Peter,
a standard QL (even a [Super]Goldcard one) isn't exactly /fast/ anyways.
So speed is relative.
For me it should be faster than a floppy disk but can be slower than a
hard disk.
Standard QL stuff tends to be small - I think the most needed
improvement on a floppy disk on a standard QL is the requirement to swap
floppies al the time.
Cheers
Tobias
Am 17.01.2011 10:53, schrieb Peter:
paul wrote:
A) External interface, plugs into parallel port of SuperGoldCard
B) External interface, plugs into QL ROM port
C) Internal interface, plugs into CPU socket
D) Internal interface, replacing a microdrive(!)
Personally, the option of tucking the adapter/interface inside the
standard QL case has a lot of appeal. would be cool, even compairable
to using the cartidge slot in the Timex 2068 in the 'Good Ol Days'
if there is enough internal physical space for the unit to reside in
the outer of the 2 cavities, that would be just peachy keen!
If I go for option D, I don't think space will be a problem.
The device should fit both microdrive locations.
To those who prefer option D:
* How important would it be to keep an original microdrive functional?
* How important would be speed?
(To reach maximum speed, it is impossible to use the microdrive connectors
for an SD-card device. A second board would be required, attached at a
place where some of the 68008 bus is available. Higher costs, and might
work for GoldCard/SuperGoldCard only.)
All the best
Peter
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
_______________________________________________
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
