On 09/11/2017 16:43, Philippe Mathieu-Daudé wrote:
Hi Marcel,
Cc'ing Paul and Yongbok Since I'm not sure their Boston board could also
use it.
On 11/09/2017 12:46 PM, Marcel Apfelbaum wrote:
The PCIE-PCI bridge is specific to "pure" PCIe systems
(on QEMU we have X86 and ARM), it does not make sense to
have it in other archs.
Reported-by: Thomas Huth <th...@redhat.com>
Signed-off-by: Marcel Apfelbaum <mar...@redhat.com>
---
V4 -> V5
- Since all other tries failed, conditioned the
device on the PCIe Root Port.
V3 -> V4:
- Move the config line to pci.mak (Thomas)
V2 -> V3:
- Another tweak in subject s/if/it (Cornelia)
V1 -> V2:
Addressed Thomas and Cornelia comments:
- Conditioned the pcie-pci-bridge compilation on
the PCIe Root CONFIG_PCIE_PORT
- Tweaked subject PCI -> PCIe
Thanks,
Marcel
hw/pci-bridge/Makefile.objs | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/pci-bridge/Makefile.objs b/hw/pci-bridge/Makefile.objs
index 666db37da2..1b05023662 100644
--- a/hw/pci-bridge/Makefile.objs
+++ b/hw/pci-bridge/Makefile.objs
@@ -1,5 +1,5 @@
-common-obj-y += pci_bridge_dev.o pcie_pci_bridge.o
-common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o
+common-obj-y += pci_bridge_dev.o
+common-obj-$(CONFIG_PCIE_PORT) += pcie_root_port.o gen_pcie_root_port.o
pcie_pci_bridge.o
KISS :)
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4...@amsat.org>
common-obj-$(CONFIG_PXB) += pci_expander_bridge.o
common-obj-$(CONFIG_XIO3130) += xio3130_upstream.o xio3130_downstream.o
common-obj-$(CONFIG_IOH3420) += ioh3420.o
Hi Marcel, Philippe.
It looks ok for MIPS Boston.
[Yongbok Kim:
tested for MIPS boston]
Tested-by: Yongbok Kim <yongbok....@mips.com>
Regards,
Yongbok
