On Jul 31, 2012, at 8:44 PM, Becky Ligon wrote: > Henk/John: > > I can't find a binary gcc for MAC OSX anywhere. Does it exist? It's part of Apple's Xcode which is free for download and among others has gcc make etc. gettext and pkg-config has to be downloaded from 'the normal/linux' sources and builds with make from Xcode.
Henk > > Becky > > On Tue, Jul 31, 2012 at 1:34 PM, Henk D. Schoneveld <[email protected]> > wrote: > Hi Becky, > > As replacement for macfuse I've used fuse4x at http://fuse4x.github.com, as > advised by John Chandy. > I downloaded and installed Xcode, gettext and pkg-config. Fuse4X installs in > usr/local/lib, I had to make symlinks to /usr/lib because otherwise fuse.pc > isn't found. > Downloaded the 2.8.6 tarball > ./configure --prefix=/usr --disable-usrint --enable-fuse > make > > NOW MY BLUNDER, SHAME SHAME on ME > ---------------------------- > copied pvfs2fuse to /usr/bin > > complained it didn't work Ough Ough > ---------------------------- > Did "sudo make install" AND EVERYTHING WORKS AS EXPECTED > > My excuses for all the fuzz. > > Henk Schoneveld > > PS. did CC the list ;-) > > On Jul 31, 2012, at 3:26 PM, Becky Ligon wrote: > > > Henk: > > > > Can you send me your pvfs2tab file, your PVFS conf file, and the version of > > fuse that you are using? My understanding is that OSX fuse is no longer > > supported, so there is a 3rd party "fuse" that you have to use. I will > > find out the details for you. > > > > Becky > > > > On Tue, Jul 31, 2012 at 4:15 AM, Henk D. Schoneveld <[email protected]> > > wrote: > > > > On Jul 30, 2012, at 11:17 PM, Becky Ligon wrote: > > > > > Henk: > > > > > > Can you post your output to this list? > > Of course happy to do that. > > > > [E 19:01:35.647450] PVFS_isys_fs_add: Failed to initialize any appropriate > > BMI methods for addresses: > > [E 19:01:35.648604] ??? > > [E 19:01:35.648645] PVFS_isys_fs_add call: Protocol not available > > [E 19:01:35.648680] ERROR: could not initialize any file systems in > > /etc/pvfs2tab. > > PVFS_util_init_defaults: Operation not supported by device (error class: 0) > > > > pvfs2fuse and exactly the same pvfs2tab under linux works as expected. > > > > Any more hints ? > > > > By the way I patched state-machine-fns.c with > > > > @@ -229,7 +229,9 @@ > > { > > gossip_err("SM current state or trtbl is invalid " > > "(smcb = %p)\n", smcb); > > +#ifdef GOSSIP_ENABLE_BACKTRACE > > gossip_backtrace(); > > +#endif > > assert(0); > > return -1; > > } > > > > Patch applied well. > > > > Kind regards > > > > > > Henk > > > > > > > > Thanks, > > > Becky > > > > > > On Mon, Jul 30, 2012 at 4:50 PM, Henk D. Schoneveld <[email protected]> > > > wrote: > > > > > > On Jul 30, 2012, at 7:34 PM, Becky Ligon wrote: > > > > > >> Great! So disabling usrint and enabling fuse was all you needed? > > > Uhh to compile yes, but to use it it failed. Posted output to John Chandy. > > >> > > >> Becky > > >> > > >> On Mon, Jul 30, 2012 at 1:10 PM, Henk D. Schoneveld <[email protected]> > > >> wrote: > > >> Thanks a lot Becky, but John Chandy reacted already off-list. I did > > >> reply my results to the list again. > > >> But again thank you for being so helpful > > >> > > >> Henk Schoneveld > > >> > > >> > > >> On Jul 30, 2012, at 5:50 PM, Becky Ligon wrote: > > >> > > >>> Henk: > > >>> > > >>> We do have a developer who has worked with OSX with the fuse client. I > > >>> am going to forward your email to him and let him help you with the > > >>> details. > > >>> > > >>> Becky Ligon > > >>> > > >>> > > >>> On Sun, Jul 29, 2012 at 11:20 PM, John Chandy <[email protected]> > > >>> wrote: > > >>> Henk, > > >>> > > >>> If all you are looking for is the fuse client, you should be able to > > >>> add "--disable-usrint" and "--enable-fuse" when you do the configure. > > >>> > > >>> If you want the user POSIX and stdio libraries, it looks like you'll > > >>> have to make some minor fixes to the usrint code so that it compiles on > > >>> MacOSX. I'm not sure if the OrangeFS developers are testing on MacOSX. > > >>> > > >>> John. > > >>> > > >>> On Jul 29, 2012, at 6:26 PM, Henk D. Schoneveld wrote: > > >>> > > >>>> John, > > >>>> > > >>>> Thanks for your answer. > > >>>> > > >>>> Installed xcode, Fuse4X, gettext and pkg-config, I'm able to configure > > >>>> orange-fs2.8.6, but make fails with > > >>>> > > >>>> CC src/client/sysint/mgmt-get-uid-list.o > > >>>> CC src/client/usrint/posix-pvfs.o > > >>>> In file included from src/client/usrint/posix-pvfs.c:13: > > >>>> src/client/usrint/usrint.h:227: warning: type defaults to ‘int’ in > > >>>> declaration of ‘off64_t’ > > >>>> src/client/usrint/usrint.h:227: error: expected ‘;’, ‘,’ or ‘)’ before > > >>>> ‘offset’ > > >>>> src/client/usrint/usrint.h:229: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ > > >>>> or ‘__attribute__’ before ‘ftell64’ > > >>>> In file included from src/client/usrint/posix-pvfs.c:14: > > >>>> src/client/usrint/posix-ops.h:35: error: expected declaration > > >>>> specifiers or ‘...’ before ‘off64_t’ > > >>>> > > >>>> Any hints on what I did wrong or miss are very welcome > > >>>> > > >>>> Henk > > >>>> On Jul 28, 2012, at 10:33 PM, John Chandy wrote: > > >>>> > > >>>>> Henk, > > >>>>> > > >>>>> pvfs2fuse was built work on OSX with Macfuse from > > >>>>> http://code.google.com/p/macfuse. It used to compile 3-4 years ago > > >>>>> when I last looked at it, but since macfuse hasnt been updated since > > >>>>> 2009, I don't know if it still works. There is a replacement for > > >>>>> macfuse called fuse4x at http://fuse4x.github.com, but I've never > > >>>>> tested pvfs2fuse with it, so you'll have to try it out and see if it > > >>>>> works. > > >>>>> > > >>>>> As long as you have the gcc build environment (from xcode), building > > >>>>> pvfs2fuse should be the same as you would do on a Linux machine. > > >>>>> > > >>>>> John. > > >>>>> > > >>>>> On Jul 28, 2012, at 2:13 PM, Henk D. Schoneveld wrote: > > >>>>> > > >>>>>> Hi all, > > >>>>>> > > >>>>>> Using five 2.8.6 metadata/io-servers en would like to use the > > >>>>>> storage on an OSX machine. pvfs2fuse is the way to go. I know how to > > >>>>>> build pvfs2fuse under linux, but have no idea how to get a working > > >>>>>> OSX version. > > >>>>>> Googled and read a modified fuse-library would be needed, which was > > >>>>>> available on a now disapeared Zumastor. > > >>>>>> > > >>>>>> Could somebody be so kind to provide me a binary version ? BTW I do > > >>>>>> need a 64bits version. > > >>>>>> > > >>>>>> I've never build something under OSX, setting things up just to > > >>>>>> build pvfs2fuse would be a real pain I gues. > > >>>>>> > > >>>>>> Kind regards > > >>>>>> > > >>>>>> Henk Schoneveld > > >>>>>> _______________________________________________ > > >>>>>> Pvfs2-users mailing list > > >>>>>> [email protected] > > >>>>>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > > >>>>> > > >>>> > > >>> > > >>> > > >>> _______________________________________________ > > >>> Pvfs2-users mailing list > > >>> [email protected] > > >>> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > > >>> > > >>> > > >>> > > >>> -- > > >>> Becky Ligon > > >>> OrangeFS Support and Development > > >>> Omnibond Systems > > >>> Anderson, South Carolina > > >>> > > >>> > > >> > > >> > > >> > > >> > > >> -- > > >> Becky Ligon > > >> OrangeFS Support and Development > > >> Omnibond Systems > > >> Anderson, South Carolina > > >> > > >> > > > > > > > > > > > > > > > -- > > > Becky Ligon > > > OrangeFS Support and Development > > > Omnibond Systems > > > Anderson, South Carolina > > > > > > > > > > > > > > > > -- > > Becky Ligon > > OrangeFS Support and Development > > Omnibond Systems > > Anderson, South Carolina > > > > > > > > > -- > Becky Ligon > OrangeFS Support and Development > Omnibond Systems > Anderson, South Carolina > > _______________________________________________ Pvfs2-users mailing list [email protected] http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
