Just one patch attached.
Thanks.

On Fri, Jan 24, 2020 at 2:49 PM Philippe Mathieu-Daudé <phi...@redhat.com>
wrote:

> On 1/24/20 12:41 PM, Michael Rolnik wrote:
> > Tested-by: Michael Rolnik <mrol...@gmail.com <mailto:mrol...@gmail.com>>
>
> Thanks a lot!
>
> > The only thing I want to change is instead of -kernel put -bios in
> > qemu-doc.texi file. Should I send a new series?
>
> Please do NOT :)
>
> Richard can do the trivial fixup directly.
>
> > On Fri, Jan 24, 2020 at 2:51 AM Philippe Mathieu-Daudé <f4...@amsat.org
> > <mailto:f4...@amsat.org>> wrote:
> >
> >     This is the AVR port from Michael release (merge) candidate 2.
> >
> >     Since v1 [1]:
> >     - Addressed Thomas comments
> >     - Fixed a non-critical bug in ATmega (incorrect SRAM base address)
> >     - Added ELF parsing requested by Aleksandar
> >     - Dropped default machine (as with the ARM port)
> >
> >     Change since rc1:
> >
> >     $ git backport-diff -u avr-rc1 -r origin/master..
> >     Key:
> >     [----] : patches are identical
> >     [####] : number of functional differences between
> >     upstream/downstream patch
> >     [down] : patch is downstream-only
> >     The flags [FC] indicate (F)unctional and (C)ontextual differences,
> >     respectively
> >
> >     001/25:[----] [--] 'target/avr: Add outward facing interfaces and
> >     core CPU logic'
> >     002/25:[----] [--] 'target/avr: Add instruction helpers'
> >     003/25:[----] [--] 'target/avr: Add instruction translation -
> >     Registers definition'
> >     004/25:[----] [--] 'target/avr: Add instruction translation -
> >     Arithmetic and Logic Instructions'
> >     005/25:[----] [--] 'target/avr: Add instruction translation - Branch
> >     Instructions'
> >     006/25:[----] [--] 'target/avr: Add instruction translation - Data
> >     Transfer Instructions'
> >     007/25:[----] [--] 'target/avr: Add instruction translation - Bit
> >     and Bit-test Instructions'
> >     008/25:[----] [--] 'target/avr: Add instruction translation - MCU
> >     Control Instructions'
> >     009/25:[----] [--] 'target/avr: Add instruction translation - CPU
> >     main translation function'
> >     010/25:[----] [--] 'target/avr: Add instruction disassembly function'
> >     011/25:[----] [--] 'hw/char: Add limited support for Atmel USART
> >     peripheral'
> >     012/25:[0045] [FC] 'hw/timer: Add limited support for Atmel 16 bit
> >     timer peripheral'
> >     013/25:[----] [--] 'hw/misc: Add Atmel power device'
> >     014/25:[0024] [FC] 'target/avr: Add section about AVR into QEMU
> >     documentation'
> >     015/25:[----] [--] 'target/avr: Register AVR support with the rest
> >     of QEMU'
> >     016/25:[----] [--] 'target/avr: Add machine none test'
> >     017/25:[0002] [FC] 'target/avr: Update MAINTAINERS file'
> >     018/25:[down]      'hw/core/loader: Let load_elf populate the
> >     processor-specific flags'
> >     019/25:[down]      'hw/avr: Add helper to load raw/ELF firmware
> >     binaries'
> >     020/25:[0015] [FC] 'hw/avr: Add some ATmega microcontrollers'
> >     021/25:[0040] [FC] 'hw/avr: Add some Arduino boards'
> >     022/25:[----] [--] 'target/avr: Update build system'
> >     023/25:[----] [--] 'tests/boot-serial-test: Test some Arduino boards
> >     (AVR based)'
> >     024/25:[----] [--] 'tests/acceptance: Test the Arduino MEGA2560
> board'
> >     025/25:[----] [--] '.travis.yml: Run the AVR acceptance tests'
> >
> >     Repo: https://gitlab.com/philmd/qemu/commits/avr-rc2
> >
> >     [1]
> https://www.mail-archive.com/qemu-devel@nongnu.org/msg672926.html
> >     Supersedes: <20200123000307.11541-1-richard.hender...@linaro.org
> >     <mailto:20200123000307.11541-1-richard.hender...@linaro.org>>
> >
> >     Michael Rolnik (20):
> >        target/avr: Add outward facing interfaces and core CPU logic
> >        target/avr: Add instruction helpers
> >        target/avr: Add instruction translation - Registers definition
> >        target/avr: Add instruction translation - Arithmetic and Logic
> >          Instructions
> >        target/avr: Add instruction translation - Branch Instructions
> >        target/avr: Add instruction translation - Data Transfer
> Instructions
> >        target/avr: Add instruction translation - Bit and Bit-test
> >          Instructions
> >        target/avr: Add instruction translation - MCU Control Instructions
> >        target/avr: Add instruction translation - CPU main translation
> >          function
> >        target/avr: Add instruction disassembly function
> >        hw/char: Add limited support for Atmel USART peripheral
> >        hw/timer: Add limited support for Atmel 16 bit timer peripheral
> >        hw/misc: Add Atmel power device
> >        target/avr: Add section about AVR into QEMU documentation
> >        target/avr: Register AVR support with the rest of QEMU
> >        target/avr: Add machine none test
> >        target/avr: Update MAINTAINERS file
> >        target/avr: Update build system
> >        tests/boot-serial-test: Test some Arduino boards (AVR based)
> >        tests/acceptance: Test the Arduino MEGA2560 board
> >
> >     Philippe Mathieu-Daudé (5):
> >        hw/core/loader: Let load_elf populate the processor-specific flags
> >        hw/avr: Add helper to load raw/ELF firmware binaries
> >        hw/avr: Add some ATmega microcontrollers
> >        hw/avr: Add some Arduino boards
> >        .travis.yml: Run the AVR acceptance tests
> >
> >       qemu-doc.texi                    |   51 +
> >       configure                        |    7 +
> >       default-configs/avr-softmmu.mak  |    5 +
> >       qapi/machine.json                |    3 +-
> >       hw/avr/atmel_atmega.h            |   48 +
> >       hw/avr/boot.h                    |   33 +
> >       include/disas/dis-asm.h          |   19 +
> >       include/elf.h                    |    2 +
> >       include/hw/char/atmel_usart.h    |   93 +
> >       include/hw/elf_ops.h             |    6 +-
> >       include/hw/loader.h              |    6 +-
> >       include/hw/misc/atmel_power.h    |   46 +
> >       include/hw/timer/atmel_timer16.h |   94 +
> >       include/sysemu/arch_init.h       |    1 +
> >       target/avr/cpu-param.h           |   37 +
> >       target/avr/cpu-qom.h             |   54 +
> >       target/avr/cpu.h                 |  259 +++
> >       target/avr/helper.h              |   29 +
> >       arch_init.c                      |    2 +
> >       hw/avr/arduino.c                 |  151 ++
> >       hw/avr/atmel_atmega.c            |  470 +++++
> >       hw/avr/boot.c                    |   74 +
> >       hw/char/atmel_usart.c            |  320 ++++
> >       hw/core/loader.c                 |   15 +-
> >       hw/misc/atmel_power.c            |  112 ++
> >       hw/riscv/boot.c                  |    2 +-
> >       hw/timer/atmel_timer16.c         |  605 ++++++
> >       target/avr/cpu.c                 |  826 ++++++++
> >       target/avr/disas.c               |  246 +++
> >       target/avr/gdbstub.c             |   84 +
> >       target/avr/helper.c              |  347 ++++
> >       target/avr/machine.c             |  121 ++
> >       target/avr/translate.c           | 2997
> ++++++++++++++++++++++++++++++
> >       tests/qtest/boot-serial-test.c   |   11 +
> >       tests/qtest/machine-none-test.c  |    1 +
> >       .travis.yml                      |    2 +-
> >       MAINTAINERS                      |   30 +
> >       gdb-xml/avr-cpu.xml              |   49 +
> >       hw/avr/Kconfig                   |    9 +
> >       hw/avr/Makefile.objs             |    3 +
> >       hw/char/Kconfig                  |    3 +
> >       hw/char/Makefile.objs            |    1 +
> >       hw/misc/Kconfig                  |    3 +
> >       hw/misc/Makefile.objs            |    2 +
> >       hw/timer/Kconfig                 |    3 +
> >       hw/timer/Makefile.objs           |    2 +
> >       target/avr/Makefile.objs         |   34 +
> >       target/avr/insn.decode           |  182 ++
> >       tests/acceptance/machine_avr6.py |   50 +
> >       tests/qtest/Makefile.include     |    2 +
> >       50 files changed, 7539 insertions(+), 13 deletions(-)
> >       create mode 100644 default-configs/avr-softmmu.mak
> >       create mode 100644 hw/avr/atmel_atmega.h
> >       create mode 100644 hw/avr/boot.h
> >       create mode 100644 include/hw/char/atmel_usart.h
> >       create mode 100644 include/hw/misc/atmel_power.h
> >       create mode 100644 include/hw/timer/atmel_timer16.h
> >       create mode 100644 target/avr/cpu-param.h
> >       create mode 100644 target/avr/cpu-qom.h
> >       create mode 100644 target/avr/cpu.h
> >       create mode 100644 target/avr/helper.h
> >       create mode 100644 hw/avr/arduino.c
> >       create mode 100644 hw/avr/atmel_atmega.c
> >       create mode 100644 hw/avr/boot.c
> >       create mode 100644 hw/char/atmel_usart.c
> >       create mode 100644 hw/misc/atmel_power.c
> >       create mode 100644 hw/timer/atmel_timer16.c
> >       create mode 100644 target/avr/cpu.c
> >       create mode 100644 target/avr/disas.c
> >       create mode 100644 target/avr/gdbstub.c
> >       create mode 100644 target/avr/helper.c
> >       create mode 100644 target/avr/machine.c
> >       create mode 100644 target/avr/translate.c
> >       create mode 100644 gdb-xml/avr-cpu.xml
> >       create mode 100644 hw/avr/Kconfig
> >       create mode 100644 hw/avr/Makefile.objs
> >       create mode 100644 target/avr/Makefile.objs
> >       create mode 100644 target/avr/insn.decode
> >       create mode 100644 tests/acceptance/machine_avr6.py
> >
> >     --
> >     2.21.1
> >
> >
> >
> > --
> > Best Regards,
> > Michael Rolnik
>
>

-- 
Best Regards,
Michael Rolnik

Attachment: 0001-target-avr-Add-section-about-AVR-into-QEMU-documenta.patch
Description: Binary data

Reply via email to