Joris, this is a well known problem with the NVIDIA cards. It gets better with the newer highend cards but does not go away completely. You may want to invest in such a card and play around with different drivers.
Carsten > -----Original Message----- > From: [email protected] > [mailto:[email protected]]on Behalf Of Joris > Beld > Sent: Wednesday, March 12, 2008 4:44 AM > To: [email protected] > Subject: [PyMOL] hardware stereo problem > > > Dear Pymol users, > > We have a problem with one of our hardware stereo equipped PCs. > > For some reason, hardware stereo works fine for about 30sec but than > switches to an inverted 3D image. And it keeps switching back > and forth > between the 'normal' 3D image and the inverted one, every > 30sec. This is > pretty annoying and even after reinstalling winXP, the right nvidia > driver and playing around with all possible nvidia settings, > we cannot > find the problem. The problem is not Pymol specific, having the same > problem in DSviewer. Does anybody recognize this problem? > > The PC (AMD X2, 4GB, Nvidia quadro4 980XGL) is running winXP > and one of > the latest pymol builds (1.0r2). > The monitor is a high-end 21" (EIZO Flexscan T966) and we are using a > stereographics emitter. > > Thanks a lot in advance. > Best, > > Joris Beld > ETH Zürich > Switzerland > > -------------------------------------------------------------- > ----------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > PyMOL-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/pymol-users > >
