IIRC WD includes an install disk that walks you through 
the partitioning
process. It won't allow a partition that is over the 
limit. Admittedly,
this was done several years ago in WIN98, using a 40GB 
WD drive.
Also, it was a P2, Socket A Pentium. (Ithink ;-(  )

Denny

----- Original Message ----- 
From: "Dilwyn Jones" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, February 19, 2007 3:04 PM
Subject: Re: [ql-users] win98se


> Limitation are come from MS-DOS and not really Windows 
> 98 SE.
>
> Using FAT16 (If you don't specify in FDISK you want 
> large partition)
> you can
> format partition of a size a few less than 4 GB.
> With cluster size = 64Kb - FAT 16 is 2^16 cluster - 
> Partition size is
> : 4
> GB.
>
> After this, you may encounter some BIOS limitation on 
> few machines (if
> it's
> very very old).
>
> FAT 12 is only used on floppies. The limitation of FAT 
> 12 is for
> partition
> up to 256 MB
>
> FAT32 (is you said to FDISK you want large partition) 
> is for partition
> up to
> ( 2^28 * 4K !! ) = 8 GB.
>
> So the limitation is 4 GB in FAT16 with cluster of 64 
> KB ( not
> recommended )
> And 8 GB in FAT32 with 4K Clusters and up to 32GB. But 
> be carefull a
> FAT32
> partition isn't recoverable with an MS-DOS floppy 
> disk.
>
> Jimmy.
> http://www.jadiam.org
>
> Ah, I see.
>
> Does it allow for, say, a 40GB hard drive to be seen 
> as several
> smaller partitions by Windows 98SE, say 5 x 8GB 
> partitions?
>
> As 40GB drives seem to be the smallest drives around 
> now (looking at
> eBuyer site anyway) - at 25 pounds very cheap, it 
> seems silly to put a
> 40GB drive on a Win98SE machine if it will only see a 
> few GB and the
> rest goes to waste.
>
> Sorry to persist in asking, it's a long time since I 
> last used Win98SE
> in anger! (All this just to help him put QLay on a 
> cheap old PC to
> give it some life, although it saves it going to 
> landfill and will
> make a perfectly good "QL" even if leaves something to 
> be desired as a
> PC!)
>
> -- 
> Dilwyn Jones
>
> _______________________________________________
> QL-Users Mailing List
> http://www.q-v-d.demon.co.uk/smsqe.htm
>
> 

_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm

Reply via email to