Problem solved, on Lion. Installed Fuse4X, copied the binary from my Snow Leopard machine to my Lion machine and it mounts without any problem.
Henk On Aug 7, 2012, at 8:41 PM, Becky Ligon wrote: > Henk: > > Another question: Are you trying to run a PVFS server on the MAC? > > Becky > > On Tue, Aug 7, 2012 at 2:40 PM, Becky Ligon <[email protected]> wrote: > Henk: > > I have been successful in running the fuse client from my MAC to access my > PVFS files on my Linux workstation. > > For the problem below: does your server config file have the same BMI > address setup (tcp://192.168.1.111:3334)? Or, does your server config file > have "tcp://n11:3334"? If so, make sure your MAC understands "n11" and use > "tcp://n11:3334" in your /etc/pvfs2tab file. See if this works. > > Becky > > > On Mon, Aug 6, 2012 at 11:34 AM, Henk D. Schoneveld <[email protected]> > wrote: > > On Aug 6, 2012, at 4:53 PM, Becky Ligon wrote: > > > Henk: > > > > Can you send me your mount command and your pvfs2tab file? > Of course. BTW compiling and installing worked after patch -R , as mentioned > by John, but mounting doesn't > > /etc/pvfs2tab contains > tcp://192.168.1.111:3334/pvfs2-fs /data2 pvfs2 defaults,noauto 0 0 > /etc/hosts contains > 192.168.1.111 n11 > 192.168.1.112 n12 > 192.168.1.113 n13 > > The OSX client has a networkinterface > en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > ether 90:fb:a6:2a:6d:9b > inet6 fe80::92fb:a6ff:fe2a:6d9b%en0 prefixlen 64 scopeid 0x4 > inet 192.168.1.16 netmask 0xffffff00 broadcast 192.168.1.255 > media: autoselect (1000baseT <full-duplex,flow-control>) > status: active > > In my home directory I make a directory t > > pvfs2fuse t > > is the used mount command which under linux mounts the desired pvfs2-server > via n11 > > Under OSX I get > > pvfs2fuse t > [E 17:34:08.712665] PVFS_isys_fs_add: Failed to initialize any appropriate > BMI methods for addresses: > [E 17:34:08.713816] ??? > [E 17:34:08.713856] PVFS_isys_fs_add call: Protocol not available > [E 17:34:08.713893] ERROR: could not initialize any file systems in > /etc/pvfs2tab. > PVFS_util_init_defaults: Operation not supported by device (error class: 0) > > Henk > > > > Becky > > > > On Mon, Aug 6, 2012 at 5:26 AM, Henk D. Schoneveld <[email protected]> > > wrote: > > > > On Aug 6, 2012, at 10:24 AM, Henk D. Schoneveld wrote: > > > > > > > > On Aug 4, 2012, at 6:33 PM, John Chandy wrote: > > > > > >> I think I may have done the diff backwards. Do the patch with -R. > > > I applied your patch with -R and now it applies. configure and build work > > > but install still gives me: > > > > > > sudo make install > > > Password: > > > install -d /usr/share/man/man1 > > > install -d /usr/share/man/man5 > > > rm -f /usr/share/man/man1/*.gz > > > rm -f /usr/share/man/man5/*.gz > > > install -m 644 ./doc/man/*.1 /usr/share/man/man1 > > > install -m 644 ./doc/man/*.5 /usr/share/man/man5 > > > gzip -f /usr/share/man/man1/*.1 > > > gzip: /usr/share/man/man1/bzip2recover.1: No such file or directory > > > gzip: /usr/share/man/man1/c++.1: No such file or directory > > > gzip: /usr/share/man/man1/cpp.1: No such file or directory > > > gzip: /usr/share/man/man1/g++.1: No such file or directory > > > gzip: /usr/share/man/man1/gcc.1: No such file or directory > > > gzip: /usr/share/man/man1/gcov.1: No such file or directory > > > gzip: /usr/share/man/man1/tar.1: No such file or directory > > > make: *** [install_doc] Error 1 > > > > Leaving out --prefix=/usr makes it install. > > > > But doing a mount, results in: > > > > pvfs2fuse ~/t > > [E 11:23:22.477870] PVFS_isys_fs_add: Failed to initialize any appropriate > > BMI methods for addresses: > > [E 11:23:22.479045] ??? > > [E 11:23:22.479086] PVFS_isys_fs_add call: Protocol not available > > [E 11:23:22.479121] ERROR: could not initialize any file systems in > > /etc/pvfs2tab. > > PVFS_util_init_defaults: Operation not supported by device (error class: 0) > > > > Henk > > > > > >> John. > > >> > > >> On Aug 4, 2012, at 6:37 AM, Henk D. Schoneveld wrote: > > >> > > >>> Hi John, > > >>> > > >>> First thanks for putting the effort in to help. > > >>> > > >>> It looks like we don't have the same sources. > > >>> > > >>> The patch doesn't apply. If I do > > >>> > > >>> grep "glibtool --mode=link" Makefile* > > >>> > > >>> which is in your patch to remove from Makefile.in it's only found in > > >>> your patch not in Makefile.in. > > >>> > > >>> My sources are from a tarball > > >>> -rw-r--r-- 1 belcampo staff 2778466 Jul 15 16:08 > > >>> ../../downloads/orangefs-2.8.6.tar.gz > > >>> > > >>> > > >>> Kind regards > > >>> > > >>> Henk Schoneveld > > >>> > > >>> On Aug 4, 2012, at 8:19 AM, John Chandy wrote: > > >>> > > >> > > > > > > > > > _______________________________________________ > > Pvfs2-users mailing list > > [email protected] > > http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > > > > > > > > -- > > Becky Ligon > > OrangeFS Support and Development > > Omnibond Systems > > Anderson, South Carolina > > > > > > > > > -- > Becky Ligon > OrangeFS Support and Development > Omnibond Systems > Anderson, South Carolina > > > > > > -- > Becky Ligon > OrangeFS Support and Development > Omnibond Systems > Anderson, South Carolina > >
_______________________________________________ Pvfs2-users mailing list [email protected] http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
