On Fri, 6 Jun 2025 09:27:05 -0700
Fan Ni <nifan....@gmail.com> wrote:

> On Thu, Jun 05, 2025 at 11:42:20PM +0000, anisa.su...@gmail.com wrote:
> > From: Anisa Su <anisa...@samsung.com>
> > 
> > FM DCD Management command 0x5602 implemented per CXL r3.2 Spec Section 
> > 7.6.7.6.3
> > 
> > Signed-off-by: Anisa Su <anisa...@samsung.com>
> > ---  
> 
> One minor comment, otherwise LGTM.
> 
> >  hw/cxl/cxl-mailbox-utils.c   | 86 ++++++++++++++++++++++++++++++++++++
> >  hw/mem/cxl_type3.c           |  6 +--
> >  include/hw/cxl/cxl_device.h  |  3 ++
> >  include/hw/cxl/cxl_mailbox.h |  6 +++
> >  4 files changed, 98 insertions(+), 3 deletions(-)
> > 
> > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> > index 1b5c7216f9..47b1509a0e 100644
> > --- a/hw/cxl/cxl-mailbox-utils.c
> > +++ b/hw/cxl/cxl-mailbox-utils.c
> > @@ -121,6 +121,7 @@ enum {
> >      FMAPI_DCD_MGMT = 0x56,
> >          #define GET_DCD_INFO    0x0
> >          #define GET_HOST_DC_REGION_CONFIG   0x1
> > +        #define SET_DC_REGION_CONFIG        0x2
> >  };
> >  
> >  /* CCI Message Format CXL r3.1 Figure 7-19 */
> > @@ -3387,6 +3388,84 @@ static CXLRetCode 
> > cmd_fm_get_host_dc_region_config(const struct cxl_cmd *cmd,
> >      return CXL_MBOX_SUCCESS;
> >  }
> >  
> > +/* CXL r3.2 section 7.6.7.6.3: Set Host DC Region Configuration (Opcode 
> > 5602) */
> > +static CXLRetCode cmd_fm_set_dc_region_config(const struct cxl_cmd *cmd,
> > +                                              uint8_t *payload_in,
> > +                                              size_t len_in,
> > +                                              uint8_t *payload_out,
> > +                                              size_t *len_out,
> > +                                              CXLCCI *cci)
> > +{
> > +    struct {
> > +        uint8_t reg_id;
> > +        uint8_t rsvd[3];
> > +        uint64_t block_sz;
> > +        uint8_t flags;
> > +        uint8_t rsvd2[3];
> > +    } QEMU_PACKED *in = (void *)payload_in;
> > +    CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> > +    CXLEventDynamicCapacity dcEvent = {};
> > +    CXLDCRegion *region = &ct3d->dc.regions[in->reg_id];
> > +
> > +    /*
> > +     * CXL r3.2 7.6.7.6.3: Set DC Region Configuration
> > +     * This command shall fail with Unsupported when the Sanitize on 
> > Release
> > +     * field does not match the region’s configuration... and the device
> > +     * does not support reconfiguration of the Sanitize on Release setting.
> > +     *
> > +     * Currently not reconfigurable, so always fail if sanitize bit (bit 0)
> > +     * doesn't match.
> > +     */
> > +    if ((in->flags & 0x1) != (region->flags & 0x1)) {
> > +        return CXL_MBOX_UNSUPPORTED;
> > +    }
> > +
> > +    if (in->reg_id >= DCD_MAX_NUM_REGION) {
> > +        return CXL_MBOX_UNSUPPORTED;
> > +    }
> > +
> > +    /* Return success if new block size == current block size */
> > +    if (in->block_sz == region->block_size) {
> > +        return CXL_MBOX_SUCCESS;
> > +    }  
> 
> Should we move this below, after checking the bitmap?
Yes.  The text is a little confusing but the list of what should
fail with unsupported doesn't allow an exception for a noop
request. I've made that tweak on the updated tree I'm building now.

If there is another version of this series please make this change.

Jonathan
> 
> Fan
> > +
> > +    /* Check that no extents are in the region being reconfigured */
> > +    if (!bitmap_empty(region->blk_bitmap, region->len / 
> > region->block_size)) {
> > +        return CXL_MBOX_UNSUPPORTED;
> > +    }
> > +
> > +    /* Check that new block size is supported */
> > +    if (!test_bit(BIT((int) log2(in->block_sz)),
> > +                  &region->supported_blk_size_bitmask)) {
> > +        return CXL_MBOX_INVALID_INPUT;
> > +    }
> > +
> > +    /* Free bitmap and create new one for new block size. */
> > +    qemu_mutex_lock(&region->bitmap_lock);
> > +    g_free(region->blk_bitmap);
> > +    region->blk_bitmap = bitmap_new(region->len / in->block_sz);
> > +    qemu_mutex_unlock(&region->bitmap_lock);
> > +    region->block_size = in->block_sz;
> > +
> > +    /* Create event record and insert into event log */
> > +    cxl_assign_event_header(&dcEvent.hdr,
> > +                            &dynamic_capacity_uuid,
> > +                            (1 << CXL_EVENT_TYPE_INFO),
> > +                            sizeof(dcEvent),
> > +                            cxl_device_get_timestamp(&ct3d->cxl_dstate));
> > +    dcEvent.type = DC_EVENT_REGION_CONFIG_UPDATED;
> > +    dcEvent.validity_flags = 1;
> > +    dcEvent.host_id = 0;
> > +    dcEvent.updated_region_id = in->reg_id;
> > +
> > +    if (cxl_event_insert(&ct3d->cxl_dstate,
> > +                         CXL_EVENT_TYPE_DYNAMIC_CAP,
> > +                         (CXLEventRecordRaw *)&dcEvent)) {
> > +        cxl_event_irq_assert(ct3d);
> > +    }
> > +    return CXL_MBOX_SUCCESS;
> > +}
> > +
> >  static const struct cxl_cmd cxl_cmd_set[256][256] = {
> >      [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { 
> > "BACKGROUND_OPERATION_ABORT",
> >          cmd_infostat_bg_op_abort, 0, 0 },
> > @@ -3505,6 +3584,13 @@ static const struct cxl_cmd 
> > cxl_cmd_set_fm_dcd[256][256] = {
> >          cmd_fm_get_dcd_info, 0, 0 },
> >      [FMAPI_DCD_MGMT][GET_HOST_DC_REGION_CONFIG] = { 
> > "GET_HOST_DC_REGION_CONFIG",
> >          cmd_fm_get_host_dc_region_config, 4, 0 },
> > +    [FMAPI_DCD_MGMT][SET_DC_REGION_CONFIG] = { "SET_DC_REGION_CONFIG",
> > +        cmd_fm_set_dc_region_config, 16,
> > +        (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> > +         CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> > +         CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> > +         CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> > +         CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> >  };
> >  
> >  /*
> > diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> > index b872a26173..ee554a77be 100644
> > --- a/hw/mem/cxl_type3.c
> > +++ b/hw/mem/cxl_type3.c
> > @@ -1590,9 +1590,9 @@ void qmp_cxl_inject_correctable_error(const char 
> > *path, CxlCorErrorType type,
> >      pcie_aer_inject_error(PCI_DEVICE(obj), &err);
> >  }
> >  
> > -static void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> > -                                    const QemuUUID *uuid, uint32_t flags,
> > -                                    uint8_t length, uint64_t timestamp)
> > +void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> > +                             const QemuUUID *uuid, uint32_t flags,
> > +                             uint8_t length, uint64_t timestamp)
> >  {
> >      st24_le_p(&hdr->flags, flags);
> >      hdr->length = length;
> > diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> > index 96ef9be444..76af75d2d0 100644
> > --- a/include/hw/cxl/cxl_device.h
> > +++ b/include/hw/cxl/cxl_device.h
> > @@ -721,4 +721,7 @@ void ct3_clear_region_block_backed(CXLType3Dev *ct3d, 
> > uint64_t dpa,
> >                                     uint64_t len);
> >  bool ct3_test_region_block_backed(CXLType3Dev *ct3d, uint64_t dpa,
> >                                    uint64_t len);
> > +void cxl_assign_event_header(CXLEventRecordHdr *hdr,
> > +                             const QemuUUID *uuid, uint32_t flags,
> > +                             uint8_t length, uint64_t timestamp);
> >  #endif
> > diff --git a/include/hw/cxl/cxl_mailbox.h b/include/hw/cxl/cxl_mailbox.h
> > index 9008402d1c..a05d7cb5b7 100644
> > --- a/include/hw/cxl/cxl_mailbox.h
> > +++ b/include/hw/cxl/cxl_mailbox.h
> > @@ -8,6 +8,7 @@
> >  #ifndef CXL_MAILBOX_H
> >  #define CXL_MAILBOX_H
> >  
> > +#define CXL_MBOX_CONFIG_CHANGE_COLD_RESET (1)
> >  #define CXL_MBOX_IMMEDIATE_CONFIG_CHANGE (1 << 1)
> >  #define CXL_MBOX_IMMEDIATE_DATA_CHANGE (1 << 2)
> >  #define CXL_MBOX_IMMEDIATE_POLICY_CHANGE (1 << 3)
> > @@ -15,5 +16,10 @@
> >  #define CXL_MBOX_SECURITY_STATE_CHANGE (1 << 5)
> >  #define CXL_MBOX_BACKGROUND_OPERATION (1 << 6)
> >  #define CXL_MBOX_BACKGROUND_OPERATION_ABORT (1 << 7)
> > +#define CXL_MBOX_SECONDARY_MBOX_SUPPORTED (1 << 8)
> > +#define CXL_MBOX_REQUEST_ABORT_BACKGROUND_OP_SUPPORTED (1 << 9)
> > +#define CXL_MBOX_CEL_10_TO_11_VALID (1 << 10)
> > +#define CXL_MBOX_CONFIG_CHANGE_CONV_RESET (1 << 11)
> > +#define CXL_MBOX_CONFIG_CHANGE_CXL_RESET (1 << 12)
> >  
> >  #endif
> > -- 
> > 2.47.2
> >   


Reply via email to