Since ssi-sd is still using the legacy SD card API, the SD card created by sd_init() is not plugged into any bus. This means that the controller has to reset it manually.
Failing to do this mostly didn't affect the guest since the guest typically does a programmed SD card reset as part of its SD controller driver initialization, but meant that migration failed because it's only in sd_reset() that we set up the wpgrps_size field. In the case of sd-ssi, we have to implement an entire reset function since there wasn't one previously, and that requires a QOM cast macro that got omitted when this device was QOMified. Cc: qemu-sta...@nongnu.org Signed-off-by: Peter Maydell <peter.mayd...@linaro.org> --- hw/sd/ssi-sd.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index 24001dc..30d2a87 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -50,6 +50,9 @@ typedef struct { SDState *sd; } ssi_sd_state; +#define TYPE_SSI_SD "ssi-sd" +#define SSI_SD(obj) OBJECT_CHECK(ssi_sd_state, (obj), TYPE_SSI_SD) + /* State word bits. */ #define SSI_SDR_LOCKED 0x0001 #define SSI_SDR_WP_ERASE 0x0002 @@ -251,6 +254,24 @@ static void ssi_sd_realize(SSISlave *d, Error **errp) } } +static void ssi_sd_reset(DeviceState *dev) +{ + ssi_sd_state *s = SSI_SD(dev); + + s->mode = SSI_SD_CMD; + s->cmd = 0; + memset(s->cmdarg, 0, sizeof(s->cmdarg)); + memset(s->response, 0, sizeof(s->response)); + s->arglen = 0; + s->response_pos = 0; + s->stopping = 0; + + /* Since we're still using the legacy SD API the card is not plugged + * into any bus, and we must reset it manually. + */ + device_reset(DEVICE(s->sd)); +} + static void ssi_sd_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -260,10 +281,11 @@ static void ssi_sd_class_init(ObjectClass *klass, void *data) k->transfer = ssi_sd_transfer; k->cs_polarity = SSI_CS_LOW; dc->vmsd = &vmstate_ssi_sd; + dc->reset = ssi_sd_reset; } static const TypeInfo ssi_sd_info = { - .name = "ssi-sd", + .name = TYPE_SSI_SD, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ssi_sd_state), .class_init = ssi_sd_class_init, -- 2.7.4