Hi Niek,
On Wed, Oct 28, 2020 at 3:55 AM Niek Linnenbank
<nieklinnenb...@gmail.com> wrote:
>
> Hello Philippe, Bin,
>
> Thanks for your support on this. I've just tried this patch and unfortunately
> it doesn't seem to
> resolve the issue, at least on my machine. This is the output that I get when
> running the avocado test for NetBSD9.0:
>
> (5/5)
> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_uboot_netbsd9:
> |console: U-Boot SPL 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000)
> console: DRAM: 1024 MiB
> console: Failed to set core voltage! Can't set CPU frequency
> console: Trying to boot from MMC1
> console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) Allwinner
> Technology
> console: CPU: Allwinner H3 (SUN8I 0000)
> ...
> console: [ 1.2957642] sdmmc0: SD card status: 4-bit, C0
> console: [ 1.3094731] ld0 at sdmmc0:
> <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062>
> console: [ 1.3159383] ld0: 1024 MB, 1040 cyl, 32 head, 63 sec, 512
> bytes/sect x 2097152 sectors
> console: [ 1.3763222] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
> console: [ 2.0592109] WARNING: 4 errors while detecting hardware; check
> system log.
> console: [ 2.0693403] boot device: ld0
> console: [ 2.0798960] root on ld0a dumps on ld0b
> console: [ 2.0994141] vfs_mountroot: can't open root device
> console: [ 2.0994141] cannot mount root, error = 6
> <FREEZE>
>
> When starting NetBSD 9.0 manually, it shows clearly that the SD card is
> recognized with 1GiB size, also from U-Boot:
> $ qemu-system-arm -M orangepi-pc -nographic -nic user -sd ./armv7.img
> WARNING: Image format was not specified for './armv7.img' and probing guessed
> raw.
> Automatically detecting the format is dangerous for raw images,
> write operations on block 0 will be restricted.
> Specify the 'raw' format explicitly to remove the restrictions.
>
> U-Boot SPL 2020.07-00610-g610e1487c8 (Jul 11 2020 - 22:31:58 +0200)
> DRAM: 1024 MiB
> Failed to set core voltage! Can't set CPU frequency
> Trying to boot from MMC1
>
> U-Boot 2020.07-00610-g610e1487c8 (Jul 11 2020 - 22:31:58 +0200) Allwinner
> Technology
>
> CPU: Allwinner H3 (SUN8I 0000)
> Model: Xunlong Orange Pi PC
> DRAM: 1 GiB
> MMC: mmc@1c0f000: 0
> ...
> Hit any key to stop autoboot: 0
> => mmc info
> Device: mmc@1c0f000
> Manufacturer ID: aa
> OEM: 5859
> Name: QEMU!
> Bus Speed: 50000000
> Mode: SD High Speed (50MHz)
> Rd Block Len: 512
> SD version 2.0
> High Capacity: No
> Capacity: 1 GiB
> Bus Width: 4-bit
> Erase Group Size: 512 Bytes
> =>
> => boot
> 8846552 bytes read in 931 ms (9.1 MiB/s)
> ...
> [ 1.3447558] sdmmc0: SD card status: 4-bit, C0
> [ 1.3546801] ld0 at sdmmc0: <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062>
> [ 1.3647790] ld0: 1024 MB, 1040 cyl, 32 head, 63 sec, 512 bytes/sect x
> 2097152 sectors
> [ 1.4150230] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
> [ 2.0800893] WARNING: 4 errors while detecting hardware; check system log.
> [ 2.0800893] boot device: ld0
> [ 2.0900792] root on ld0a dumps on ld0b
> [ 2.1004160] vfs_mountroot: can't open root device
> [ 2.1004160] cannot mount root, error = 6
> [ 2.1004160] root device (default ld0a):
> <FREEZE>
>
> Note that the image has been resized to 2GiB with qemu-img:
> $ ls -alh armv7.img
> -rw-rw-r-- 1 user user 2,0G okt 28 22:45 armv7.img
>
> The previous patch proposed by Bin did resolve the error ("hw/sd: Fix 2GiB
> card CSD register values" ):
> https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg07318.html
Correct. The patch above has not been applied yet, and only this patch
is now in mainline, so you will still see errors in the NetBSD 9.0
test.
>
> Although I see that this patch is now in master
> (89c6700fe7eed9195f10055751edbc6d5e7ab940),
> can you please confirm that the issue is still present when testing this on
> your machine as well?
>
Regards,
Bin
