On 9/16/21 12:05, Mark Cave-Ayland wrote:
> Nubus IRQs are routed to the CPU through the VIA2 device so wire up the IRQs
> using gpios accordingly.
>
> Signed-off-by: Mark Cave-Ayland <mark.cave-ayl...@ilande.co.uk>
> ---
> hw/m68k/q800.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/hw/m68k/q800.c b/hw/m68k/q800.c
> index e34df1a829..fbc45a301f 100644
> --- a/hw/m68k/q800.c
> +++ b/hw/m68k/q800.c
> @@ -396,6 +396,11 @@ static void q800_init(MachineState *machine)
> sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 9 * NUBUS_SUPER_SLOT_SIZE);
> sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, NUBUS_SLOT_BASE +
> 9 * NUBUS_SLOT_SIZE);
> + for (i = 0; i < VIA2_NUBUS_IRQ_NB; i++) {
> + qdev_connect_gpio_out(dev, 9 + i,
> + qdev_get_gpio_in_named(via2_dev, "nubus-irq",
> + VIA2_NUBUS_IRQ_9 + i));
> + }
Hopefully Laurent can double-check the definition values.
Otherwise for the qdev API usage:
Reviewed-by: Philippe Mathieu-Daudé <f4...@amsat.org>
