Peter's your man for that. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rich Mellor (RWAP) Sent: 11 January 2014 21:17 To: [email protected] Subject: Re: [Ql-Users] QL-SD Card Interface
> As to Javier (I thought his name was Miguel, by the way) and the > alternative QL-SD, which is really just a QL-SD for the ROM port: > Anyone with decent 68K assembler skills can port the driver. It is > only necessary to create a new set of hardware-level interface modules > - basically the routines that (from > memory) init, getSize, GetLBA and PutLBA. In fact you can probably > port the driver to any block-oriented device in that way. Of course, > you do need at least one reliably working QL to do that ;) > > I believe most of the documentation needed is actually in the > commented source code. Oops yes, it is Miguel ( apologies Miguel) - I had just written an email to a Javier - but then it is Saturday evening and I've been relaxing!! Where is the source code for the driver by the way - has it been published? Rich _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
