On Thu, Dec 10, 2020 at 3:41 PM Francesco Pelullo <f.pelu...@gmail.com> wrote: > > Hi all, > > I'm running QGIS 3.10 LTR on Windows 10. > > My project has 6 .gpkg files connected, everyone of these has 14 layers with > points geometries, every layer counts about 16.000 features. > > So my QGIS project manage about 1.344.000 points, not used at same time. > > When i open this project, QGIS needs about 15 minutes for go ready. > > Instead, if i store these points in separate .TXT files, QGIS needs only few > seconds for load layers and go ready. Also .shp layer format seems more > performant than .gpkg > > It seems to me that they are not really efficient for these points layers. > > Is this a my problem? Or there are some tricks i could use? >
Hi, if you can share your project and data we can check if it also happens on other machines or if it is a local issue. But first you should also check if the issue is still valid with QGIS 3.16. Regards -- Alessandro Pasotti QCooperative: www.qcooperative.net ItOpen: www.itopen.it _______________________________________________ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user