Hello, Thanks for the update.
Please find the below requested details. 1. I created the ZFS pool with 2 mirrored using HDD disk by mistake (Actually I suppose to create a ZFS pool using the SSD disk) 2. Noticed that I accidentally used two HDDs instead of using two SSDs thatare also in the system. 3. Tried to create a new pool with the SSDs, but couldn't (for some reason) , Because I can't see a free disk to create it. 4. Destroyed ZFS HDD pool with the destroy command, but still can'tcreate the SSD pool. 5. I can't see any free disk to create it while creating the ZFS pool. Mit freundlichen Grüßen / Best regards / Cordialement, Sivakumar SARAVANAN Externer Dienstleister für / External service provider for Valeo Siemens eAutomotive Germany GmbH Research & Development R & D SWENG TE 1 INFTE Frauenauracher Straße 85 91056 Erlangen, Germany Tel.: +49 9131 9892 0000 Mobile: +49 176 7698 5441 sivakumar.saravanan.jv....@valeo-siemens.com valeo-siemens.com Valeo Siemens eAutomotive Germany GmbH: Managing Directors: Holger Schwab, Michael Axmann; Chairman of the Supervisory Board: Hartmut Klötzer; Registered office: Erlangen, Germany; Commercial registry: Fürth, HRB 15655 On Tue, May 26, 2020 at 7:13 PM harrim4n <harri...@harrim4n.com> wrote: > Hi, > > I'm not sure if I'm understanding you correctly, so I'll summarize what > I got that you did: > 1. Created a ZFS pool with one mirror vdev > 2. Noticed that you accidentally used two HDDs instead of two SSDs that > are also in the system > 3. Tried to create a new pool with the SSDs, but couldn't (for some reason) > 4. Destroyed ZFS HDD pool with the destroy command, but still can't > create the SSD pool > > Is this correct or am I misunderstanding something? > > What happens if you try to create the ZFS pool for the SSDs manually > from the commandline? I.e.: > zpool create ssdpool mirror ssd_dev1 ssd_dev2 > > Regards, > harrim4n > > > On 25.05.20 16:13, Sivakumar SARAVANAN wrote: > > Hello, > > > > I need to add 2 additional mirrored disk as below > > > > 1. SSB ZFS with 855 GB (2 disk) > > 2. HDD ZFS with 2 TB ( 2 disk) > > > > As I created as above already. But I wanted to remove all the mirrored > disk > > that I created already. > > > > I used this command - zpool destroy HDD-Storage-PRX003 > > > > I want to create a new mirrored disk now. But I can see any free disk now > > to create a new ZFS mirrored disk. > > > > Kindly suggest. > > > > > > > > Mit freundlichen Grüßen / Best regards / Cordialement, > > > > Sivakumar SARAVANAN > > > > Externer Dienstleister für / External service provider for > > Valeo Siemens eAutomotive Germany GmbH > > Research & Development > > R & D SWENG TE 1 INFTE > > Frauenauracher Straße 85 > > 91056 Erlangen, Germany > > Tel.: +49 9131 9892 0000 > > Mobile: +49 176 7698 5441 > > sivakumar.saravanan.jv....@valeo-siemens.com > > valeo-siemens.com > > > > Valeo Siemens eAutomotive Germany GmbH: Managing Directors: Holger > > Schwab, Michael > > Axmann; Chairman of the Supervisory Board: Hartmut Klötzer; Registered > > office: Erlangen, Germany; Commercial registry: Fürth, HRB 15655 > > > > > > On Mon, May 25, 2020 at 3:49 PM Lindsay Mathieson < > > lindsay.mathie...@gmail.com> wrote: > > > >> On 25/05/2020 10:43 pm, Sivakumar SARAVANAN wrote: > >>> So I ran the below comment > >>> > >>> zpool destroy HDD-Storage-PRX003 > >>> > >>> But I am not getting a free pool to create SSD mirrored disk again > after > >>> running the above command. > >> I believe you need to remove the partitioning on the disks which zfs > >> created first, there's usually two partitions on the disk. > >> > >> -- > >> Lindsay > >> > >> _______________________________________________ > >> pve-user mailing list > >> pve-user@pve.proxmox.com > >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > >> > > _______________________________________________ > pve-user mailing list > pve-user@pve.proxmox.com > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > -- *This e-mail message is intended for the internal use of the intended recipient(s) only. The information contained herein is confidential/privileged. Its disclosure or reproduction is strictly prohibited. If you are not the intended recipient, please inform the sender immediately, do not disclose it internally or to third parties and destroy it. In the course of our business relationship and for business purposes only, Valeo may need to process some of your personal data. For more information, please refer to the Valeo Data Protection Statement and Privacy notice available on Valeo.com <https://www.valeo.com/en/ethics-and-compliance/#principes>* _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
