On Wed, Dec 18, 2019 at 10:26:08PM +0100, Niek Linnenbank wrote: > Hi Philippe, > > This test has some problems on my host (Ubuntu 18.04.3 LTS, avocado 73.0, > python 3.6.9): > > (4/4) > tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_bionic: > ERROR: Input format not supported by decoder (3.25 s) > RESULTS : PASS 3 | ERROR 1 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 > | CANCEL 0 > JOB TIME : 46.22 s > > I suspect it didn't download the image correctly. >
I don't think it's download related, because the "archive.lzma_uncompress(image_path_xz, image_path)" line is not capable of uncompressing that 7z archive. > Regards, > Niek > > On Tue, Dec 17, 2019 at 7:27 PM Philippe Mathieu-Daudé <f4...@amsat.org> > wrote: > > > This test boots Ubuntu Bionic on a OrangePi PC board. > > > > As it requires 1GB of storage, and is slow, this test is disabled > > on automatic CI testing. > > > > It is useful for workstation testing. Currently Avocado timeouts too > > quickly, so we can't run userland commands. > > > > The kernel image and DeviceTree blob are built by the Raspbian > > project (based on Debian): > > https://www.raspbian.org/RaspbianImages > > > > The Ubuntu image is downloaded from: > > https://dl.armbian.com/orangepipc/Bionic_current > > > > This test can be run using: > > > > $ AVOCADO_ALLOW_LARGE_STORAGE=yes \ > > avocado --show=app,console run -t machine:orangepi-pc \ > > tests/acceptance/boot_linux_console.py > > console: Uncompressing Linux... done, booting the kernel. > > console: Booting Linux on physical CPU 0x0 > > console: Linux version 4.20.7-sunxi (r...@armbian.com) (gcc version > > 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET > > 2019 > > console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d > > console: CPU: div instructions available: patching division code > > console: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > > instruction cache > > console: OF: fdt: Machine model: Xunlong Orange Pi PC > > [...] > > console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB > > console: NET: Registered protocol family 10 > > console: mmc0: host does not support reading read-only switch, assuming > > write-enable > > console: mmc0: Problem switching card into high-speed mode! > > console: mmc0: new SD card at address 4567 > > console: mmcblk0: mmc0:4567 QEMU! 932 MiB > > console: Segment Routing with IPv6 > > console: NET: Registered protocol family 17 > > console: NET: Registered protocol family 15 > > console: bridge: filtering via arp/ip/ip6tables is no longer available > > by default. Update your scripts to load br_netfilter if you need this. > > console: 8021q: 802.1Q VLAN Support v1.8 > > console: Key type dns_resolver registered > > console: Registering SWP/SWPB emulation handler > > console: mmcblk0: p1 > > [...] > > console: Freeing unused kernel memory: 1024K > > console: Run /sbin/init as init process > > console: random: fast init done > > console: systemd[1]: System time before build time, advancing clock. > > console: systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT > > +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT > > +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 > > default-hierarchy=hybrid) > > console: systemd[1]: Detected architecture arm. > > console: Welcome to Ubuntu 18.04.3 LTS! > > console: systemd[1]: Set hostname to <orangepipc>. > > console: random: systemd: uninitialized urandom read (16 bytes read) > > > > Signed-off-by: Philippe Mathieu-Daudé <f4...@amsat.org> > > --- > > RFC because this is not the definitive test, but it is helpful so > > for for testing Niek work. > > --- > > tests/acceptance/boot_linux_console.py | 41 ++++++++++++++++++++++++++ > > 1 file changed, 41 insertions(+) > > > > diff --git a/tests/acceptance/boot_linux_console.py > > b/tests/acceptance/boot_linux_console.py > > index 8179b45910..663290e0c7 100644 > > --- a/tests/acceptance/boot_linux_console.py > > +++ b/tests/acceptance/boot_linux_console.py > > @@ -520,6 +520,47 @@ class BootLinuxConsole(Test): > > exec_command_and_wait_for_pattern(self, 'reboot', > > 'reboot: Restarting > > system') > > > > + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage > > limited') > > + def test_arm_orangepi_bionic(self): > > + """ > > + :avocado: tags=arch:arm > > + :avocado: tags=machine:orangepi-pc > > + """ > > + # This test download a 196MB compressed image and expand it to > > 932MB... > > + deb_url = ('https://apt.armbian.com/pool/main/l/' > > + > > 'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb') > > + deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315' > > + deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash) > > + kernel_path = self.extract_from_deb(deb_path, > > + '/boot/vmlinuz-4.20.7-sunxi') > > + dtb_path = > > '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb' > > + dtb_path = self.extract_from_deb(deb_path, dtb_path) > > + image_url = ('https://dl.armbian.com/orangepipc/archive/' > > + 'Armbian_19.11.3_Orangepipc_bionic_current_5.3.9.7z') > > + image_hash = '196a8ffb72b0123d92cea4a070894813d305c71e' > > + image_path_xz = self.fetch_asset(image_url, asset_hash=image_hash) > > + image_name = 'Armbian_19.11.3_Orangepipc_bionic_current_5.3.9.img' > > + image_path = os.path.join(self.workdir, image_name) > > + archive.lzma_uncompress(image_path_xz, image_path) I'm not sure what magic Philippe was able to do here, but I can not uncompress this file with lzma_uncompress. I'm looking into adding proper 7z support to avocado.utils.archive module, by means of either the 7z library or the py7zr Python module. - Cleber. > > + > > + self.vm.set_machine('orangepi-pc') > > + self.vm.set_console() > > + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + > > + 'console=ttyS0,115200 ' > > + 'root=/dev/mmcblk0p1 rootwait rw ' > > + 'systemd.mask=dev-ttyS0.device ' > > + 'systemd.mask=armbian-zram-config.service ' > > + 'systemd.mask=armbian-ramlog.service') > > + self.vm.add_args('-kernel', kernel_path, > > + '-dtb', dtb_path, > > + '-drive', 'file=' + image_path + > > ',if=sd,format=raw', > > + '-append', kernel_command_line, > > + '-nic', 'user', > > + '-no-reboot') > > + self.vm.launch() > > + self.wait_for_console_pattern('Welcome to Ubuntu 18.04.3 LTS!') > > + self.wait_for_console_pattern('Started Armbian filesystem > > resize.') > > + > > def test_s390x_s390_ccw_virtio(self): > > """ > > :avocado: tags=arch:s390x > > -- > > 2.21.0 > > > > > > -- > Niek Linnenbank
signature.asc
Description: PGP signature