Damien Le Moal <damien.lem...@opensource.wdc.com> 于2022年8月17日周三 01:50写道：
>
> On 2022/08/15 23:25, Sam Li wrote:
> > By adding zone management operations in BlockDriver, storage controller
> > emulation can use the new block layer APIs including Report Zone and
> > four zone management operations (open, close, finish, reset).
> >
> > Add zoned storage commands of the device: zone_report(zrp), zone_open(zo),
> > zone_close(zc), zone_reset(zrs), zone_finish(zf).
> >
> > For example, to test zone_report, use following command:
> > $ ./build/qemu-io --image-opts driver=zoned_host_device,
> > filename=/dev/nullb0
> > -c "zrp offset nr_zones"
> >
> > Signed-off-by: Sam Li <faithilike...@gmail.com>
> > Reviewed-by: Hannes Reinecke <h...@suse.de>
> > ---
> > block/block-backend.c | 50 +++++
> > block/file-posix.c | 341 +++++++++++++++++++++++++++++-
> > block/io.c | 41 ++++
> > include/block/block-common.h | 1 -
> > include/block/block-io.h | 13 ++
> > include/block/block_int-common.h | 22 +-
> > include/block/raw-aio.h | 6 +-
> > include/sysemu/block-backend-io.h | 6 +
> > meson.build | 1 +
> > qapi/block-core.json | 8 +-
> > qemu-io-cmds.c | 143 +++++++++++++
> > 11 files changed, 625 insertions(+), 7 deletions(-)
> >
> > diff --git a/block/block-backend.c b/block/block-backend.c
> > index d4a5df2ac2..fc639b0cd7 100644
> > --- a/block/block-backend.c
> > +++ b/block/block-backend.c
> > @@ -1775,6 +1775,56 @@ int coroutine_fn blk_co_flush(BlockBackend *blk)
> > return ret;
> > }
> >
> > +/*
> > + * Send a zone_report command.
> > + * offset is a byte offset from the start of the device. No alignment
> > + * required for offset.
> > + * nr_zones represents IN maximum and OUT actual.
> > + */
> > +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> > + unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones)
> > +{
> > + int ret;
> > + IO_CODE();
> > +
> > + blk_inc_in_flight(blk); /* increase before waiting */
> > + blk_wait_while_drained(blk);
> > + if (!blk_is_available(blk)) {
> > + blk_dec_in_flight(blk);
> > + return -ENOMEDIUM;
> > + }
> > + ret = bdrv_co_zone_report(blk_bs(blk), offset, nr_zones, zones);
> > + blk_dec_in_flight(blk);
> > + return ret;
> > +}
> > +
> > +/*
> > + * Send a zone_management command.
> > + * offset is the starting zone specified as a sector offset.
> > + * len is the maximum number of sectors the command should operate on.
>
> You should mention that len should be zone size aligned. Also, for
> completness,
> add a short description of the op argument too ?
>
> > + */
> > +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> > + int64_t offset, int64_t len)
> > +{
> > + int ret;
> > + IO_CODE();
> > +
> > + ret = blk_check_byte_request(blk, offset, len);
> > + if (ret < 0) {
> > + return ret;
> > + }
> > + blk_inc_in_flight(blk);
> > + blk_wait_while_drained(blk);
> > + if (!blk_is_available(blk)) {
> > + blk_dec_in_flight(blk);
> > + return -ENOMEDIUM;
> > + }
> > + ret = bdrv_co_zone_mgmt(blk_bs(blk), op, offset, len);
> > + blk_dec_in_flight(blk);
> > + return ret;
> > +}
> > +
> > void blk_drain(BlockBackend *blk)
> > {
> > BlockDriverState *bs = blk_bs(blk);
> > diff --git a/block/file-posix.c b/block/file-posix.c
> > index 727389488c..29f67082d9 100644
> > --- a/block/file-posix.c
> > +++ b/block/file-posix.c
> > @@ -67,6 +67,9 @@
> > #include <sys/param.h>
> > #include <sys/syscall.h>
> > #include <sys/vfs.h>
> > +#if defined(CONFIG_BLKZONED)
> > +#include <linux/blkzoned.h>
> > +#endif
> > #include <linux/cdrom.h>
> > #include <linux/fd.h>
> > #include <linux/fs.h>
> > @@ -216,6 +219,13 @@ typedef struct RawPosixAIOData {
> > PreallocMode prealloc;
> > Error **errp;
> > } truncate;
> > + struct {
> > + unsigned int *nr_zones;
> > + BlockZoneDescriptor *zones;
> > + } zone_report;
> > + struct {
> > + unsigned long ioctl_op;
>
> May be clarify this field usage by calling it zone_op ?
>
> > + } zone_mgmt;
> > };
> > } RawPosixAIOData;
> >
> > @@ -1328,7 +1338,7 @@ static void raw_refresh_limits(BlockDriverState *bs,
> > Error **errp)
> > #endif
> >
> > if (bs->sg || S_ISBLK(st.st_mode)) {
> > - int ret = hdev_get_max_hw_transfer(s->fd, &st);
> > + ret = hdev_get_max_hw_transfer(s->fd, &st);
> >
> > if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
> > bs->bl.max_hw_transfer = ret;
> > @@ -1340,11 +1350,32 @@ static void raw_refresh_limits(BlockDriverState
> > *bs, Error **errp)
> > }
> > }
> >
> > - ret = get_sysfs_zoned_model(s->fd, &st, &zoned);
> > + ret = get_sysfs_zoned_model(&st, &zoned);
> > if (ret < 0) {
> > zoned = BLK_Z_NONE;
> > }
> > bs->bl.zoned = zoned;
> > + if (zoned != BLK_Z_NONE) {
> > + ret = get_sysfs_long_val(&st, "chunk_sectors");
> > + if (ret > 0) {
> > + bs->bl.zone_sectors = ret;
> > + }
> > +
> > + ret = get_sysfs_long_val(&st, "zone_append_max_bytes");
> > + if (ret > 0) {
> > + bs->bl.zone_append_max_bytes = ret;
> > + }
> > +
> > + ret = get_sysfs_long_val(&st, "max_open_zones");
> > + if (ret > 0) {
>
> The value can be 0, so this should be "if (ret >= 0) {".
>
> > + bs->bl.max_open_zones = ret;
> > + }
> > +
> > + ret = get_sysfs_long_val(&st, "max_active_zones");
> > + if (ret > 0) {
>
> The value can be 0, so this should be "if (ret >= 0) {".
>
> > + bs->bl.max_active_zones = ret;
> > + }
> > + }
> > }
> >
> > static int check_for_dasd(int fd)
> > @@ -1839,6 +1870,134 @@ static off_t copy_file_range(int in_fd, off_t
> > *in_off, int out_fd,
> > }
> > #endif
> >
> > +/*
> > + * parse_zone - Fill a zone descriptor
> > + */
> > +#if defined(CONFIG_BLKZONED)
> > +static inline void parse_zone(struct BlockZoneDescriptor *zone,
> > + struct blk_zone *blkz) {
> > + zone->start = blkz->start;
> > + zone->length = blkz->len;
> > + zone->cap = blkz->capacity;
> > + zone->wp = blkz->wp;
> > +
> > + switch (blkz->type) {
> > + case BLK_ZONE_TYPE_SEQWRITE_REQ:
> > + zone->type = BLK_ZT_SWR;
> > + break;
> > + case BLK_ZONE_TYPE_SEQWRITE_PREF:
> > + zone->type = BLK_ZT_SWP;
> > + break;
> > + case BLK_ZONE_TYPE_CONVENTIONAL:
> > + zone->type = BLK_ZT_CONV;
> > + break;
> > + default:
> > + error_report("Invalid zone type: 0x%x", blkz->type);
> > + }
> > +
> > + switch (blkz->cond) {
> > + case BLK_ZONE_COND_NOT_WP:
> > + zone->cond = BLK_ZS_NOT_WP;
> > + break;
> > + case BLK_ZONE_COND_EMPTY:
> > + zone->cond = BLK_ZS_EMPTY;
> > + break;
> > + case BLK_ZONE_COND_IMP_OPEN:
> > + zone->cond =BLK_ZS_IOPEN;
> > + break;
> > + case BLK_ZONE_COND_EXP_OPEN:
> > + zone->cond = BLK_ZS_EOPEN;
> > + break;
> > + case BLK_ZONE_COND_CLOSED:
> > + zone->cond = BLK_ZS_CLOSED;
> > + break;
> > + case BLK_ZONE_COND_READONLY:
> > + zone->cond = BLK_ZS_RDONLY;
> > + break;
> > + case BLK_ZONE_COND_FULL:
> > + zone->cond = BLK_ZS_FULL;
> > + break;
> > + case BLK_ZONE_COND_OFFLINE:
> > + zone->cond = BLK_ZS_OFFLINE;
> > + break;
> > + default:
> > + error_report("Invalid zone condition 0x%x", blkz->cond);
> > + }
> > +}
> > +#endif
> > +
> > +static int handle_aiocb_zone_report(void *opaque) {
> > +#if defined(CONFIG_BLKZONED)
> > + RawPosixAIOData *aiocb = opaque;
> > + int fd = aiocb->aio_fildes;
> > + unsigned int *nr_zones = aiocb->zone_report.nr_zones;
> > + BlockZoneDescriptor *zones = aiocb->zone_report.zones;
> > + int64_t sector = aiocb->aio_offset;
> > +
> > + struct blk_zone *blkz;
> > + int64_t rep_size;
> > + unsigned int nrz;
> > + int ret, n = 0, i = 0;
> > +
> > + nrz = *nr_zones;
> > + rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct
> > blk_zone);
> > + g_autofree struct blk_zone_report *rep = NULL;
> > + rep = g_malloc(rep_size);
> > +
> > + blkz = (struct blk_zone *)(rep + 1);
> > + while (n < nrz) {
> > + memset(rep, 0, rep_size);
> > + rep->sector = sector;
> > + rep->nr_zones = nrz - n;
> > +
> > + ret = ioctl(fd, BLKREPORTZONE, rep);
> > + if (ret != 0) {
> > + error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed
> > %d",
> > + fd, sector, errno);
> > + return -errno;
> > + }
> > +
> > + if (!rep->nr_zones) {
> > + break;
> > + }
> > +
> > + for (i = 0; i < rep->nr_zones; i++, n++) {
> > + parse_zone(&zones[n], &blkz[i]);
> > + /* The next report should start after the last zone reported */
> > + sector = blkz[i].start + blkz[i].len;
> > + }
> > + }
> > +
> > + *nr_zones = n;
> > + return 0;
> > +#else
> > + return -ENOTSUP;
> > +#endif
> > +}
> > +
> > +static int handle_aiocb_zone_mgmt(void *opaque) {
> > +#if defined(CONFIG_BLKZONED)
> > + RawPosixAIOData *aiocb = opaque;
> > + int fd = aiocb->aio_fildes;
> > + int64_t sector = aiocb->aio_offset;
> > + int64_t nr_sectors = aiocb->aio_nbytes;
> > + unsigned long ioctl_op = aiocb->zone_mgmt.ioctl_op;
>
> Nit: I do not think these variables are very useful. You could reference
> directly the aiocb fields in the code below.
>
> > + struct blk_zone_range range;
> > + int ret;
> > +
> > + /* Execute the operation */
> > + range.sector = sector;
> > + range.nr_sectors = nr_sectors;
> > + do {
> > + ret = ioctl(fd, ioctl_op, &range);
> > + } while (ret != 0 && errno == EINTR);
> > +
> > + return ret;
> > +#else
> > + return -ENOTSUP;
> > +#endif
> > +}
> > +
> > static int handle_aiocb_copy_range(void *opaque)
> > {
> > RawPosixAIOData *aiocb = opaque;
> > @@ -3011,6 +3170,124 @@ static void raw_account_discard(BDRVRawState *s,
> > uint64_t nbytes, int ret)
> > }
> > }
> >
> > +/*
> > + * zone report - Get a zone block device's information in the form
> > + * of an array of zone descriptors.
> > + *
> > + * @param bs: passing zone block device file descriptor
> > + * @param zones: an array of zone descriptors to hold zone
> > + * information on reply
> > + * @param offset: offset can be any byte within the zone size.
> > + * @param len: (not sure yet.
> > + * @return 0 on success, -1 on failure
> > + */
> > +static int coroutine_fn raw_co_zone_report(BlockDriverState *bs, int64_t
> > offset,
> > + unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones) {
> > +#if defined(CONFIG_BLKZONED)
> > + BDRVRawState *s = bs->opaque;
> > + RawPosixAIOData acb;
> > +
> > + acb = (RawPosixAIOData) {
> > + .bs = bs,
> > + .aio_fildes = s->fd,
> > + .aio_type = QEMU_AIO_ZONE_REPORT,
> > + /* zoned block devices use 512-byte sectors */
> > + .aio_offset = offset / 512,
>
> This conversion from bytes to 512B sectors would be better placed in
> handle_aiocb_zone_report(). Doing so, all the API uses bytes, similarly to
> other
> operations and the conversion to 512B sectors only done for Linux specific
> ioctl
> code.
>
> > + .zone_report = {
> > + .nr_zones = nr_zones,
> > + .zones = zones,
> > + },
> > + };
> > +
> > + return raw_thread_pool_submit(bs, handle_aiocb_zone_report, &acb);
> > +#else
> > + return -ENOTSUP;
> > +#endif
> > +}
> > +
> > +/*
> > + * zone management operations - Execute an operation on a zone
> > + */
> > +static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp
> > op,
> > + int64_t offset, int64_t len) {
> > +#if defined(CONFIG_BLKZONED)
> > + BDRVRawState *s = bs->opaque;
> > + RawPosixAIOData acb;
> > + int64_t zone_sector, zone_sector_mask;
> > + const char *ioctl_name;
> > + unsigned long ioctl_op;
> > + int ret;
> > +
> > + struct stat st;
> > + if (fstat(s->fd, &st) < 0) {
> > + ret = -errno;
> > + return ret;
> > + }
> > + zone_sector = get_sysfs_long_val(&st, "chunk_sectors");
> > + if (zone_sector < 0) {
> > + error_report("invalid zone sector size %" PRId64 "", zone_sector);
> > + return -EINVAL;
> > + }
>
> You already got this value in bs->bl.zone_sectors in raw_refresh_limits(). So
> I
> you should not need to read it again from sysfs.
>
> > +
> > + zone_sector_mask = zone_sector - 1;
> > + if (offset & zone_sector_mask) {
> > + error_report("sector offset %" PRId64 " is not aligned to zone
> > size "
> > + "%" PRId64 "", offset, zone_sector);
> > + return -EINVAL;
> > + }
> > +
> > + if (len & zone_sector_mask) {
> > + error_report("number of sectors %" PRId64 " is not aligned to zone
> > size"
> > + " %" PRId64 "", len, zone_sector);
> > + return -EINVAL;
> > + }
> > +
> > + switch (op) {
> > + case BLK_ZO_OPEN:
> > + ioctl_name = "BLKOPENZONE";
> > + ioctl_op = BLKOPENZONE;
> > + break;
> > + case BLK_ZO_CLOSE:
> > + ioctl_name = "BLKCLOSEZONE";
> > + ioctl_op = BLKCLOSEZONE;
> > + break;
> > + case BLK_ZO_FINISH:
> > + ioctl_name = "BLKFINISHZONE";
> > + ioctl_op = BLKFINISHZONE;
> > + break;
> > + case BLK_ZO_RESET:
> > + ioctl_name = "BLKRESETZONE";
> > + ioctl_op = BLKRESETZONE;
> > + break;
> > + default:
> > + error_report("Invalid zone operation 0x%x", op);
> > + return -EINVAL;
> > + }
> > +
> > + acb = (RawPosixAIOData) {
> > + .bs = bs,
> > + .aio_fildes = s->fd,
> > + .aio_type = QEMU_AIO_ZONE_MGMT,
> > + .aio_offset = offset,
> > + .aio_nbytes = len,
>
> Are these 2 values in bytes or in 512B sectors ? Looking at
> handle_aiocb_zone_mgmt(), it looks like 512B sectors. So where is the
> conversion
> done from bytes ?
They are both in number of sectors so it doesn't need conversion.
>
> > + .zone_mgmt = {
> > + .ioctl_op = ioctl_op,
> > + },
> > + };
> > +
> > + ret = raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb);
> > + if (ret != 0) {
> > + error_report("ioctl %s failed %d", ioctl_name, errno);
> > + return -errno;
> > + }
> > +
> > + return ret;
> > +#else
> > + return -ENOTSUP;
> > +#endif
> > +}
> > +
> > static coroutine_fn int
> > raw_do_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes,
> > bool blkdev)
> > @@ -3511,6 +3788,14 @@ static void hdev_parse_filename(const char
> > *filename, QDict *options,
> > bdrv_parse_filename_strip_prefix(filename, "host_device:", options);
> > }
> >
> > +#if defined(CONFIG_BLKZONED)
> > +static void zoned_host_device_parse_filename(const char *filename, QDict
> > *options,
> > + Error **errp)
> > +{
> > + bdrv_parse_filename_strip_prefix(filename, "zoned_host_device:",
> > options);
> > +}
> > +#endif
> > +
> > static bool hdev_is_sg(BlockDriverState *bs)
> > {
> >
> > @@ -3741,6 +4026,55 @@ static BlockDriver bdrv_host_device = {
> > #endif
> > };
> >
> > +#if defined(CONFIG_BLKZONED)
> > +static BlockDriver bdrv_zoned_host_device = {
> > + .format_name = "zoned_host_device",
> > + .protocol_name = "zoned_host_device",
> > + .instance_size = sizeof(BDRVRawState),
> > + .bdrv_needs_filename = true,
> > + .bdrv_probe_device = hdev_probe_device,
> > + .bdrv_parse_filename = zoned_host_device_parse_filename,
> > + .bdrv_file_open = hdev_open,
> > + .bdrv_close = raw_close,
> > + .bdrv_reopen_prepare = raw_reopen_prepare,
> > + .bdrv_reopen_commit = raw_reopen_commit,
> > + .bdrv_reopen_abort = raw_reopen_abort,
> > + .bdrv_co_create_opts = bdrv_co_create_opts_simple,
> > + .create_opts = &bdrv_create_opts_simple,
> > + .mutable_opts = mutable_opts,
> > + .bdrv_co_invalidate_cache = raw_co_invalidate_cache,
> > + .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
> > +
> > + .bdrv_co_preadv = raw_co_preadv,
> > + .bdrv_co_pwritev = raw_co_pwritev,
> > + .bdrv_co_flush_to_disk = raw_co_flush_to_disk,
> > + .bdrv_co_pdiscard = hdev_co_pdiscard,
> > + .bdrv_co_copy_range_from = raw_co_copy_range_from,
> > + .bdrv_co_copy_range_to = raw_co_copy_range_to,
> > + .bdrv_refresh_limits = raw_refresh_limits,
> > + .bdrv_io_plug = raw_aio_plug,
> > + .bdrv_io_unplug = raw_aio_unplug,
> > + .bdrv_attach_aio_context = raw_aio_attach_aio_context,
> > +
> > + .bdrv_co_truncate = raw_co_truncate,
> > + .bdrv_getlength = raw_getlength,
> > + .bdrv_get_info = raw_get_info,
> > + .bdrv_get_allocated_file_size
> > + = raw_get_allocated_file_size,
> > + .bdrv_get_specific_stats = hdev_get_specific_stats,
> > + .bdrv_check_perm = raw_check_perm,
> > + .bdrv_set_perm = raw_set_perm,
> > + .bdrv_abort_perm_update = raw_abort_perm_update,
> > + .bdrv_probe_blocksizes = hdev_probe_blocksizes,
> > + .bdrv_probe_geometry = hdev_probe_geometry,
> > + .bdrv_co_ioctl = hdev_co_ioctl,
> > +
> > + /* zone management operations */
> > + .bdrv_co_zone_report = raw_co_zone_report,
> > + .bdrv_co_zone_mgmt = raw_co_zone_mgmt,
> > +};
> > +#endif
> > +
> > #if defined(__linux__) || defined(__FreeBSD__) ||
> > defined(__FreeBSD_kernel__)
> > static void cdrom_parse_filename(const char *filename, QDict *options,
> > Error **errp)
> > @@ -4001,6 +4335,9 @@ static void bdrv_file_init(void)
> > bdrv_register(&bdrv_file);
> > #if defined(HAVE_HOST_BLOCK_DEVICE)
> > bdrv_register(&bdrv_host_device);
> > +#if defined(CONFIG_BLKZONED)
> > + bdrv_register(&bdrv_zoned_host_device);
> > +#endif
> > #ifdef __linux__
> > bdrv_register(&bdrv_host_cdrom);
> > #endif
> > diff --git a/block/io.c b/block/io.c
> > index 0a8cbefe86..de9ec1d740 100644
> > --- a/block/io.c
> > +++ b/block/io.c
> > @@ -3198,6 +3198,47 @@ out:
> > return co.ret;
> > }
> >
> > +int bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> > + unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones)
> > +{
> > + BlockDriver *drv = bs->drv;
> > + CoroutineIOCompletion co = {
> > + .coroutine = qemu_coroutine_self(),
> > + };
> > + IO_CODE();
> > +
> > + bdrv_inc_in_flight(bs);
> > + if (!drv || !drv->bdrv_co_zone_report) {
> > + co.ret = -ENOTSUP;
> > + goto out;
> > + }
> > + co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
> > +out:
> > + bdrv_dec_in_flight(bs);
> > + return co.ret;
> > +}
> > +
> > +int bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
> > + int64_t offset, int64_t len)
> > +{
> > + BlockDriver *drv = bs->drv;
> > + CoroutineIOCompletion co = {
> > + .coroutine = qemu_coroutine_self(),
> > + };
> > + IO_CODE();
> > +
> > + bdrv_inc_in_flight(bs);
> > + if (!drv || !drv->bdrv_co_zone_mgmt) {
> > + co.ret = -ENOTSUP;
> > + goto out;
> > + }
> > + co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
> > +out:
> > + bdrv_dec_in_flight(bs);
> > + return co.ret;
> > +}
> > +
> > void *qemu_blockalign(BlockDriverState *bs, size_t size)
> > {
> > IO_CODE();
> > diff --git a/include/block/block-common.h b/include/block/block-common.h
> > index 36bd0e480e..5102fa6858 100644
> > --- a/include/block/block-common.h
> > +++ b/include/block/block-common.h
> > @@ -23,7 +23,6 @@
> > */
> > #ifndef BLOCK_COMMON_H
> > #define BLOCK_COMMON_H
> > -
> > #include "block/aio.h"
> > #include "block/aio-wait.h"
> > #include "qemu/iov.h"
> > diff --git a/include/block/block-io.h b/include/block/block-io.h
> > index fd25ffa9be..55ad261e16 100644
> > --- a/include/block/block-io.h
> > +++ b/include/block/block-io.h
> > @@ -88,6 +88,13 @@ int bdrv_co_ioctl(BlockDriverState *bs, int req, void
> > *buf);
> > /* Ensure contents are flushed to disk. */
> > int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
> >
> > +/* Report zone information of zone block device. */
> > +int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> > + unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones);
> > +int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
> > + int64_t offset, int64_t len);
> > +
> > int bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int64_t bytes);
> > bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
> > int bdrv_block_status(BlockDriverState *bs, int64_t offset,
> > @@ -297,6 +304,12 @@ bdrv_readv_vmstate(BlockDriverState *bs, QEMUIOVector
> > *qiov, int64_t pos);
> > int generated_co_wrapper
> > bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos);
> >
> > +int generated_co_wrapper
> > +blk_zone_report(BlockBackend *blk, int64_t offset, unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones);
> > +int generated_co_wrapper
> > +blk_zone_mgmt(BlockBackend *blk, BlockZoneOp op, int64_t offset, int64_t
> > len);
> > +
> > /**
> > * bdrv_parent_drained_begin_single:
> > *
> > diff --git a/include/block/block_int-common.h
> > b/include/block/block_int-common.h
> > index 7f7863cc9e..de44c7b6f4 100644
> > --- a/include/block/block_int-common.h
> > +++ b/include/block/block_int-common.h
> > @@ -94,7 +94,6 @@ typedef struct BdrvTrackedRequest {
> > struct BdrvTrackedRequest *waiting_for;
> > } BdrvTrackedRequest;
> >
> > -
> > struct BlockDriver {
> > /*
> > * These fields are initialized when this object is created,
> > @@ -691,6 +690,12 @@ struct BlockDriver {
> > QEMUIOVector *qiov,
> > int64_t pos);
> >
> > + int coroutine_fn (*bdrv_co_zone_report)(BlockDriverState *bs,
> > + int64_t offset, unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones);
> > + int coroutine_fn (*bdrv_co_zone_mgmt)(BlockDriverState *bs,
> > BlockZoneOp op,
> > + int64_t offset, int64_t len);
> > +
> > /* removable device specific */
> > bool (*bdrv_is_inserted)(BlockDriverState *bs);
> > void (*bdrv_eject)(BlockDriverState *bs, bool eject_flag);
> > @@ -828,6 +833,21 @@ typedef struct BlockLimits {
> >
> > /* device zone model */
> > BlockZoneModel zoned;
> > +
> > + /* zone size expressed in 512-byte sectors */
> > + uint32_t zone_sectors;
> > +
> > + /* total number of zones */
> > + unsigned int nr_zones;
> > +
> > + /* maximum size in bytes of a zone append write operation */
> > + int64_t zone_append_max_bytes;
> > +
> > + /* maximum number of open zones */
> > + int64_t max_open_zones;
> > +
> > + /* maximum number of active zones */
> > + int64_t max_active_zones;
> > } BlockLimits;
> >
> > typedef struct BdrvOpBlocker BdrvOpBlocker;
> > diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
> > index 21fc10c4c9..3d26929cdd 100644
> > --- a/include/block/raw-aio.h
> > +++ b/include/block/raw-aio.h
> > @@ -29,6 +29,8 @@
> > #define QEMU_AIO_WRITE_ZEROES 0x0020
> > #define QEMU_AIO_COPY_RANGE 0x0040
> > #define QEMU_AIO_TRUNCATE 0x0080
> > +#define QEMU_AIO_ZONE_REPORT 0x0100
> > +#define QEMU_AIO_ZONE_MGMT 0x0200
> > #define QEMU_AIO_TYPE_MASK \
> > (QEMU_AIO_READ | \
> > QEMU_AIO_WRITE | \
> > @@ -37,7 +39,9 @@
> > QEMU_AIO_DISCARD | \
> > QEMU_AIO_WRITE_ZEROES | \
> > QEMU_AIO_COPY_RANGE | \
> > - QEMU_AIO_TRUNCATE)
> > + QEMU_AIO_TRUNCATE | \
> > + QEMU_AIO_ZONE_REPORT | \
> > + QEMU_AIO_ZONE_MGMT)
> >
> > /* AIO flags */
> > #define QEMU_AIO_MISALIGNED 0x1000
> > diff --git a/include/sysemu/block-backend-io.h
> > b/include/sysemu/block-backend-io.h
> > index 50f5aa2e07..6e7df1d93b 100644
> > --- a/include/sysemu/block-backend-io.h
> > +++ b/include/sysemu/block-backend-io.h
> > @@ -156,6 +156,12 @@ int generated_co_wrapper
> > blk_pwrite_zeroes(BlockBackend *blk, int64_t offset,
> > int coroutine_fn blk_co_pwrite_zeroes(BlockBackend *blk, int64_t offset,
> > int64_t bytes, BdrvRequestFlags
> > flags);
> >
> > +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> > + unsigned int *nr_zones,
> > + BlockZoneDescriptor *zones);
> > +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> > + int64_t offset, int64_t len);
> > +
> > int generated_co_wrapper blk_pdiscard(BlockBackend *blk, int64_t offset,
> > int64_t bytes);
> > int coroutine_fn blk_co_pdiscard(BlockBackend *blk, int64_t offset,
> > diff --git a/meson.build b/meson.build
> > index 294e9a8f32..c3219b0e87 100644
> > --- a/meson.build
> > +++ b/meson.build
> > @@ -1883,6 +1883,7 @@ config_host_data.set('CONFIG_REPLICATION',
> > get_option('live_block_migration').al
> > # has_header
> > config_host_data.set('CONFIG_EPOLL', cc.has_header('sys/epoll.h'))
> > config_host_data.set('CONFIG_LINUX_MAGIC_H',
> > cc.has_header('linux/magic.h'))
> > +config_host_data.set('CONFIG_BLKZONED', cc.has_header('linux/blkzoned.h'))
> > config_host_data.set('CONFIG_VALGRIND_H',
> > cc.has_header('valgrind/valgrind.h'))
> > config_host_data.set('HAVE_BTRFS_H', cc.has_header('linux/btrfs.h'))
> > config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h'))
> > diff --git a/qapi/block-core.json b/qapi/block-core.json
> > index 2173e7734a..c6bbb7a037 100644
> > --- a/qapi/block-core.json
> > +++ b/qapi/block-core.json
> > @@ -2942,6 +2942,7 @@
> > # @compress: Since 5.0
> > # @copy-before-write: Since 6.2
> > # @snapshot-access: Since 7.0
> > +# @zoned_host_device: Since 7.2
> > #
> > # Since: 2.9
> > ##
> > @@ -2955,7 +2956,8 @@
> > 'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme',
> > 'parallels',
> > 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
> > { 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
> > - 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
> > + 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat',
> > + { 'name': 'zoned_host_device', 'if': 'CONFIG_BLKZONED' } ] }
> >
> > ##
> > # @BlockdevOptionsFile:
> > @@ -4329,7 +4331,9 @@
> > 'vhdx': 'BlockdevOptionsGenericFormat',
> > 'vmdk': 'BlockdevOptionsGenericCOWFormat',
> > 'vpc': 'BlockdevOptionsGenericFormat',
> > - 'vvfat': 'BlockdevOptionsVVFAT'
> > + 'vvfat': 'BlockdevOptionsVVFAT',
> > + 'zoned_host_device': { 'type': 'BlockdevOptionsFile',
> > + 'if': 'CONFIG_BLKZONED' }
> > } }
> >
> > ##
> > diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
> > index 952dc940f1..687c3a624c 100644
> > --- a/qemu-io-cmds.c
> > +++ b/qemu-io-cmds.c
> > @@ -1712,6 +1712,144 @@ static const cmdinfo_t flush_cmd = {
> > .oneline = "flush all in-core file state to disk",
> > };
> >
> > +static int zone_report_f(BlockBackend *blk, int argc, char **argv)
> > +{
> > + int ret;
> > + int64_t offset;
> > + unsigned int nr_zones;
> > +
> > + ++optind;
> > + offset = cvtnum(argv[optind]);
> > + ++optind;
> > + nr_zones = cvtnum(argv[optind]);
> > +
> > + g_autofree BlockZoneDescriptor *zones = NULL;
> > + zones = g_new(BlockZoneDescriptor, nr_zones);
> > + ret = blk_zone_report(blk, offset, &nr_zones, zones);
> > + if (ret < 0) {
> > + printf("zone report failed: %s\n", strerror(-ret));
> > + } else {
> > + for (int i = 0; i < nr_zones; ++i) {
> > + printf("start: 0x%" PRIx64 ", len 0x%" PRIx64 ", "
> > + "cap"" 0x%" PRIx64 ",wptr 0x%" PRIx64 ", "
> > + "zcond:%u, [type: %u]\n",
> > + zones[i].start, zones[i].length, zones[i].cap,
> > zones[i].wp,
> > + zones[i].cond, zones[i].type);
> > + }
> > + }
> > + return ret;
> > +}
> > +
> > +static const cmdinfo_t zone_report_cmd = {
> > + .name = "zone_report",
> > + .altname = "zrp",
> > + .cfunc = zone_report_f,
> > + .argmin = 2,
> > + .argmax = 2,
> > + .args = "offset number",
> > + .oneline = "report zone information",
> > +};
> > +
> > +static int zone_open_f(BlockBackend *blk, int argc, char **argv)
> > +{
> > + int ret;
> > + int64_t offset, len;
> > + ++optind;
> > + offset = cvtnum(argv[optind]);
> > + ++optind;
> > + len = cvtnum(argv[optind]);
> > + ret = blk_zone_mgmt(blk, BLK_ZO_OPEN, offset, len);
> > + if (ret < 0) {
> > + printf("zone open failed: %s\n", strerror(-ret));
> > + }
> > + return ret;
> > +}
> > +
> > +static const cmdinfo_t zone_open_cmd = {
> > + .name = "zone_open",
> > + .altname = "zo",
> > + .cfunc = zone_open_f,
> > + .argmin = 2,
> > + .argmax = 2,
> > + .args = "offset len",
> > + .oneline = "explicit open a range of zones in zone block device",
> > +};
> > +
> > +static int zone_close_f(BlockBackend *blk, int argc, char **argv)
> > +{
> > + int ret;
> > + int64_t offset, len;
> > + ++optind;
> > + offset = cvtnum(argv[optind]);
> > + ++optind;
> > + len = cvtnum(argv[optind]);
> > + ret = blk_zone_mgmt(blk, BLK_ZO_CLOSE, offset, len);
> > + if (ret < 0) {
> > + printf("zone close failed: %s\n", strerror(-ret));
> > + }
> > + return ret;
> > +}
> > +
> > +static const cmdinfo_t zone_close_cmd = {
> > + .name = "zone_close",
> > + .altname = "zc",
> > + .cfunc = zone_close_f,
> > + .argmin = 2,
> > + .argmax = 2,
> > + .args = "offset len",
> > + .oneline = "close a range of zones in zone block device",
> > +};
> > +
> > +static int zone_finish_f(BlockBackend *blk, int argc, char **argv)
> > +{
> > + int ret;
> > + int64_t offset, len;
> > + ++optind;
> > + offset = cvtnum(argv[optind]);
> > + ++optind;
> > + len = cvtnum(argv[optind]);
> > + ret = blk_zone_mgmt(blk, BLK_ZO_FINISH, offset, len);
> > + if (ret < 0) {
> > + printf("zone finish failed: %s\n", strerror(-ret));
> > + }
> > + return ret;
> > +}
> > +
> > +static const cmdinfo_t zone_finish_cmd = {
> > + .name = "zone_finish",
> > + .altname = "zf",
> > + .cfunc = zone_finish_f,
> > + .argmin = 2,
> > + .argmax = 2,
> > + .args = "offset len",
> > + .oneline = "finish a range of zones in zone block device",
> > +};
> > +
> > +static int zone_reset_f(BlockBackend *blk, int argc, char **argv)
> > +{
> > + int ret;
> > + int64_t offset, len;
> > + ++optind;
> > + offset = cvtnum(argv[optind]);
> > + ++optind;
> > + len = cvtnum(argv[optind]);
> > + ret = blk_zone_mgmt(blk, BLK_ZO_RESET, offset, len);
> > + if (ret < 0) {
> > + printf("zone reset failed: %s\n", strerror(-ret));
> > + }
> > + return ret;
> > +}
> > +
> > +static const cmdinfo_t zone_reset_cmd = {
> > + .name = "zone_reset",
> > + .altname = "zrs",
> > + .cfunc = zone_reset_f,
> > + .argmin = 2,
> > + .argmax = 2,
> > + .args = "offset len",
> > + .oneline = "reset a zone write pointer in zone block device",
> > +};
> > +
> > static int truncate_f(BlockBackend *blk, int argc, char **argv);
> > static const cmdinfo_t truncate_cmd = {
> > .name = "truncate",
> > @@ -2504,6 +2642,11 @@ static void __attribute((constructor))
> > init_qemuio_commands(void)
> > qemuio_add_command(&aio_write_cmd);
> > qemuio_add_command(&aio_flush_cmd);
> > qemuio_add_command(&flush_cmd);
> > + qemuio_add_command(&zone_report_cmd);
> > + qemuio_add_command(&zone_open_cmd);
> > + qemuio_add_command(&zone_close_cmd);
> > + qemuio_add_command(&zone_finish_cmd);
> > + qemuio_add_command(&zone_reset_cmd);
> > qemuio_add_command(&truncate_cmd);
> > qemuio_add_command(&length_cmd);
> > qemuio_add_command(&info_cmd);
>
>
> --
> Damien Le Moal
> Western Digital Research
