On 3/25/2022 12:18 AM, Michael Qiu wrote:
On 2022/3/25 14:32, Si-Wei Liu Wrote:
On 3/23/2022 2:20 AM, Jason Wang wrote:
Adding Eugenio, and Ling Shan.
On Wed, Mar 23, 2022 at 4:58 PM <08005...@163.com> wrote:
From: Michael Qiu <qiud...@archeros.com>
Currently, when VM poweroff, it will trigger vdpa
device(such as mlx bluefield2 VF) reset twice, this leads
to below issue:
vhost VQ 2 ring restore failed: -22: Invalid argument (22)
This because in vhost_dev_stop(), qemu tries to stop the device,
then stop the queue: vhost_virtqueue_stop().
In vhost_dev_stop(), it resets the device, which clear some flags
in low level driver, and the driver finds
that the VQ is invalied, this is the root cause.
Actually, device reset will be called within func release()
To solve the issue, vdpa should set vring unready, and
remove reset ops in device stop: vhost_dev_start(hdev, false).
This is an interesting issue. Do you see a real issue except for the
above warnings.
The reason we "abuse" reset is that we don't have a stop uAPI for
vhost. We plan to add a status bit to stop the whole device in the
virtio spec, but considering it may take a while maybe we can first
introduce a new uAPI/ioctl for that.
Yep. What was missing here is a vdpa specific uAPI for per-virtqueue
stop/suspend rather than spec level amendment to stop the whole
device (including both vq and config space). For now we can have vDPA
specific means to control the vq, something vDPA hardware vendor must
support for live migration, e.g. datapath switching to shadow vq. I
believe the spec amendment may follow to define a bit for virtio
feature negotiation later on if needed (FWIW virtio-vdpa already does
set_vq_ready(..., 0) to stop the vq).
However, there's a flaw in this patch, see below.
Note that the stop doesn't just work for virtqueue but others like,
e.g config space. But considering we don't have config interrupt
support right now, we're probably fine.
Checking the driver, it looks to me only the IFCVF's set_vq_ready() is
problematic, Ling Shan, please have a check. And we probably need a
workaround for vp_vdpa as well.
Anyhow, this seems to be better than reset. So for 7.1:
Acked-by: Jason Wang <jasow...@redhat.com>
Signed-off-by: Michael Qiu<qiud...@archeros.com>
---
hw/virtio/vhost-vdpa.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c
index c5ed7a3..d858b4f 100644
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -719,14 +719,14 @@ static int vhost_vdpa_get_vq_index(struct
vhost_dev *dev, int idx)
return idx;
}
-static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
+static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev,
unsigned int ready)
{
int i;
trace_vhost_vdpa_set_vring_ready(dev);
for (i = 0; i < dev->nvqs; ++i) {
struct vhost_vring_state state = {
.index = dev->vq_index + i,
- .num = 1,
+ .num = ready,
};
vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
}
@@ -1088,8 +1088,9 @@ static int vhost_vdpa_dev_start(struct
vhost_dev *dev, bool started)
if (unlikely(!ok)) {
return -1;
}
- vhost_vdpa_set_vring_ready(dev);
+ vhost_vdpa_set_vring_ready(dev, 1);
} else {
+ vhost_vdpa_set_vring_ready(dev, 0);
ok = vhost_vdpa_svqs_stop(dev);
if (unlikely(!ok)) {
return -1;
@@ -1105,7 +1106,6 @@ static int vhost_vdpa_dev_start(struct
vhost_dev *dev, bool started)
memory_listener_register(&v->listener,
&address_space_memory);
return vhost_vdpa_add_status(dev,
VIRTIO_CONFIG_S_DRIVER_OK);
} else {
- vhost_vdpa_reset_device(dev);
Unfortunately, the reset can't be be removed from here as this code
path usually involves virtio reset or status change for e.g. invoked
via virtio_net_set_status(... , 0). Ideally we should use the
VhostOps.vhost_reset_device() to reset the vhost-vdpa device where
status change is involved after vhost_dev_stop() is done, but this
distinction is not there yet as of today in all of the virtio devices
except vhost_user_scsi.
Alternatively we may be able to do something like below, stop the
virtqueue in vhost_vdpa_get_vring_base() in the
vhost_virtqueue_stop() context. Only until the hardware vq is
stopped, svq can stop and unmap then vhost-vdpa would reset the
device status. It kinda works, but not in a perfect way...
As I indicated above, this is an less ideal way to address the issue you
came across about, without losing functionality or introducing
regression to the code. Ideally it'd be best to get fixed in a clean
way, though that would a little more effort in code refactoring.
Personally I feel that the error message you saw is somewhat benign and
don't think it caused any real problem. Did you see trouble if living
with the bogus error message for the moment?
--- a/hw/virtio/vhost-vdpa.c
+++ b/hw/virtio/vhost-vdpa.c
@@ -564,14 +564,14 @@ static int vhost_vdpa_get_vq_index(struct
vhost_dev *dev, int idx)
return idx;
}
-static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev)
+static int vhost_vdpa_set_vring_ready(struct vhost_dev *dev, int
enable)
{
int i;
trace_vhost_vdpa_set_vring_ready(dev);
for (i = 0; i < dev->nvqs; ++i) {
struct vhost_vring_state state = {
.index = dev->vq_index + i,
- .num = 1,
+ .num = enable,
};
vhost_vdpa_call(dev, VHOST_VDPA_SET_VRING_ENABLE, &state);
}
@@ -641,7 +641,7 @@ static int vhost_vdpa_dev_start(struct vhost_dev
*dev, bool started)
if (started) {
vhost_vdpa_host_notifiers_init(dev);
- vhost_vdpa_set_vring_ready(dev);
+ vhost_vdpa_set_vring_ready(dev, 1);
} else {
vhost_vdpa_host_notifiers_uninit(dev, dev->nvqs);
}
@@ -708,6 +708,9 @@ static int vhost_vdpa_get_vring_base(struct
vhost_dev *dev,
{
int ret;
+ /* Deactivate the queue (best effort) */
+ vhost_vdpa_set_vring_ready(dev, 0);
+
I don't think it's a good idea to change the state in "get" function,
get means "read" not "write".
Well, if you look at the context of vhost_vdpa_get_vring_base(), the
only caller is vhost_virtqueue_stop(). Without stopping the hardware
ahead, it doesn't make sense to effectively get a used_index snapshot
for resuming/restarting the vq. It might be more obvious and sensible to
see that were to introduce another Vhost op to suspend the vq right
before the get_vring_base() call, though I wouldn't bother doing it.
ret = vhost_vdpa_call(dev, VHOST_GET_VRING_BASE, ring);
trace_vhost_vdpa_get_vring_base(dev, ring->index, ring->num);
return ret;
diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
index 437347a..2e917d8 100644
--- a/hw/virtio/vhost.c
+++ b/hw/virtio/vhost.c
@@ -1832,15 +1832,15 @@ void vhost_dev_stop(struct vhost_dev *hdev,
VirtIODevice *vdev)
/* should only be called after backend is connected */
assert(hdev->vhost_ops);
- if (hdev->vhost_ops->vhost_dev_start) {
- hdev->vhost_ops->vhost_dev_start(hdev, false);
- }
for (i = 0; i < hdev->nvqs; ++i) {
vhost_virtqueue_stop(hdev,
vdev,
hdev->vqs + i,
hdev->vq_index + i);
}
+ if (hdev->vhost_ops->vhost_dev_start) {
+ hdev->vhost_ops->vhost_dev_start(hdev, false);
+ }
This first idea comes to me is just like this, but at last I don't
choose this solution.
When we start a device, first we start the virtqueue then
vhost_ops->vhost_dev_start.
So in stop stage, in my opinion, we should just do the opposite, do as
the orignal code do. Change the sequential is a dangerous action.
I don't see any danger yet, would you please elaborate the specific
problem you see? I think this sequence is as expected:
1. suspend each individual vq i.e. stop processing upcoming request, and
possibly complete inflight requests -> get_vring_base()
2. tear down virtio resources from VMM for e.g. unmap guest memory
mappings, remove host notifiers, and et al
3. reset device -> vhost_vdpa_reset_device()
Regards,
-Siwei
Thanks,
Michael
if (vhost_dev_has_iommu(hdev)) {
if (hdev->vhost_ops->vhost_set_iotlb_callback) {
Regards,
-Siwei
vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE |
VIRTIO_CONFIG_S_DRIVER);
memory_listener_unregister(&v->listener);
--
1.8.3.1
