Hi Leonardo, It is D1F5.
In the mean time, I did find the issue. It was another set of fixes. So not so much the one that were pointed out. But since Pietro Popoli probably just replaced his while code drop he, also got the other ones. Off-line Mike Krufky, indentified the issue. I then found the required patches. The following 4 patches were required: http://www.mail-archive.com/[email protected]/msg05570.html Now I can tune dvbt as well. However, I'm still curious as why you ask for the revision? You are referring to the detection issue, where the EEPROM has a different ID? Kind regards, Armin -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Leonardo Muffatti Sent: Wednesday, March 31, 2010 2:28 PM To: 'Communications nexus for pvrusb2 driver' Subject: Re: [pvrusb2] HVR-1900 dvb-t problems Hi, Armin What is your encoder model and revision? HVR-1900 Hauppauge model 73219, rev D1E9 or HVR-1900 Hauppauge model 73219, rev D1F5 Regards, Leonardo -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Armin Gerritsen Sent: Wednesday, 31 March, 2010 00:43 To: [email protected] Subject: Re: [pvrusb2] HVR-1900 dvb-t problems Pietro Popoli <pietro.pop...@...> writes: > > I did some tests on loading the firmware dvb-fe-tda10048-1.0.fw. > > I used the firmware downloaded from > http://tw1965.myweb.hinet.net/Linux/firmware.tar.gz. > > The upload of the firmware is required, if not already loaded into the > HVR-1900, when an application DVB-T is launched. > > This is the output of dmesg: > tda10048_firmware_upload: waiting for firmware upload > (dvb-fe-tda10048-1.0.fw)... > usb 1-4.1: firmware: requesting dvb-fe-tda10048-1.0.fw > tda10048_firmware_upload: firmware read 24878 bytes. > tda10048_firmware_upload: firmware uploading > tda10048_firmware_upload: firmware uploaded > > In my version of the HVR-1900 73219 LF REV D1F5 after loading the > firmware dvb-fe-tda10048-1.0.fw DVB-T still does not work. > > I followed the suggestions of Leonardo Muffatti (post > http://www.isely.net/pipermail/pvrusb2/2010-February/002729.html) I > thank very much for sending me the necessary changes in sources of V4L. > > With the changes of Leonardo now dvb-t works. > > Leonardo also sent me his version of the firmware > dvb-fe-tda10048-1.0.fw different from those found on the web. > I tried both firmware. It seems to me, but it could be a subjective > feeling, that with the firmware of Leonardo the video is more smooth. > Thank to Aljaž, Leonardo and Mike for their cooperation. Hello Pietro, Could you elaborate a bit more on what 'the changes are'. I seem to have the same issue as you have: analog works, with digital doesn't. It loads the firmware, but finds no frequencies using w_scan. Using tzap to tune to a know frequency doesn't produce a lock. The patches however that you refer too, in case they are missing, would however have caused the tuner not to load the firmware at all, as it wouldn't detect the device at all. I know this, as I had an older dvb drop, and had to apply these patches to make the tuner to be detected at all. And indeed as elsewhere noted, if you have a more recent drop, these patches are already in. The fact that you're system already detected it, also suggests you already had these patches. So the question remains, what solved it for you? But correct me if I'm wrong here. Regards, Armin _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2 _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2 This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. _______________________________________________ pvrusb2 mailing list [email protected] http://www.isely.net/cgi-bin/mailman/listinfo/pvrusb2
