I am reposting this as all of my screenshots are edited out. I am running QGIS 3.32.3 Lima on an M1 Chip Macbook Pro with Ventura OS 13.5.2. If any other info on my version is helpful, please ask. I had the same problem running Firenze previously.
I think the error I am getting is a large general problem with my installation, not with the particular "Fill nodata" command. I'm guessing that something is not installed correctly, and would like advice on how to fix my installation (if that is actually the issue). I have used this command on two DEMs, so I don't think that is the issue either. When I run the Fill nodata command, the error says: "No transform is available between NAD83(NSRS2007)/California zone 3 (ftUS); NAVD88 height (ftUS) and ESRI:102242 - NAD_1983_HARN_StatePlane_California_II_FIPS_0402." "No coordinate operations are available between these two systems." I have tried using other fill commands like Fill sinks XXL (wang and liu) and r.basins.fill. None of them fills the holes in the DEM. Any help you can provide would be appreciated. Thanks, Damien PS I am a new QGIS user. I am happy to learn, but my current knowledge is limited. *Damien McAnany Luce* Sustainable Sites AP, ISA-Certified Arborist dam...@permacultureartisans.com <dam...@permacultureartisans.com> Tel. 707.360.5231 Fax. 707.829.0836
_______________________________________________ QGIS-User mailing list QGIS-User@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
