Change the 500 to 1000 - I think that sets the memory usage to 500K
> On May 8, 2016 at 12:00 PM Renato Barigazzi <[email protected]> wrote: > > > I use exep win1_archive,P,500 > > -----Messaggio originale----- > From: Rich Mellor (RWAP) > Sent: Sunday, May 08, 2016 12:56 PM > To: [email protected] > Subject: Re: [Ql-Users] Archive file > > OK - how are you launching QL Archive? > > The standard version grabs all of the QL memory, unless you use QPAC II's > grabber which sets the maximum memory available to the programs. > > You may be better with Xchange - that has a QL configuration block (from > memory) > to set the maximum space available, so you would need to use QL Config or > MenuConfig to change the space available > > Rich > > > On May 8, 2016 at 11:44 AM Renato Barigazzi <[email protected]> > > wrote: > > > > > > Hi > > I am using QPC II v.4.04, I have expanded the memory to 128 MB, but with > > the > > same result. > > Best regards > > Renato > > > > -----Messaggio originale----- > > From: Rich Mellor (RWAP) > > Sent: Sunday, May 08, 2016 12:35 PM > > To: [email protected] > > Subject: Re: [Ql-Users] Archive file > > > > It is rare to come across this. Do you have expanded memory on your QL > > and/or a > > disk drive? > > > > If you are loading it from microdrive cartridge, then ensure that anything > > else > > which uses the QL memory is disabled (such as Toolkit II and other > > toolkits). > > Disk interfaces also use some of the QL memory. > > > > If you only have a bare QL and have nothing but QL Archive running - > > ensure > > you > > are running v2.38 of Archive (the last version) as that may help. Ask > > someone > > else to put the database on disk for you. > > > > If you have it on disk, then use an emulator on a PC to set up a QL > > session > > with > > more memory, and then you will need to find some way of splitting the > > database > > into smaller segments, or reducing some of the data for example. > > > > Rich Mellor > > www.rwapsoftware.co.uk > > www.sellmyretro.com > > > > > On May 8, 2016 at 11:04 AM Renato Barigazzi <[email protected]> > > > wrote: > > > > > > > > > Hi > > > Using Psion Archive I made a _dbf file too big and now I cannot open it: > > > “error 80, out of memory”. Is there any solution to open tihs file ? > > > Best regards > > > Renato Barigazzi > > > _______________________________________________ > > > QL-Users Mailing List > > Rich Mellor > > RWAP Software > > www.rwapsoftware.co.uk > > www.sellmyretro.com > > _______________________________________________ > > QL-Users Mailing List > > > > _______________________________________________ > > QL-Users Mailing List > Rich Mellor > RWAP Software > www.rwapsoftware.co.uk > www.sellmyretro.com > _______________________________________________ > QL-Users Mailing List > > _______________________________________________ > QL-Users Mailing List Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com _______________________________________________ QL-Users Mailing List
