On Tue, Apr 20, 2021 at 10:57 AM LIU Zhiwei <zhiwei_...@c-sky.com> wrote:
>
>
> On 2021/4/20 δΈε7:25, Alistair Francis wrote:
> > On Fri, Apr 9, 2021 at 5:56 PM LIU Zhiwei <zhiwei_...@c-sky.com> wrote:
> >> The Core-Local Interrupt Controller (CLIC) provides low-latency,
> >> vectored, pre-emptive interrupts for RISC-V systems.
> >>
> >> The CLIC also supports a new Selective Hardware Vectoring feature
> >> that allow users to optimize each interrupt for either faster
> >> response or smaller code size.
> >>
> >> Signed-off-by: LIU Zhiwei <zhiwei_...@c-sky.com>
> >> ---
> >> default-configs/devices/riscv32-softmmu.mak | 1 +
> >> default-configs/devices/riscv64-softmmu.mak | 1 +
> >> hw/intc/Kconfig | 3 +
> >> hw/intc/meson.build | 1 +
> >> hw/intc/riscv_clic.c | 835 ++++++++++++++++++++
> >> include/hw/intc/riscv_clic.h | 103 +++
> >> target/riscv/cpu.h | 2 +
> >> 7 files changed, 946 insertions(+)
> >> create mode 100644 hw/intc/riscv_clic.c
> >> create mode 100644 include/hw/intc/riscv_clic.h
> >>
> >> diff --git a/default-configs/devices/riscv32-softmmu.mak
> >> b/default-configs/devices/riscv32-softmmu.mak
> >> index d847bd5692..1430c30588 100644
> >> --- a/default-configs/devices/riscv32-softmmu.mak
> >> +++ b/default-configs/devices/riscv32-softmmu.mak
> >> @@ -5,6 +5,7 @@
> >> #CONFIG_PCI_DEVICES=n
> >> CONFIG_SEMIHOSTING=y
> >> CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> >> +CONFIG_RISCV_CLIC=y
> >>
> >> # Boards:
> >> #
> >> diff --git a/default-configs/devices/riscv64-softmmu.mak
> >> b/default-configs/devices/riscv64-softmmu.mak
> >> index d5eec75f05..396800bbbd 100644
> >> --- a/default-configs/devices/riscv64-softmmu.mak
> >> +++ b/default-configs/devices/riscv64-softmmu.mak
> >> @@ -5,6 +5,7 @@
> >> #CONFIG_PCI_DEVICES=n
> >> CONFIG_SEMIHOSTING=y
> >> CONFIG_ARM_COMPATIBLE_SEMIHOSTING=y
> >> +CONFIG_RISCV_CLIC=y
> >>
> >> # Boards:
> >> #
> >> diff --git a/hw/intc/Kconfig b/hw/intc/Kconfig
> >> index f4694088a4..5bf492b48f 100644
> >> --- a/hw/intc/Kconfig
> >> +++ b/hw/intc/Kconfig
> >> @@ -68,6 +68,9 @@ config SIFIVE_CLINT
> >> config SIFIVE_PLIC
> >> bool
> >>
> >> +config RISCV_CLIC
> >> + bool
> >> +
> >> config GOLDFISH_PIC
> >> bool
> >>
> >> diff --git a/hw/intc/meson.build b/hw/intc/meson.build
> >> index 1c299039f6..2aa71b6738 100644
> >> --- a/hw/intc/meson.build
> >> +++ b/hw/intc/meson.build
> >> @@ -50,6 +50,7 @@ specific_ss.add(when: 'CONFIG_S390_FLIC_KVM', if_true:
> >> files('s390_flic_kvm.c'))
> >> specific_ss.add(when: 'CONFIG_SH_INTC', if_true: files('sh_intc.c'))
> >> specific_ss.add(when: 'CONFIG_SIFIVE_CLINT', if_true:
> >> files('sifive_clint.c'))
> >> specific_ss.add(when: 'CONFIG_SIFIVE_PLIC', if_true:
> >> files('sifive_plic.c'))
> >> +specific_ss.add(when: 'CONFIG_RISCV_CLIC', if_true: files('riscv_clic.c'))
> >> specific_ss.add(when: 'CONFIG_XICS', if_true: files('xics.c'))
> >> specific_ss.add(when: ['CONFIG_KVM', 'CONFIG_XICS'],
> >> if_true: files('xics_kvm.c'))
> >> diff --git a/hw/intc/riscv_clic.c b/hw/intc/riscv_clic.c
> >> new file mode 100644
> >> index 0000000000..8ad534c506
> >> --- /dev/null
> >> +++ b/hw/intc/riscv_clic.c
> >> @@ -0,0 +1,835 @@
> >> +/*
> >> + * RISC-V CLIC(Core Local Interrupt Controller) for QEMU.
> >> + *
> >> + * Copyright (c) 2021 T-Head Semiconductor Co., Ltd. All rights reserved.
> > Shouldn't this maintain the original copyright?
>
> It is OK.
>
> As it has changed a lot from the origin version, it is just another
> device called sifive_clic in my branch, and this is the device called
> riscv_clic.
I can't comment on how much it changed. In your cover letter you say
that it's based on an implementation so I would then guess that this
should keep the copyright if you used that as a starting point.
Alistair
>
> If that is the rule, I am very glad to obey it.
>
> Thanks for pointing it out.
>
> Zhiwei
>
> > Alistair
> >
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify it
> >> + * under the terms and conditions of the GNU General Public License,
> >> + * version 2 or later, as published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope it will be useful, but WITHOUT
> >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> >> for
> >> + * more details.
> >> + *
> >> + * You should have received a copy of the GNU General Public License
> >> along with
> >> + * this program. If not, see <http://www.gnu.org/licenses/>.
> >> + */
> >> +
> >> +#include "qemu/osdep.h"
> >> +#include "qapi/error.h"
> >> +#include "qemu/log.h"
> >> +#include "hw/sysbus.h"
> >> +#include "sysemu/qtest.h"
> >> +#include "target/riscv/cpu.h"
> >> +#include "hw/qdev-properties.h"
> >> +#include "hw/intc/riscv_clic.h"
> >> +
> >> +/*
> >> + * The 2-bit trig WARL field specifies the trigger type and polarity for
> >> each
> >> + * interrupt input. Bit 1, trig[0], is defined as "edge-triggered"
> >> + * (0: level-triggered, 1: edge-triggered); while bit 2, trig[1], is
> >> defined as
> >> + * "negative-edge" (0: positive-edge, 1: negative-edge). (Section 3.6)
> >> + */
> >> +
> >> +static inline TRIG_TYPE
> >> +riscv_clic_get_trigger_type(RISCVCLICState *clic, size_t irq_offset)
> >> +{
> >> + return (clic->clicintattr[irq_offset] >> 1) & 0x3;
> >> +}
> >> +
> >> +static inline bool
> >> +riscv_clic_is_edge_triggered(RISCVCLICState *clic, size_t irq_offset)
> >> +{
> >> + return (clic->clicintattr[irq_offset] >> 1) & 0x1;
> >> +}
> >> +
> >> +static inline bool
> >> +riscv_clic_is_shv_interrupt(RISCVCLICState *clic, size_t irq_offset)
> >> +{
> >> + return (clic->clicintattr[irq_offset] & 0x1) && clic->nvbits;
> >> +}
> >> +
> >> +static uint8_t
> >> +riscv_clic_get_interrupt_level(RISCVCLICState *clic, uint8_t intctl)
> >> +{
> >> + int nlbits = clic->nlbits;
> >> +
> >> + uint8_t mask_il = ((1 << nlbits) - 1) << (8 - nlbits);
> >> + uint8_t mask_padding = (1 << (8 - nlbits)) - 1;
> >> + /* unused level bits are set to 1 */
> >> + return (intctl & mask_il) | mask_padding;
> >> +}
> >> +
> >> +static uint8_t
> >> +riscv_clic_get_interrupt_priority(RISCVCLICState *clic, uint8_t intctl)
> >> +{
> >> + int npbits = clic->clicintctlbits - clic->nlbits;
> >> + uint8_t mask_priority = ((1 << npbits) - 1) << (8 - npbits);
> >> + uint8_t mask_padding = (1 << (8 - npbits)) - 1;
> >> +
> >> + if (npbits < 0) {
> >> + return UINT8_MAX;
> >> + }
> >> + /* unused priority bits are set to 1 */
> >> + return (intctl & mask_priority) | mask_padding;
> >> +}
> >> +
> >> +static void
> >> +riscv_clic_intcfg_decode(RISCVCLICState *clic, uint16_t intcfg,
> >> + uint8_t *mode, uint8_t *level,
> >> + uint8_t *priority)
> >> +{
> >> + *mode = intcfg >> 8;
> >> + *level = riscv_clic_get_interrupt_level(clic, intcfg & 0xff);
> >> + *priority = riscv_clic_get_interrupt_priority(clic, intcfg & 0xff);
> >> +}
> >> +
> >> +/*
> >> + * In a system with multiple harts, the M-mode CLIC regions for all the
> >> harts
> >> + * are placed contiguously in the memory space, followed by the S-mode
> >> CLIC
> >> + * regions for all harts. (Section 3.11)
> >> + */
> >> +static size_t
> >> +riscv_clic_get_irq_offset(RISCVCLICState *clic, int mode, int hartid, int
> >> irq)
> >> +{
> >> + size_t mode_offset = 0;
> >> + size_t unit = clic->num_harts * clic->num_sources;
> >> +
> >> + switch (mode) {
> >> + case PRV_M:
> >> + mode_offset = 0;
> >> + break;
> >> + case PRV_S:
> >> + mode_offset = unit;
> >> + break;
> >> + case PRV_U:
> >> + mode_offset = clic->prv_s ? 2 * unit : unit;
> >> + break;
> >> + default:
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid mode %d\n", mode);
> >> + exit(1);
> >> + }
> >> + return mode_offset + hartid * clic->num_sources + irq;
> >> +}
> >> +
> >> +static void riscv_clic_next_interrupt(void *opaque, int hartid)
> >> +{
> >> + /*
> >> + * Scan active list for highest priority pending interrupts
> >> + * comparing against this harts mintstatus register and interrupt
> >> + * the core if we have a higher priority interrupt to deliver
> >> + */
> >> + RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(hartid));
> >> + CPURISCVState *env = &cpu->env;
> >> + RISCVCLICState *clic = (RISCVCLICState *)opaque;
> >> +
> >> + int il[4] = {
> >> + MAX(get_field(env->mintstatus, MINTSTATUS_UIL),
> >> + clic->mintthresh), /* PRV_U */
> >> + MAX(get_field(env->mintstatus, MINTSTATUS_SIL),
> >> + clic->sintthresh), /* PRV_S */
> >> + 0, /* reserverd */
> >> + MAX(get_field(env->mintstatus, MINTSTATUS_MIL),
> >> + clic->uintthresh) /* PRV_M */
> >> + };
> >> +
> >> + /* Get sorted list of enabled interrupts for this hart */
> >> + size_t hart_offset = hartid * clic->num_sources;
> >> + CLICActiveInterrupt *active = &clic->active_list[hart_offset];
> >> + size_t active_count = clic->active_count[hartid];
> >> + uint8_t mode, level, priority;
> >> +
> >> + /* Loop through the enabled interrupts sorted by mode+priority+level
> >> */
> >> + while (active_count) {
> >> + size_t irq_offset;
> >> + riscv_clic_intcfg_decode(clic, active->intcfg, &mode, &level,
> >> + &priority);
> >> + if (mode < env->priv || (mode == env->priv && level <= il[mode]))
> >> {
> >> + /*
> >> + * No pending interrupts with high enough mode+priority+level
> >> + * break and clear pending interrupt for this hart
> >> + */
> >> + break;
> >> + }
> >> + irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> active->irq);
> >> + /* Check pending interrupt with high enough mode+priority+level */
> >> + if (clic->clicintip[irq_offset]) {
> >> + /* Clean vector edge-triggered pending */
> >> + if (riscv_clic_is_edge_triggered(clic, irq_offset) &&
> >> + riscv_clic_is_shv_interrupt(clic, irq_offset)) {
> >> + clic->clicintip[irq_offset] = 0;
> >> + }
> >> + /* Post pending interrupt for this hart */
> >> + clic->exccode[hartid] = active->irq | mode << 12 | level <<
> >> 14;
> >> + qemu_set_irq(clic->cpu_irqs[hartid], 1);
> >> + return;
> >> + }
> >> + /* Check next enabled interrupt */
> >> + active_count--;
> >> + active++;
> >> + }
> >> +}
> >> +
> >> +/*
> >> + * Any interrupt i that is not accessible to S-mode or U-Mode
> >> + * appears as hard-wired zeros in clicintip[i], clicintie[i],
> >> + * clicintattr[i], and clicintctl[i].(Section 3.9)(Section 3.10)
> >> + */
> >> +static bool
> >> +riscv_clic_check_visible(RISCVCLICState *clic, int mode, int hartid, int
> >> irq)
> >> +{
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + if (!clic->prv_s && !clic->prv_u) { /* M */
> >> + return mode == PRV_M;
> >> + } else if (!clic->prv_s) { /* M/U */
> >> + switch (clic->nmbits) {
> >> + case 0:
> >> + return mode == PRV_M;
> >> + case 1:
> >> + return clic->clicintattr[irq_offset] & 0x80 ? (mode == PRV_M)
> >> :
> >> + (mode == PRV_U);
> >> + default:
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: nmbits can only be 0 or 1 for M/U hart");
> >> + exit(1);
> >> + }
> >> + } else { /* M/S/U */
> >> + switch (clic->nmbits) {
> >> + case 0:
> >> + return mode == PRV_M;
> >> + case 1:
> >> + return clic->clicintattr[irq_offset] & 0x80 ? (mode == PRV_M)
> >> :
> >> + (mode == PRV_S);
> >> + case 2:
> >> + return mode == clic->clicintattr[irq_offset];
> >> + case 3:
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: nmbits can only be 0 or 1 or 2 for M/S/U hart");
> >> + exit(1);
> >> + }
> >> + }
> >> + return false;
> >> +}
> >> +
> >> +/*
> >> + * For level-triggered interrupts, software writes to pending bits are
> >> + * ignored completely. (Section 3.4)
> >> + */
> >> +static bool
> >> +riscv_clic_validate_intip(RISCVCLICState *clic, int mode, int hartid, int
> >> irq)
> >> +{
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + return riscv_clic_is_edge_triggered(clic, irq_offset);
> >> +}
> >> +
> >> +static void
> >> +riscv_clic_update_intip(RISCVCLICState *clic, int mode, int hartid,
> >> + int irq, uint64_t value)
> >> +{
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + clic->clicintip[irq_offset] = !!value;
> >> + riscv_clic_next_interrupt(clic, hartid);
> >> +}
> >> +
> >> +/*
> >> + * For security purpose, the field can only be set to a privilege
> >> + * level that is equal mode to or lower than the currently running
> >> + * privilege level.(Section 3.6)
> >> + */
> >> +
> >> +static bool riscv_clic_validate_intattr(RISCVCLICState *clic, uint64_t
> >> value)
> >> +{
> >> + int mode = extract64(value, 6, 2);
> >> +
> >> + if (!qtest_enabled()) {
> >> + CPURISCVState *env = current_cpu->env_ptr;
> >> + if (env->priv < mode) {
> >> + return false;
> >> + }
> >> + }
> >> + return true;
> >> +}
> >> +
> >> +static inline int riscv_clic_encode_priority(const CLICActiveInterrupt *i)
> >> +{
> >> + return ((i->intcfg & 0x3ff) << 12) | /* Highest mode+level+priority */
> >> + (i->irq & 0xfff); /* Highest irq number */
> >> +}
> >> +
> >> +static int riscv_clic_active_compare(const void *a, const void *b)
> >> +{
> >> + return riscv_clic_encode_priority(b) - riscv_clic_encode_priority(a);
> >> +}
> >> +
> >> +static void
> >> +riscv_clic_update_intie(RISCVCLICState *clic, int mode, int hartid,
> >> + int irq, uint64_t new_intie)
> >> +{
> >> + size_t hart_offset = hartid * clic->num_sources;
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + CLICActiveInterrupt *active_list = &clic->active_list[hart_offset];
> >> + size_t *active_count = &clic->active_count[hartid];
> >> +
> >> + uint8_t old_intie = clic->clicintie[irq_offset];
> >> + clic->clicintie[irq_offset] = !!new_intie;
> >> +
> >> + /* Add to or remove from list of active interrupts */
> >> + if (new_intie && !old_intie) {
> >> + active_list[*active_count].intcfg = (mode << 8) |
> >> + clic->clicintctl[irq_offset];
> >> + active_list[*active_count].irq = irq;
> >> + (*active_count)++;
> >> + } else if (!new_intie && old_intie) {
> >> + CLICActiveInterrupt key = {
> >> + (mode << 8) | clic->clicintctl[irq_offset], irq
> >> + };
> >> + CLICActiveInterrupt *result = bsearch(&key,
> >> + active_list, *active_count,
> >> + sizeof(CLICActiveInterrupt),
> >> + riscv_clic_active_compare);
> >> + size_t elem = (result - active_list) /
> >> sizeof(CLICActiveInterrupt);
> >> + size_t sz = (--(*active_count) - elem) *
> >> sizeof(CLICActiveInterrupt);
> >> + assert(result);
> >> + memmove(&result[0], &result[1], sz);
> >> + }
> >> +
> >> + /* Sort list of active interrupts */
> >> + qsort(active_list, *active_count,
> >> + sizeof(CLICActiveInterrupt),
> >> + riscv_clic_active_compare);
> >> +
> >> + riscv_clic_next_interrupt(clic, hartid);
> >> +}
> >> +
> >> +static void
> >> +riscv_clic_hart_write(RISCVCLICState *clic, hwaddr addr,
> >> + uint64_t value, unsigned size,
> >> + int mode, int hartid, int irq)
> >> +{
> >> + int req = extract32(addr, 0, 2);
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> +
> >> + if (hartid >= clic->num_harts) {
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid hartid %u: 0x%" HWADDR_PRIx "\n",
> >> + hartid, addr);
> >> + return;
> >> + }
> >> +
> >> + if (irq >= clic->num_sources) {
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid irq %u: 0x%" HWADDR_PRIx "\n", irq,
> >> addr);
> >> + return;
> >> + }
> >> +
> >> + switch (req) {
> >> + case 0: /* clicintip[i] */
> >> + if (riscv_clic_validate_intip(clic, mode, hartid, irq)) {
> >> + /*
> >> + * The actual pending bit is located at bit 0 (i.e., the
> >> + * leastsignificant bit). In case future extensions expand
> >> the bit
> >> + * field, from FW perspective clicintip[i]=zero means no
> >> interrupt
> >> + * pending, and clicintip[i]!=0 (not just 1) indicates an
> >> + * interrupt is pending. (Section 3.4)
> >> + */
> >> + if (value != clic->clicintip[irq_offset]) {
> >> + riscv_clic_update_intip(clic, mode, hartid, irq, value);
> >> + }
> >> + }
> >> + break;
> >> + case 1: /* clicintie[i] */
> >> + if (clic->clicintie[irq_offset] != value) {
> >> + riscv_clic_update_intie(clic, mode, hartid, irq, value);
> >> + }
> >> + break;
> >> + case 2: /* clicintattr[i] */
> >> + if (riscv_clic_validate_intattr(clic, value)) {
> >> + if (clic->clicintattr[irq_offset] != value) {
> >> + /* When nmbits=2, check WARL */
> >> + bool invalid = (clic->nmbits == 2) &&
> >> + (extract64(value, 6, 2) == 0b10);
> >> + if (invalid) {
> >> + uint8_t old_mode =
> >> extract32(clic->clicintattr[irq_offset],
> >> + 6, 2);
> >> + value = deposit32(value, 6, 2, old_mode);
> >> + }
> >> + clic->clicintattr[irq_offset] = value;
> >> + riscv_clic_next_interrupt(clic, hartid);
> >> + }
> >> + }
> >> + break;
> >> + case 3: /* clicintctl[i] */
> >> + if (value != clic->clicintctl[irq_offset]) {
> >> + clic->clicintctl[irq_offset] = value;
> >> + riscv_clic_next_interrupt(clic, hartid);
> >> + }
> >> + break;
> >> + }
> >> +}
> >> +
> >> +static uint64_t
> >> +riscv_clic_hart_read(RISCVCLICState *clic, hwaddr addr, int mode,
> >> + int hartid, int irq)
> >> +{
> >> + int req = extract32(addr, 0, 2);
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> +
> >> + if (hartid >= clic->num_harts) {
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid hartid %u: 0x%" HWADDR_PRIx "\n",
> >> + hartid, addr);
> >> + return 0;
> >> + }
> >> +
> >> + if (irq >= clic->num_sources) {
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid irq %u: 0x%" HWADDR_PRIx "\n", irq,
> >> addr);
> >> + return 0;
> >> + }
> >> +
> >> + switch (req) {
> >> + case 0: /* clicintip[i] */
> >> + return clic->clicintip[irq_offset];
> >> + case 1: /* clicintie[i] */
> >> + return clic->clicintie[irq_offset];
> >> + case 2: /* clicintattr[i] */
> >> + /*
> >> + * clicintattr register layout
> >> + * Bits Field
> >> + * 7:6 mode
> >> + * 5:3 reserved (WPRI 0)
> >> + * 2:1 trig
> >> + * 0 shv
> >> + */
> >> + return clic->clicintattr[irq_offset] & ~0x38;
> >> + case 3: /* clicintctrl */
> >> + /*
> >> + * The implemented bits are kept left-justified in the
> >> most-significant
> >> + * bits of each 8-bit clicintctl[i] register, with the lower
> >> + * unimplemented bits treated as hardwired to 1.(Section 3.7)
> >> + */
> >> + return clic->clicintctl[irq_offset] |
> >> + ((1 << (8 - clic->clicintctlbits)) - 1);
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +/* Return target interrupt mode */
> >> +static int riscv_clic_get_mode(RISCVCLICState *clic, hwaddr addr)
> >> +{
> >> + int mode = addr / (4 * clic->num_harts * clic->num_sources);
> >> + switch (mode) {
> >> + case 0:
> >> + return PRV_M;
> >> + case 1:
> >> + assert(clic->prv_s || clic->prv_u);
> >> + return clic->prv_s ? PRV_S : PRV_U;
> >> + case 2:
> >> + assert(clic->prv_s && clic->prv_u);
> >> + return PRV_U;
> >> + default:
> >> + g_assert_not_reached();
> >> + break;
> >> + }
> >> +}
> >> +
> >> +/* Return target hart id */
> >> +static int riscv_clic_get_hartid(RISCVCLICState *clic, hwaddr addr)
> >> +{
> >> + int mode_unit = 4 * clic->num_harts * clic->num_sources;
> >> + int hart_unit = 4 * clic->num_sources;
> >> +
> >> + return (addr % mode_unit) / hart_unit;
> >> +}
> >> +
> >> +/* Return target interrupt number */
> >> +static int riscv_clic_get_irq(RISCVCLICState *clic, hwaddr addr)
> >> +{
> >> + int hart_unit = 4 * clic->num_sources;
> >> + return (addr % hart_unit) / 4;
> >> +}
> >> +
> >> +static void
> >> +riscv_clic_write(void *opaque, hwaddr addr, uint64_t value, unsigned size)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + hwaddr clic_size = clic->clic_size;
> >> + int hartid, mode, irq;
> >> +
> >> + if (addr < clic_size) {
> >> + if (addr < 0x1000) {
> >> + assert(addr % 4 == 0);
> >> + int index = addr / 4;
> >> + switch (index) {
> >> + case 0: /* cliccfg */
> >> + {
> >> + uint8_t nlbits = extract32(value, 1, 4);
> >> + uint8_t nmbits = extract32(value, 5, 2);
> >> +
> >> + /*
> >> + * The 4-bit cliccfg.nlbits WARL field.
> >> + * Valid values are 0β8.
> >> + */
> >> + if (nlbits <= 8) {
> >> + clic->nlbits = nlbits;
> >> + }
> >> + /* Valid values are given by implemented priviledges
> >> */
> >> + if (clic->prv_s && clic->prv_u) {
> >> + if (nmbits <= 2) {
> >> + clic->nmbits = nmbits;
> >> + }
> >> + } else if (clic->prv_u) {
> >> + if (nmbits <= 1) {
> >> + clic->nmbits = nmbits;
> >> + }
> >> + } else {
> >> + assert(!clic->prv_s);
> >> + if (nmbits == 0) {
> >> + clic->nmbits = 0;
> >> + }
> >> + }
> >> + clic->nvbits = extract32(value, 0, 1);
> >> + break;
> >> + }
> >> + case 1: /* clicinfo, read-only register */
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: write read-only clicinfo.\n");
> >> + break;
> >> + case 0x10 ... 0x2F: /* clicinttrig */
> >> + {
> >> + uint32_t interrupt_number = value &
> >> MAKE_64BIT_MASK(0, 13);
> >> + if (interrupt_number <= clic->num_sources) {
> >> + value &= ~MAKE_64BIT_MASK(13, 18);
> >> + clic->clicinttrig[index - 0x10] = value;
> >> + }
> >> + break;
> >> + }
> >> + case 2: /* mintthresh */
> >> + if (!strcmp(clic->version, "v0.8")) {
> >> + clic->mintthresh = value;
> >> + break;
> >> + }
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid write addr: 0x%" HWADDR_PRIx
> >> "\n",
> >> + addr);
> >> + break;
> >> + default:
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid write addr: 0x%" HWADDR_PRIx
> >> "\n",
> >> + addr);
> >> + return;
> >> + }
> >> + } else {
> >> + addr -= 0x1000;
> >> + hartid = riscv_clic_get_hartid(clic, addr);
> >> + mode = riscv_clic_get_mode(clic, addr);
> >> + irq = riscv_clic_get_irq(clic, addr);
> >> +
> >> + if (riscv_clic_check_visible(clic, mode, hartid, irq)) {
> >> + riscv_clic_hart_write(clic, addr, value, size, mode,
> >> + hartid, irq);
> >> + }
> >> + }
> >> + } else {
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid write: 0x%" HWADDR_PRIx "\n", addr);
> >> + }
> >> +}
> >> +
> >> +static uint64_t riscv_clic_read(void *opaque, hwaddr addr, unsigned size)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + hwaddr clic_size = clic->clic_size;
> >> + int hartid, mode, irq;
> >> +
> >> + if (addr < clic_size) {
> >> + if (addr < 0x1000) {
> >> + assert(addr % 4 == 0);
> >> + int index = addr / 4;
> >> + switch (index) {
> >> + case 0: /* cliccfg */
> >> + return clic->nvbits |
> >> + (clic->nlbits << 1) |
> >> + (clic->nmbits << 5);
> >> + case 1: /* clicinfo */
> >> + /*
> >> + * clicinfo register layout
> >> + *
> >> + * Bits Field
> >> + * 31 reserved (WARL 0)
> >> + * 30:25 num_trigger
> >> + * 24:21 CLICINTCTLBITS
> >> + * 20:13 version (for version control)
> >> + * 12:0 num_interrupt
> >> + */
> >> + return clic->clicinfo & ~INT32_MAX;
> >> + case 0x10 ... 0x2F: /* clicinttrig */
> >> + /*
> >> + * clicinttrig register layout
> >> + *
> >> + * Bits Field
> >> + * 31 enable
> >> + * 30:13 reserved (WARL 0)
> >> + * 12:0 interrupt_number
> >> + */
> >> + return clic->clicinttrig[index - 0x10] &
> >> + ~MAKE_64BIT_MASK(13, 18);
> >> + case 2: /* mintthresh */
> >> + if (!strcmp(clic->version, "v0.8")) {
> >> + return clic->mintthresh;
> >> + break;
> >> + }
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid read : 0x%" HWADDR_PRIx "\n",
> >> + addr);
> >> + break;
> >> + default:
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid read : 0x%" HWADDR_PRIx "\n",
> >> + addr);
> >> + break;
> >> + }
> >> + } else {
> >> + addr -= 0x1000;
> >> + hartid = riscv_clic_get_hartid(clic, addr);
> >> + mode = riscv_clic_get_mode(clic, addr);
> >> + irq = riscv_clic_get_irq(clic, addr);
> >> +
> >> + if (riscv_clic_check_visible(clic, mode, hartid, irq)) {
> >> + return riscv_clic_hart_read(clic, addr, mode, hartid,
> >> irq);
> >> + }
> >> + }
> >> + } else {
> >> + qemu_log_mask(LOG_GUEST_ERROR,
> >> + "clic: invalid read: 0x%" HWADDR_PRIx "\n", addr);
> >> + }
> >> + return 0;
> >> +}
> >> +
> >> +static void riscv_clic_set_irq(void *opaque, int id, int level)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + int irq, hartid, mode;
> >> + hwaddr addr = 4 * id;
> >> + TRIG_TYPE type;
> >> +
> >> + hartid = riscv_clic_get_hartid(clic, addr);
> >> + mode = riscv_clic_get_mode(clic, addr);
> >> + irq = riscv_clic_get_irq(clic, addr);
> >> + type = riscv_clic_get_trigger_type(clic, id);
> >> +
> >> + /*
> >> + * In general, the edge-triggered interrupt state should be kept in
> >> pending
> >> + * bit, while the level-triggered interrupt should be kept in the
> >> level
> >> + * state of the incoming wire.
> >> + *
> >> + * For CLIC, model the level-triggered interrupt by read-only pending
> >> bit.
> >> + */
> >> + if (level) {
> >> + switch (type) {
> >> + case POSITIVE_LEVEL:
> >> + case POSITIVE_EDGE:
> >> + riscv_clic_update_intip(clic, mode, hartid, irq, level);
> >> + break;
> >> + case NEG_LEVEL:
> >> + riscv_clic_update_intip(clic, mode, hartid, irq, !level);
> >> + break;
> >> + case NEG_EDGE:
> >> + break;
> >> + }
> >> + } else {
> >> + switch (type) {
> >> + case POSITIVE_LEVEL:
> >> + riscv_clic_update_intip(clic, mode, hartid, irq, level);
> >> + break;
> >> + case POSITIVE_EDGE:
> >> + break;
> >> + case NEG_LEVEL:
> >> + case NEG_EDGE:
> >> + riscv_clic_update_intip(clic, mode, hartid, irq, !level);
> >> + break;
> >> + }
> >> + }
> >> +}
> >> +
> >> +static void riscv_clic_cpu_irq_handler(void *opaque, int irq, int level)
> >> +{
> >> + CPURISCVState *env = (CPURISCVState *)opaque;
> >> + RISCVCLICState *clic = env->clic;
> >> + CPUState *cpu = env_cpu(env);
> >> +
> >> + if (level) {
> >> + env->exccode = clic->exccode[cpu->cpu_index];
> >> + cpu_interrupt(env_cpu(env), CPU_INTERRUPT_CLIC);
> >> + }
> >> +}
> >> +
> >> +static const MemoryRegionOps riscv_clic_ops = {
> >> + .read = riscv_clic_read,
> >> + .write = riscv_clic_write,
> >> + .endianness = DEVICE_LITTLE_ENDIAN,
> >> + .valid = {
> >> + .min_access_size = 1,
> >> + .max_access_size = 8
> >> + }
> >> +};
> >> +
> >> +static void riscv_clic_realize(DeviceState *dev, Error **errp)
> >> +{
> >> + RISCVCLICState *clic = RISCV_CLIC(dev);
> >> + size_t harts_x_sources = clic->num_harts * clic->num_sources;
> >> + int irqs, i;
> >> +
> >> + if (clic->prv_s && clic->prv_u) {
> >> + irqs = 3 * harts_x_sources;
> >> + } else if (clic->prv_s || clic->prv_u) {
> >> + irqs = 2 * harts_x_sources;
> >> + } else {
> >> + irqs = harts_x_sources;
> >> + }
> >> +
> >> + clic->clic_size = irqs * 4 + 0x1000;
> >> + memory_region_init_io(&clic->mmio, OBJECT(dev), &riscv_clic_ops, clic,
> >> + TYPE_RISCV_CLIC, clic->clic_size);
> >> +
> >> + clic->clicintip = g_new0(uint8_t, irqs);
> >> + clic->clicintie = g_new0(uint8_t, irqs);
> >> + clic->clicintattr = g_new0(uint8_t, irqs);
> >> + clic->clicintctl = g_new0(uint8_t, irqs);
> >> + clic->active_list = g_new0(CLICActiveInterrupt, irqs);
> >> + clic->active_count = g_new0(size_t, clic->num_harts);
> >> + clic->exccode = g_new0(uint32_t, clic->num_harts);
> >> + clic->cpu_irqs = g_new0(qemu_irq, clic->num_harts);
> >> + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &clic->mmio);
> >> +
> >> + /* Allocate irq through gpio, so that we can use qtest */
> >> + qdev_init_gpio_in(dev, riscv_clic_set_irq, irqs);
> >> + qdev_init_gpio_out(dev, clic->cpu_irqs, clic->num_harts);
> >> +
> >> + for (i = 0; i < clic->num_harts; i++) {
> >> + RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(i));
> >> + qemu_irq irq = qemu_allocate_irq(riscv_clic_cpu_irq_handler,
> >> + &cpu->env, 1);
> >> + qdev_connect_gpio_out(dev, i, irq);
> >> + cpu->env.clic = clic;
> >> + }
> >> +}
> >> +
> >> +static Property riscv_clic_properties[] = {
> >> + DEFINE_PROP_BOOL("prv-s", RISCVCLICState, prv_s, false),
> >> + DEFINE_PROP_BOOL("prv-u", RISCVCLICState, prv_u, false),
> >> + DEFINE_PROP_UINT32("num-harts", RISCVCLICState, num_harts, 0),
> >> + DEFINE_PROP_UINT32("num-sources", RISCVCLICState, num_sources, 0),
> >> + DEFINE_PROP_UINT32("clicintctlbits", RISCVCLICState, clicintctlbits,
> >> 0),
> >> + DEFINE_PROP_UINT64("mclicbase", RISCVCLICState, mclicbase, 0),
> >> + DEFINE_PROP_STRING("version", RISCVCLICState, version),
> >> + DEFINE_PROP_END_OF_LIST(),
> >> +};
> >> +
> >> +static void riscv_clic_class_init(ObjectClass *klass, void *data)
> >> +{
> >> + DeviceClass *dc = DEVICE_CLASS(klass);
> >> +
> >> + dc->realize = riscv_clic_realize;
> >> + device_class_set_props(dc, riscv_clic_properties);
> >> +}
> >> +
> >> +static const TypeInfo riscv_clic_info = {
> >> + .name = TYPE_RISCV_CLIC,
> >> + .parent = TYPE_SYS_BUS_DEVICE,
> >> + .instance_size = sizeof(RISCVCLICState),
> >> + .class_init = riscv_clic_class_init,
> >> +};
> >> +
> >> +static void riscv_clic_register_types(void)
> >> +{
> >> + type_register_static(&riscv_clic_info);
> >> +}
> >> +
> >> +type_init(riscv_clic_register_types)
> >> +
> >> +/*
> >> + * riscv_clic_create:
> >> + *
> >> + * @addr: base address of M-Mode CLIC memory-mapped registers
> >> + * @prv_s: have smode region
> >> + * @prv_u: have umode region
> >> + * @num_harts: number of CPU harts
> >> + * @num_sources: number of interrupts supporting by each aperture
> >> + * @clicintctlbits: bits are actually implemented in the clicintctl
> >> registers
> >> + * @version: clic version, such as "v0.9"
> >> + *
> >> + * Returns: the device object
> >> + */
> >> +DeviceState *riscv_clic_create(hwaddr addr, bool prv_s, bool prv_u,
> >> + uint32_t num_harts, uint32_t num_sources,
> >> + uint8_t clicintctlbits,
> >> + const char *version)
> >> +{
> >> + DeviceState *dev = qdev_new(TYPE_RISCV_CLIC);
> >> +
> >> + assert(num_sources <= 4096);
> >> + assert(num_harts <= 1024);
> >> + assert(clicintctlbits <= 8);
> >> + assert(!strcmp(version, "v0.8") || !strcmp(version, "v0.9"));
> >> +
> >> + qdev_prop_set_bit(dev, "prv-s", prv_s);
> >> + qdev_prop_set_bit(dev, "prv-u", prv_u);
> >> + qdev_prop_set_uint32(dev, "num-harts", num_harts);
> >> + qdev_prop_set_uint32(dev, "num-sources", num_sources);
> >> + qdev_prop_set_uint32(dev, "clicintctlbits", clicintctlbits);
> >> + qdev_prop_set_uint64(dev, "mclicbase", addr);
> >> + qdev_prop_set_string(dev, "version", version);
> >> +
> >> + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
> >> + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
> >> + return dev;
> >> +}
> >> +
> >> +void riscv_clic_get_next_interrupt(void *opaque, int hartid)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + riscv_clic_next_interrupt(clic, hartid);
> >> +}
> >> +
> >> +bool riscv_clic_shv_interrupt(void *opaque, int mode, int hartid, int irq)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + return riscv_clic_is_shv_interrupt(clic, irq_offset);
> >> +}
> >> +
> >> +bool riscv_clic_edge_triggered(void *opaque, int mode, int hartid, int
> >> irq)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + return riscv_clic_is_edge_triggered(clic, irq_offset);
> >> +}
> >> +
> >> +void riscv_clic_clean_pending(void *opaque, int mode, int hartid, int irq)
> >> +{
> >> + RISCVCLICState *clic = opaque;
> >> + size_t irq_offset = riscv_clic_get_irq_offset(clic, mode, hartid,
> >> irq);
> >> + clic->clicintip[irq_offset] = 0;
> >> +}
> >> +
> >> +/*
> >> + * The new CLIC interrupt-handling mode is encoded as a new state in
> >> + * the existing WARL xtvec register, where the low two bits of are 11.
> >> + */
> >> +bool riscv_clic_is_clic_mode(CPURISCVState *env)
> >> +{
> >> + target_ulong xtvec = (env->priv == PRV_M) ? env->mtvec : env->stvec;
> >> + return env->clic && ((xtvec & 0x3) == 3);
> >> +}
> >> +
> >> +void riscv_clic_decode_exccode(uint32_t exccode, int *mode,
> >> + int *il, int *irq)
> >> +{
> >> + *irq = extract32(exccode, 0, 12);
> >> + *mode = extract32(exccode, 12, 2);
> >> + *il = extract32(exccode, 14, 8);
> >> +}
> >> diff --git a/include/hw/intc/riscv_clic.h b/include/hw/intc/riscv_clic.h
> >> new file mode 100644
> >> index 0000000000..e5f89672a6
> >> --- /dev/null
> >> +++ b/include/hw/intc/riscv_clic.h
> >> @@ -0,0 +1,103 @@
> >> +/*
> >> + * RISC-V CLIC(Core Local Interrupt Controller) interface.
> >> + *
> >> + * Copyright (c) 2021 T-Head Semiconductor Co., Ltd. All rights reserved.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify it
> >> + * under the terms and conditions of the GNU General Public License,
> >> + * version 2 or later, as published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope it will be useful, but WITHOUT
> >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> >> for
> >> + * more details.
> >> + *
> >> + * You should have received a copy of the GNU General Public License
> >> along with
> >> + * this program. If not, see <http://www.gnu.org/licenses/>.
> >> + */
> >> +
> >> +#ifndef RISCV_CLIC_H
> >> +#define RISCV_CLIC_H
> >> +
> >> +#include "hw/irq.h"
> >> +#include "hw/sysbus.h"
> >> +
> >> +#define TYPE_RISCV_CLIC "riscv_clic"
> >> +#define RISCV_CLIC(obj) \
> >> + OBJECT_CHECK(RISCVCLICState, (obj), TYPE_RISCV_CLIC)
> >> +
> >> +/*
> >> + * CLIC per hart active interrupts
> >> + *
> >> + * We maintain per hart lists of enabled interrupts sorted by
> >> + * mode+level+priority. The sorting is done on the configuration path
> >> + * so that the interrupt delivery fastpath can linear scan enabled
> >> + * interrupts in priority order.
> >> + */
> >> +typedef struct CLICActiveInterrupt {
> >> + uint16_t intcfg;
> >> + uint16_t irq;
> >> +} CLICActiveInterrupt;
> >> +
> >> +typedef enum TRIG_TYPE {
> >> + POSITIVE_LEVEL,
> >> + POSITIVE_EDGE,
> >> + NEG_LEVEL,
> >> + NEG_EDGE,
> >> +} TRIG_TYPE;
> >> +
> >> +typedef struct RISCVCLICState {
> >> + /*< private >*/
> >> + SysBusDevice parent_obj;
> >> +
> >> + /*< public >*/
> >> +
> >> + /* Implementaion parameters */
> >> + bool prv_s;
> >> + bool prv_u;
> >> + uint32_t num_harts;
> >> + uint32_t num_sources;
> >> + uint32_t clic_size;
> >> + uint32_t clic_mmode_base;
> >> + uint32_t clicintctlbits;
> >> + uint64_t mclicbase;
> >> + char *version;
> >> +
> >> + /* Global configuration */
> >> + uint8_t nmbits;
> >> + uint8_t nlbits;
> >> + uint8_t nvbits;
> >> + uint32_t clicinfo;
> >> + uint32_t clicinttrig[32];
> >> +
> >> + /* Aperture configuration */
> >> + uint8_t *clicintip;
> >> + uint8_t *clicintie;
> >> + uint8_t *clicintattr;
> >> + uint8_t *clicintctl;
> >> +
> >> + /* Complatible with v0.8 */
> >> + uint32_t mintthresh;
> >> + uint32_t sintthresh;
> >> + uint32_t uintthresh;
> >> +
> >> + /* QEMU implementaion related fields */
> >> + uint32_t *exccode;
> >> + CLICActiveInterrupt *active_list;
> >> + size_t *active_count;
> >> + MemoryRegion mmio;
> >> + qemu_irq *cpu_irqs;
> >> +} RISCVCLICState;
> >> +
> >> +DeviceState *riscv_clic_create(hwaddr addr, bool prv_s, bool prv_u,
> >> + uint32_t num_harts, uint32_t num_sources,
> >> + uint8_t clicintctlbits,
> >> + const char *version);
> >> +
> >> +void riscv_clic_decode_exccode(uint32_t exccode, int *mode, int *il, int
> >> *irq);
> >> +void riscv_clic_clean_pending(void *opaque, int mode, int hartid, int
> >> irq);
> >> +bool riscv_clic_edge_triggered(void *opaque, int mode, int hartid, int
> >> irq);
> >> +bool riscv_clic_shv_interrupt(void *opaque, int mode, int hartid, int
> >> irq);
> >> +void riscv_clic_get_next_interrupt(void *opaque, int hartid);
> >> +bool riscv_clic_is_clic_mode(CPURISCVState *env);
> >> +#endif
> >> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> >> index a5eab26a69..9e389d7bbf 100644
> >> --- a/target/riscv/cpu.h
> >> +++ b/target/riscv/cpu.h
> >> @@ -33,6 +33,7 @@
> >> #define RISCV_CPU_TYPE_SUFFIX "-" TYPE_RISCV_CPU
> >> #define RISCV_CPU_TYPE_NAME(name) (name RISCV_CPU_TYPE_SUFFIX)
> >> #define CPU_RESOLVING_TYPE TYPE_RISCV_CPU
> >> +#define CPU_INTERRUPT_CLIC CPU_INTERRUPT_TGT_EXT_0
> >>
> >> #define TYPE_RISCV_CPU_ANY RISCV_CPU_TYPE_NAME("any")
> >> #define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32")
> >> @@ -247,6 +248,7 @@ struct CPURISCVState {
> >> /* Fields from here on are preserved across CPU reset. */
> >> QEMUTimer *timer; /* Internal timer */
> >> void *clic; /* clic interrupt controller */
> >> + uint32_t exccode; /* clic irq encode */
> >> };
> >>
> >> OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
> >> --
> >> 2.25.1
> >>
> >>
