Dilwyn Jones wrote:
>
> >Running Digicam with nothing more than SMSQE and Digicam loaded works
> >fine at 115600 with mouse plugged in, the problem must be with one of
> >the many extentions I normally have loaded in as well.
> >Now I need to respr the extentions one at a time until the culprit is
> >found.
>
> How did you get your mouse to work at that baud rate, mine manages
> 1200 baud ;-))
Ah well I only change the baud rate on Ser1, SMSQE looks after the mouse
on Ser2, it looks for a mouse on the highest numbered ser port starting
at Ser4 and working down until it finds a rodent ( or doesn't)
>
> That's the usual culprit in these cases, a software conflict and as
> you say only by adding one step at a time until the problem is found
> can you really trace it. It might be as easy in some cases as popping
> up a QPAC2 channels menu in case some program is hogging the serial
> port or setting a different baud rate,
That one I can try Dilwyn
it might be another extension
> with the same name (easily checked, copy the camera extensions to the
> screen if it has any extensions, make a note of the extension names,
> then compare these against EXTRAS list to see if two BASIC extensions
> have the same name)
>
I have been having a few other possible related problems such as Qspread
wont save spreadsheets if I change their name (locks up the program)
Par_use gives invalid parameter if used more than once Ser_use don't
seem to work at all.
more investigation needed - I'm on holiday between Xmas and the New
year, so maybe I'll get to the bottom of it then.
Meanwhile it great to go to our club night and take pictures of some of
our members playing with Joe PC,s then put them up on my Q40's screen
and shame them - philistines surround me but I shall not be moved (
catch that , could be a song there)
all the best - Bill
> [EMAIL PROTECTED]
> http://www.soft.net.uk/dj/index.html
