondds like that: >> Dec 11 18:59:29 pve2 kernel: [ 361.067004] ipmi_si ipmi_si.0: Could not set >> the global enables: 0xcc. >> >> fencing was working before (in fact it seems all nodes where fencing >> themselves on the upgrade from 4.0 to 4.1...) >> >> does somebody have an idea whats going wrong here or to be more >> exact, where to search next? >> >> thx >> >> regards, >> albert >> >> _______________________________________________ >> pve-user mailing list >> [email protected] >> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> _______________________________________________ >> pve-user mailing list >> [email protected] >> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > _______________________________________________ > pve-user mailing list > [email protected] > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
