Hi, how are you trying to create the pool? Are you using the WebUI under the Node view > Disks > ZFS? Can you try to create the pool from the commandline?
Regards, harrim4n On May 27, 2020 8:55:10 AM GMT+02:00, Sivakumar SARAVANAN <sivakumar.saravanan.jv....@valeo-siemens.com> wrote: >Hello, > >Thanks for the update. > >Please find the below requested details. > >1. I created the ZFS pool with 2 mirrored using HDD disk by mistake >(Actually I suppose to create a ZFS pool using the SSD disk) >2. Noticed that I accidentally used two HDDs instead of using two SSDs >thatare also in the system. >3. Tried to create a new pool with the SSDs, but couldn't (for some >reason) , Because I can't see a free disk to create it. >4. Destroyed ZFS HDD pool with the destroy command, but still >can'tcreate >the SSD pool. >5. I can't see any free disk to create it while creating the ZFS pool. > >Mit freundlichen Grüßen / Best regards / Cordialement, > >Sivakumar SARAVANAN > >Externer Dienstleister für / External service provider for >Valeo Siemens eAutomotive Germany GmbH >Research & Development >R & D SWENG TE 1 INFTE >Frauenauracher Straße 85 >91056 Erlangen, Germany >Tel.: +49 9131 9892 0000 >Mobile: +49 176 7698 5441 >sivakumar.saravanan.jv....@valeo-siemens.com >valeo-siemens.com > >Valeo Siemens eAutomotive Germany GmbH: Managing Directors: Holger >Schwab, Michael >Axmann; Chairman of the Supervisory Board: Hartmut Klötzer; Registered >office: Erlangen, Germany; Commercial registry: Fürth, HRB 15655 > > >On Tue, May 26, 2020 at 7:13 PM harrim4n <harri...@harrim4n.com> wrote: > >> Hi, >> >> I'm not sure if I'm understanding you correctly, so I'll summarize >what >> I got that you did: >> 1. Created a ZFS pool with one mirror vdev >> 2. Noticed that you accidentally used two HDDs instead of two SSDs >that >> are also in the system >> 3. Tried to create a new pool with the SSDs, but couldn't (for some >reason) >> 4. Destroyed ZFS HDD pool with the destroy command, but still can't >> create the SSD pool >> >> Is this correct or am I misunderstanding something? >> >> What happens if you try to create the ZFS pool for the SSDs manually >> from the commandline? I.e.: >> zpool create ssdpool mirror ssd_dev1 ssd_dev2 >> >> Regards, >> harrim4n >> >> >> On 25.05.20 16:13, Sivakumar SARAVANAN wrote: >> > Hello, >> > >> > I need to add 2 additional mirrored disk as below >> > >> > 1. SSB ZFS with 855 GB (2 disk) >> > 2. HDD ZFS with 2 TB ( 2 disk) >> > >> > As I created as above already. But I wanted to remove all the >mirrored >> disk >> > that I created already. >> > >> > I used this command - zpool destroy HDD-Storage-PRX003 >> > >> > I want to create a new mirrored disk now. But I can see any free >disk now >> > to create a new ZFS mirrored disk. >> > >> > Kindly suggest. >> > >> > >> > >> > Mit freundlichen Grüßen / Best regards / Cordialement, >> > >> > Sivakumar SARAVANAN >> > >> > Externer Dienstleister für / External service provider for >> > Valeo Siemens eAutomotive Germany GmbH >> > Research & Development >> > R & D SWENG TE 1 INFTE >> > Frauenauracher Straße 85 >> > 91056 Erlangen, Germany >> > Tel.: +49 9131 9892 0000 >> > Mobile: +49 176 7698 5441 >> > sivakumar.saravanan.jv....@valeo-siemens.com >> > valeo-siemens.com >> > >> > Valeo Siemens eAutomotive Germany GmbH: Managing Directors: Holger >> > Schwab, Michael >> > Axmann; Chairman of the Supervisory Board: Hartmut Klötzer; >Registered >> > office: Erlangen, Germany; Commercial registry: Fürth, HRB 15655 >> > >> > >> > On Mon, May 25, 2020 at 3:49 PM Lindsay Mathieson < >> > lindsay.mathie...@gmail.com> wrote: >> > >> >> On 25/05/2020 10:43 pm, Sivakumar SARAVANAN wrote: >> >>> So I ran the below comment >> >>> >> >>> zpool destroy HDD-Storage-PRX003 >> >>> >> >>> But I am not getting a free pool to create SSD mirrored disk >again >> after >> >>> running the above command. >> >> I believe you need to remove the partitioning on the disks which >zfs >> >> created first, there's usually two partitions on the disk. >> >> >> >> -- >> >> Lindsay >> >> >> >> _______________________________________________ >> >> pve-user mailing list >> >> pve-user@pve.proxmox.com >> >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> >> >> >> _______________________________________________ >> pve-user mailing list >> pve-user@pve.proxmox.com >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> > >-- >*This e-mail message is intended for the internal use of the intended >recipient(s) only. >The information contained herein is >confidential/privileged. Its disclosure or reproduction is strictly >prohibited. >If you are not the intended recipient, please inform the sender >immediately, do not disclose it internally or to third parties and >destroy >it. > >In the course of our business relationship and for business purposes >only, Valeo may need to process some of your personal data. >For more >information, please refer to the Valeo Data Protection Statement and >Privacy notice available on Valeo.com ><https://www.valeo.com/en/ethics-and-compliance/#principes>* >_______________________________________________ >pve-user mailing list >pve-user@pve.proxmox.com >https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
