Joris, We used to experience this problem occasionally on Linux, but not anymore.
Your best bet is to update to the latest drivers. If that does not work, then this may be an unsolvable hardware issue on older cards. Cheers, Warren -- DeLano Scientific LLC Subscriber Support Services mailto:[email protected] > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf > Of Joris Beld > Sent: Wednesday, March 12, 2008 1:44 AM > To: [email protected] > Subject: [PyMOL] hardware stereo problem > > Dear Pymol users, > > We have a problem with one of our hardware stereo equipped PCs. > > For some reason, hardware stereo works fine for about 30sec > but than switches to an inverted 3D image. And it keeps > switching back and forth between the 'normal' 3D image and > the inverted one, every 30sec. This is pretty annoying and > even after reinstalling winXP, the right nvidia driver and > playing around with all possible nvidia settings, we cannot > find the problem. The problem is not Pymol specific, having > the same problem in DSviewer. Does anybody recognize this problem? > > The PC (AMD X2, 4GB, Nvidia quadro4 980XGL) is running winXP > and one of the latest pymol builds (1.0r2). > The monitor is a high-end 21" (EIZO Flexscan T966) and we are > using a stereographics emitter. > > Thanks a lot in advance. > Best, > > Joris Beld > ETH Zürich > Switzerland > > -------------------------------------------------------------- > ----------- > This SF.net email is sponsored by: Microsoft Defy all > challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > PyMOL-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/pymol-users
