Michael, Put SER2hr or the comms port in the Other Dev in the preferences menu in QTPI.
Set the baud rate in SBASIC, then you will have a high speed comms port through QTPI. Actually the Other Dev box in QTPI overides the SER1/2 in the Preferences menu. If you had a normal QL with Superhermes, then the SER3 port is defined there. All in the QTPI manual. Derek ----- Original Message ----- From: "Michael Grunditz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 30, 2006 10:24 PM Subject: Re: [ql-users] qpti on Q40 > Hello Marcel, > > On 03/30/06, you wrote: >> Tell QTPI not to set the baudrate, instead set it in Basic before >> starting QTPI. > > When I chose ser2h , get *BEEP* ,not implented. I have used qtpi before > but > I don't remeber how I set it up. > > /Michael Grunditz > > _______________________________________________ > QL-Users Mailing List > http://www.q-v-d.demon.co.uk/smsqe.htm > -- > This email has been verified as Virus free > Virus Protection and more available at http://www.plus.net > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.385 / Virus Database: 268.3.3/296 - Release Date: 29/03/2006 > > _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
