According to Intel 6300ESB Controller Hub Datasheet 14.4.15, the interrupt type mask should be 0x03 (0b11) instead of 0x11. In the original implementation, when we want to disable all interrupt by setting the value to 0x03, we will get 0x01 which will be incorrect when we reading the value again. However, there is no problem since 0x1 is reserved and unused.
Signed-off-by: ShengYi Hung <aokbl...@freebsd.org> Sponsored by: The FreeBSD Foundation --- hw/watchdog/wdt_i6300esb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/watchdog/wdt_i6300esb.c b/hw/watchdog/wdt_i6300esb.c index bb8a2766b6..3aa01b8d68 100644 --- a/hw/watchdog/wdt_i6300esb.c +++ b/hw/watchdog/wdt_i6300esb.c @@ -55,7 +55,7 @@ /* Config register bits */ #define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */ #define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */ -#define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */ +#define ESB_WDT_INTTYPE (0x03 << 0) /* Interrupt type on timer1 timeout */ /* Reload register bits */ #define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */ -- 2.50.1
