gluster vol info Volume Name: vol-glusterfs Type: Distributed-Replicate Volume ID: 3e501d59-46c2-4db0-8ef7-7fe929ba4816 Status: Started Number of Bricks: 2 x 2 = 4 Transport-type: tcp Bricks: Brick1: storage100:/storage/data Brick2: storage200:/storage/data Brick3: storage300:/storage/data Brick4: storage400:/storage/data Options Reconfigured: network.ping-timeout: 45 performance.readdir-ahead: on
2017-08-15 19:13 GMT-03:00 <[email protected]>: > By the way, don't know if you know, but do check you have those > settings configured on the volume : > > performance.readdir-ahead: on > cluster.quorum-type: auto > cluster.server-quorum-type: server > network.remote-dio: enable > cluster.eager-lock: enable > performance.quick-read: off > performance.read-ahead: off > performance.io-cache: off > performance.stat-prefetch: off > > Failing that you could get corrupted VM disks, I've heard. > On debian at least, I think on redhat based systems there is a virt > group setting all of that but I have no experience with those distros. > > On Tue, Aug 15, 2017 at 06:59:39PM -0300, Gilberto Nunes wrote: > > yep > > > > thanks for advise > > > > > > > > > > 2017-08-15 18:58 GMT-03:00 <[email protected]>: > > > > > The delay you mention isn't proxmox, it's gluster's timeout. You can > > > adjust it with "gluster volume set <name> network.ping-timeout 30", > > > but I'd advise against going under 30 seconds (I believe the default > > > is 45 seconds). > > > > > > On Tue, Aug 15, 2017 at 06:42:16PM -0300, Gilberto Nunes wrote: > > > > wow!!! it's took some time... but it work! > > > > > > > > I have 4 servers: > > > > - storage100 > > > > - storage200 > > > > - storage300 > > > > - storage400 > > > > > > > > I put storage 100 as main server, and storage400 as the backup. > > > > I turn off the servers: > > > > - storage100 > > > > - storage300 > > > > - storage400 > > > > > > > > The Proxmox took some time, but it's work.... > > > > > > > > Great job Proxmox Team!!! > > > > > > > > Thanks a lot > > > > > > > > > > > > > > > > > > > > 2017-08-15 18:33 GMT-03:00 <[email protected]>: > > > > > > > > > Yep ! > > > > > Just put storage100 and storage200 as a backup, that way if > storage100 > > > > > dies and you reboot a proxmox node, it'll connect to storage200 and > > > > > it'll still work. > > > > > Basically that's just the address where it'll fetch the volume > config, > > > > > but after the initial connection it'll talk to all the bricks on > it's > > > > > own. > > > > > > > > > > Works exactly like the fuse mount by hand. > > > > > > > > > > On Tue, Aug 15, 2017 at 06:26:59PM -0300, Gilberto Nunes wrote: > > > > > > I see... > > > > > > > > > > > > So if I put just you of the brick, let's say, storage100, but I > have > > > 4 > > > > > > bricks, and turn off the storage100, storage200 and storage300, I > > > will > > > > > > still have a valid set up??? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2017-08-15 18:24 GMT-03:00 <[email protected]>: > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > You just tell it about one brick, that's enough. > > > > > > > The second input box is there as a backup, in case the first > one > > > > > > > is down for some reason. > > > > > > > > > > > > > > When proxmox connects to gluster, it'll get your whole setup > and > > > > > > > it will know about the bricks then, no worries. > > > > > > > > > > > > > > > > > > > > > If your proxmox nodes are the same as your gluster nodes (same > > > > > > > physical machines) I'd just use "localhost" as the server when > > > > > > > adding to proxmox. > > > > > > > That's what I've been doing and it works perfectly :) > > > > > > > > > > > > > > On Tue, Aug 15, 2017 at 06:13:04PM -0300, Gilberto Nunes wrote: > > > > > > > > Hi... > > > > > > > > > > > > > > > > I have here a cluster of GlusterFS, with 4 server, working as > > > replica > > > > > > > > distribuited... > > > > > > > > But how can I add the Gluster into Proxmox, since accept > just two > > > > > gluster > > > > > > > > server? > > > > > > > > I wanna use all my gluster servers into Proxmox?? > > > > > > > > > > > > > > > > How can I achieve this set up??? > > > > > > > > > > > > > > > > Thanks a lot > > > > > > > > _______________________________________________ > > > > > > > > pve-user mailing list > > > > > > > > [email protected] > > > > > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > > > > > > > _______________________________________________ > > > > > > > pve-user mailing list > > > > > > > [email protected] > > > > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > pve-user mailing list > > > > > > [email protected] > > > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > > > _______________________________________________ > > > > > pve-user mailing list > > > > > [email protected] > > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > > > > > > > _______________________________________________ > > > > pve-user mailing list > > > > [email protected] > > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > _______________________________________________ > > > pve-user mailing list > > > [email protected] > > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > > > > > _______________________________________________ > > pve-user mailing list > > [email protected] > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > _______________________________________________ > pve-user mailing list > [email protected] > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > _______________________________________________ pve-user mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
