Hello Lindsay,
> In short I need two ip addresses (one private, one public) and I'd like
> to bond all three ethernet ports.
Why would someone do this? Normaly you want to separate your WAN and LAN
interfaces.
If you really wanna do something like that, do it with an up-command.
auto bond0
iface bond0 inet static
address 10.10.10.243
netmask 255.255.255.0
slaves eth0 eth1 eth2
bond_miimon 100
bond_mode balance-rr
mtu 9000
up ip address add 192.168.5.243/24 dev bond0
down ip address delete 192.168.5.243/24 dev bond0
> And could it be used in place of a bridge?
This still isn't a bridge. If you want a bridge you have to create it
and assign bond0 to it.
But my advice is not to bond the public and private interfaces!
Best regards
Bastian
--
Bastian Sebode
Fachinformatiker Systemintegration
LINET Services GmbH | Cyriaksring 10a | 38118 Braunschweig Tel.
0531-180508-0 | Fax 0531-180508-29 | http://www.linet-services.de
LINET in den sozialen Netzwerken:
www.twitter.com/linetservices | www.facebook.com/linetservices
Wissenswertes aus der IT-Welt: www.linet-services.de/blog/
Geschäftsführung: Timo Springmann und Mirko Savic HR B 9170 Amtsgericht
Braunschweig
USt-IdNr. DE 259 526 516
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
