Dear James,
Thank you for your help! I tried versions 364.19, 352.79, 340.96, and none
of them worked. Finally, I tried version 304.131 and it worked! (although
my graphics card is listed as supported under all versions). Later I
realized that command nvidia-detect could check which driver should be
installed.
And NVidia driver solved the slow pymol problem!
Thanks for the help,
Chen
On Fri, May 6, 2016 at 1:23 PM, James Kress <jimkress...@kressworks.org>
wrote:
> The NVIDIA driver for x64 Linux is free and can be downloaded here:
>
> http://www.nvidia.com/download/driverResults.aspx/101818/en-us
>
>
>
> Or you can search here for something different:
>
> http://www.nvidia.com/Download/Find.aspx?lang=en-us
>
>
>
> Jim
>
>
>
> James Kress Ph.D., President
>
> The KressWorks® Foundation
>
> An IRS Approved 501 (c)(3) Charitable, Nonprofit Organization
>
> “*Engineering The Cure*” ©
>
> (248) 573-5499
>
>
>
> Learn More and Donate At:
>
> Website: http://www.kressworks.org
>
> Facebook: https://www.facebook.com/KressWorks.Foundation/
>
> Twitter: @KressWorksFnd
>
>
>
> Confidentiality Notice | This e-mail message, including any attachments,
> is for the sole use of the intended recipient(s) and may contain
> confidential or proprietary information. Any unauthorized review, use,
> disclosure or distribution is prohibited. If you are not the intended
> recipient, immediately contact the sender by reply e-mail and destroy all
> copies of the original message.
>
>
>
> *From:* Chen Zhao [mailto:chenzhaoh...@gmail.com]
> *Sent:* Friday, May 06, 2016 10:50 AM
> *To:* pymol-users@lists.sourceforge.net
> *Subject:* [PyMOL] Slow Pymol rendering
>
>
>
> Dear all,
>
> I recently upgraded to Debian 8 and I compiled the source code for pymol
> 1.8.2.0. However, the graphics is really slow. The information that pymol
> prints out is as follows:
>
> Detected OpenGL version 2.0 or greater. Shaders available.
> Detected GLSL version 1.30.
> OpenGL graphics engine:
> GL_VENDOR: nouveau
> GL_RENDERER: Gallium 0.4 on NVE7
> GL_VERSION: 3.0 Mesa 10.3.2
> Detected blacklisted graphics driver. Disabling shaders.
> Detected 8 CPU cores. Enabled multithreaded rendering.
>
> I am not sure whether it is related to the driver of my graphics card. I
> have a NVIDIA Corporation GK107GLM [Quadro K1000M] but I failed to install
> the non free Nvidia driver. I instead used the open source nouveau.
>
> I appreciate your inputs!
>
> Best,
>
> Chen
>
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial!
https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________
PyMOL-users mailing list (PyMOL-users@lists.sourceforge.net)
Info Page: https://lists.sourceforge.net/lists/listinfo/pymol-users
Archives: http://www.mail-archive.com/pymol-users@lists.sourceforge.net
