a crash occurred when installing py26-pyside
See attached log file.
Using up to date macport install
under MacOSX 10.6.6
David
Le 11/03/11 10:00, Matti Airas a écrit :
Hi all,
Mark Moll <[email protected]> just mailed me to inform that PySide has been
added to MacPorts (specifically, these ports):
https://trac.macports.org/browser/trunk/dports/devel/apiextractor/Portfile
https://trac.macports.org/browser/trunk/dports/devel/generatorrunner/Portfile
https://trac.macports.org/browser/trunk/dports/python/py26-shiboken/Portfile
https://trac.macports.org/browser/trunk/dports/python/py26-pyside/Portfile
https://trac.macports.org/browser/trunk/dports/python/py27-shiboken/Portfile
https://trac.macports.org/browser/trunk/dports/python/py27-pyside/Portfile
Could any OS X users sanity check these packages?
Thanks!
ma.
_______________________________________________
PySide mailing list
[email protected]
http://lists.pyside.org/listinfo/pyside
version:1
:debug:main epoch: in tree: 0 installed: 0
:debug:main cmake 2.8.4_0 exists in the ports tree
:debug:main cmake 2.8.4_0 is the latest installed
:debug:main cmake 2.8.4_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! cmake 2.8.4_0 >= cmake 2.8.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libidn 1.20_0 exists in the ports tree
:debug:main libidn 1.20_0 is the latest installed
:debug:main libidn 1.20_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! libidn 1.20_0 >= libidn 1.20_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libiconv 1.13.1_0 exists in the ports tree
:debug:main libiconv 1.13.1_0 +universal is the latest installed
:debug:main libiconv 1.13.1_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main gettext 0.18.1.1_2 exists in the ports tree
:debug:main gettext 0.18.1.1_2 +universal is the latest installed
:debug:main gettext 0.18.1.1_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main ncurses 5.8_1 exists in the ports tree
:debug:main ncurses 5.8_1 +universal is the latest installed
:debug:main ncurses 5.8_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! ncurses 5.8_1 >= ncurses 5.8_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main expat 2.0.1_1 exists in the ports tree
:debug:main expat 2.0.1_1 +universal is the latest installed
:debug:main expat 2.0.1_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
:debug:main epoch: in tree: 1 installed: 1
:debug:main openssl 1.0.0d_0 exists in the ports tree
:debug:main openssl 1.0.0d_0 +universal is the latest installed
:debug:main openssl 1.0.0d_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main zlib 1.2.5_0 exists in the ports tree
:debug:main zlib 1.2.5_0 +universal is the latest installed
:debug:main zlib 1.2.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main qt4-mac 4.7.2_0 exists in the ports tree
:debug:main qt4-mac 4.7.2_0 +quartz is the latest installed
:debug:main qt4-mac 4.7.2_0 +quartz is active
:debug:main Merging existing variants '+quartz' into variants
:debug:main new fully merged portvariants: quartz +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant quartz provides quartz
:debug:main No need to upgrade! qt4-mac 4.7.2_0 >= qt4-mac 4.7.2_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main dbus 1.2.24_1 exists in the ports tree
:debug:main dbus 1.2.24_1 is the latest installed
:debug:main dbus 1.2.24_1 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! dbus 1.2.24_1 >= dbus 1.2.24_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main sqlite3 3.7.5_0 exists in the ports tree
:debug:main sqlite3 3.7.5_0 +universal is the latest installed
:debug:main sqlite3 3.7.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! sqlite3 3.7.5_0 >= sqlite3 3.7.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main readline 6.2.000_0 exists in the ports tree
:debug:main readline 6.2.000_0 +universal is the latest installed
:debug:main readline 6.2.000_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main tiff 3.9.4_0 exists in the ports tree
:debug:main tiff 3.9.4_0 +universal is the latest installed
:debug:main tiff 3.9.4_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main jpeg 8c_0 exists in the ports tree
:debug:main jpeg 8c_0 +universal is the latest installed
:debug:main jpeg 8c_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libpng 1.4.5_0 exists in the ports tree
:debug:main libpng 1.4.5_0 +universal is the latest installed
:debug:main libpng 1.4.5_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libpng 1.4.5_0 >= libpng 1.4.5_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libmng 1.0.10_2 exists in the ports tree
:debug:main libmng 1.0.10_2 is the latest installed
:debug:main libmng 1.0.10_2 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main lcms 1.19_2 exists in the ports tree
:debug:main lcms 1.19_2 +universal is the latest installed
:debug:main lcms 1.19_2 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2
:debug:main epoch: in tree: 0 installed: 0
:debug:main generatorrunner 0.6.7_0 exists in the ports tree
:debug:main generatorrunner 0.6.7_0 is the latest installed
:debug:main generatorrunner 0.6.7_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/generatorrunner
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! generatorrunner 0.6.7_0 >= generatorrunner
0.6.7_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main apiextractor 0.10.0_0 exists in the ports tree
:debug:main apiextractor 0.10.0_0 is the latest installed
:debug:main apiextractor 0.10.0_0 is active
:debug:main Merging existing variants '' into variants
:debug:main new fully merged portvariants:
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/apiextractor
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main No need to upgrade! apiextractor 0.10.0_0 >= apiextractor 0.10.0_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxml2 2.7.8_0 exists in the ports tree
:debug:main libxml2 2.7.8_0 +universal is the latest installed
:debug:main libxml2 2.7.8_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main libxslt 1.1.26_0 exists in the ports tree
:debug:main libxslt 1.1.26_0 +universal is the latest installed
:debug:main libxslt 1.1.26_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main adding the default universal variant
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0
:debug:main epoch: in tree: 0 installed: 0
:debug:main python26 2.6.6_1 exists in the ports tree
:debug:main python26 2.6.6_1 +universal is the latest installed
:debug:main python26 2.6.6_1 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python26
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! python26 2.6.6_1 >= python26 2.6.6_1
:debug:main epoch: in tree: 0 installed: 0
:debug:main db46 4.6.21_6 exists in the ports tree
:debug:main db46 4.6.21_6 +universal is the latest installed
:debug:main db46 4.6.21_6 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
:debug:main epoch: in tree: 0 installed: 0
:debug:main gdbm 1.8.3_3 exists in the ports tree
:debug:main gdbm 1.8.3_3 +universal is the latest installed
:debug:main gdbm 1.8.3_3 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
:debug:main epoch: in tree: 0 installed: 0
:debug:main bzip2 1.0.6_0 exists in the ports tree
:debug:main bzip2 1.0.6_0 +universal is the latest installed
:debug:main bzip2 1.0.6_0 +universal is active
:debug:main Merging existing variants '+universal' into variants
:debug:main new fully merged portvariants: universal +
:debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
:debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386
:debug:main org.macports.load registered provides 'load', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.unload registered provides 'unload', a pre-existing
procedure. Target override will not be provided
:debug:main org.macports.distfiles registered provides 'distfiles', a
pre-existing procedure. Target override will not be provided
:debug:main Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
:debug:main universal variant already exists, so not adding the default one
:debug:main Executing variant universal provides universal
:debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
:msg:main ---> Computing dependencies for py26-pyside:info:main .:debug:main
Searching for dependency: cmake
:debug:main Found Dependency: receipt exists for cmake
:debug:main Searching for dependency: qt4-mac
:debug:main Found Dependency: receipt exists for qt4-mac
:debug:main Searching for dependency: generatorrunner
:debug:main Found Dependency: receipt exists for generatorrunner
:debug:main Searching for dependency: python26
:debug:main Found Dependency: receipt exists for python26
:msg:main
:debug:main Executing org.macports.main (py26-pyside)
:debug:main Skipping completed org.macports.fetch (py26-pyside)
:debug:main Skipping completed org.macports.checksum (py26-pyside)
:debug:main setting option extract.cmd to /usr/bin/bzip2
:debug:main Skipping completed org.macports.extract (py26-pyside)
:debug:main Skipping completed org.macports.patch (py26-pyside)
:msg:main ---> Configuring py26-pyside
:debug:main Using compiler 'Mac OS X gcc 4.2'
:debug:configure configure phase started at Fri Mar 11 16:05:08 CET 2011
:debug:configure Executing proc-pre-org.macports.configure-configure-0
:debug:configure Executing org.macports.configure (py26-pyside)
:debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-O2 -arch
x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64'
LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6'
CXX='/usr/bin/g++-4.2'
CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyside/work/.CC_PRINT_OPTIONS'
F90FLAGS='-O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64'
OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2 -m64' INSTALL='/usr/bin/install -c'
OBJCFLAGS='-O2 -arch x86_64' FFLAGS='-O2 -m64' CC_PRINT_OPTIONS='YES'
CC='/usr/bin/gcc-4.2'
:debug:configure Assembled command: 'cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyside/work/pyside-qt4.7+1.0.0"
&& cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON
-DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release
-DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
-DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
-DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev
-DBUILD_TESTS:BOOL=FALSE
-DSITE_PACKAGE=/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages
-DCMAKE_OSX_ARCHITECTURES="x86_64"'
:info:configure CMake Error at CMakeLists.txt:9 (find_package):
:info:configure Could not find module FindShiboken.cmake or a configuration
file for
:info:configure package Shiboken.
:info:configure
:info:configure Adjust CMAKE_MODULE_PATH to find FindShiboken.cmake or set
Shiboken_DIR to
:info:configure the directory containing a CMake configuration file for
Shiboken. The file
:info:configure will have one of the following names:
:info:configure
:info:configure ShibokenConfig.cmake
:info:configure shiboken-config.cmake
:info:configure
:info:configure
:info:configure
:info:configure -- Detected OS: mac
:info:configure -- PySide will be generated using the protected hack!
:info:configure -- QT_SRC_DIR variable not set or graphviz not found, apidoc
generation targets disabled.
:info:configure -- Configuring incomplete, errors occurred!
:info:configure shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyside/work/pyside-qt4.7+1.0.0"
&& cmake -DCMAKE_INSTALL_PREFIX=/opt/local -DCMAKE_VERBOSE_MAKEFILE=ON
-DCMAKE_COLOR_MAKEFILE=ON -DCMAKE_BUILD_TYPE=Release
-DCMAKE_BUILD_WITH_INSTALL_RPATH=ON -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
-DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
-DCMAKE_MODULE_PATH=/opt/local/share/cmake/modules -Wno-dev
-DBUILD_TESTS:BOOL=FALSE
-DSITE_PACKAGE=/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages
-DCMAKE_OSX_ARCHITECTURES="x86_64" " returned error 1
:error:configure Target org.macports.configure returned: configure failure:
shell command failed (see log for details)
:debug:configure Backtrace: configure failure: shell command failed (see log
for details)
while executing
"$procedure $targetname"
:info:configure Warning: the following items did not execute (for py26-pyside):
org.macports.activate org.macports.configure org.macports.build
org.macports.destroot org.macports.install
:notice:configure Log for py26-pyside is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py26-pyside/main.log
_______________________________________________
PySide mailing list
[email protected]
http://lists.pyside.org/listinfo/pyside
