On Thu, 15 Feb 2001 at 12:07:21, John Hitchcock
<[EMAIL PROTECTED]> wrote:
(Ref: <002c01c09747$fa43e680$d0119fd4@o5e1c0>)
>On 21.01.01 Tony wrote -
>=====================
>I am having trouble printing from Easel using Xchange 3.90L.
>
>I am using the badged Sinclair FX80 compat, so the only driver supplied
>(epsonibm?) should be OK.
>
>Clearly though the code output means nothing to the printer.
>
>Easel with default driver is _almost_ OK.
>
>I get output, but the first few bytes of each line result in 'O' and
>filled O.
>The output is then OK, but the end of each line is lost - enough to
>remove the RH border only.
>
>Any ideas on both these?
>==========================
>
>I've played about a bit with this one and now the best I can do is to wonder
>whether the problem might be covered by this -
>
>"EPSON FX SERIES
>Narrow carriage FX models print to a maximum width of 8 inches. For these
>printers [RH margin] should be at least 0.5 inch."
Easel/
This has nothing to do with margin I think. The easel output is nowhere
near the RH margin.
As I said, there are two duff chrs at beginning of line, which could
explain the missing RH bit.
This is a std Sinclair badged printer, so just has to be OK.
Also Xchange is totally US.
--
QBBS (QL fido BBS 2:257/67) +44(0)1442-828255
mailto:[EMAIL PROTECTED] http://www.firshman.demon.co.uk
Voice: +44(0)1442-828254 Fax: +44(0)1442-828255
TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG
