The delay you mention isn't proxmox, it's gluster's timeout. You can adjust it with "gluster volume set <name> network.ping-timeout 30", but I'd advise against going under 30 seconds (I believe the default is 45 seconds).
On Tue, Aug 15, 2017 at 06:42:16PM -0300, Gilberto Nunes wrote: > wow!!! it's took some time... but it work! > > I have 4 servers: > - storage100 > - storage200 > - storage300 > - storage400 > > I put storage 100 as main server, and storage400 as the backup. > I turn off the servers: > - storage100 > - storage300 > - storage400 > > The Proxmox took some time, but it's work.... > > Great job Proxmox Team!!! > > Thanks a lot > > > > > 2017-08-15 18:33 GMT-03:00 <[email protected]>: > > > Yep ! > > Just put storage100 and storage200 as a backup, that way if storage100 > > dies and you reboot a proxmox node, it'll connect to storage200 and > > it'll still work. > > Basically that's just the address where it'll fetch the volume config, > > but after the initial connection it'll talk to all the bricks on it's > > own. > > > > Works exactly like the fuse mount by hand. > > > > On Tue, Aug 15, 2017 at 06:26:59PM -0300, Gilberto Nunes wrote: > > > I see... > > > > > > So if I put just you of the brick, let's say, storage100, but I have 4 > > > bricks, and turn off the storage100, storage200 and storage300, I will > > > still have a valid set up??? > > > > > > > > > > > > > > > 2017-08-15 18:24 GMT-03:00 <[email protected]>: > > > > > > > Hi, > > > > > > > > You just tell it about one brick, that's enough. > > > > The second input box is there as a backup, in case the first one > > > > is down for some reason. > > > > > > > > When proxmox connects to gluster, it'll get your whole setup and > > > > it will know about the bricks then, no worries. > > > > > > > > > > > > If your proxmox nodes are the same as your gluster nodes (same > > > > physical machines) I'd just use "localhost" as the server when > > > > adding to proxmox. > > > > That's what I've been doing and it works perfectly :) > > > > > > > > On Tue, Aug 15, 2017 at 06:13:04PM -0300, Gilberto Nunes wrote: > > > > > Hi... > > > > > > > > > > I have here a cluster of GlusterFS, with 4 server, working as replica > > > > > distribuited... > > > > > But how can I add the Gluster into Proxmox, since accept just two > > gluster > > > > > server? > > > > > I wanna use all my gluster servers into Proxmox?? > > > > > > > > > > How can I achieve this set up??? > > > > > > > > > > Thanks a lot > > > > > _______________________________________________ > > > > > pve-user mailing list > > > > > [email protected] > > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > _______________________________________________ > > > > pve-user mailing list > > > > [email protected] > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > > > > _______________________________________________ > > > pve-user mailing list > > > [email protected] > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > _______________________________________________ > > pve-user mailing list > > [email protected] > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > _______________________________________________ > pve-user mailing list > [email protected] > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
signature.asc
Description: Digital signature
_______________________________________________ pve-user mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
