At 11:48 �� 9/9/2002, you wrote:
>On 09/09/02 at 11:07 Phoebus Dokos wrote: > > >Hi all, > >starting yesterday, my Aurora setup began experiencing weird lock-ups, > >either during startup, or after it runs for 3 or four minutes. > > > >My complete Aurora setup: > > > >Q-Plane/QubIDE w/ QubIDE 2.01 /SGC/SuperHermes/2 Mb RomDisQ -on its > >original adapter- > > > >All of the above are mounted in an Enlight V30 BookPC case w/ 230W ATX > >power supply and ATX->AT power adapter. > > > >Thanks, > >Phoebus > >Check power supply voltages. Remember the email i once sent you, I had the >same problem because the Aurora/SGC were not loading the power supply >enough, so the voltages were all out of whack. Thanks Nasta, I had a hard drive on it as well (WDC6100AL) so the load (I would imagine) is adequate... I also tried my previous PSU (worked just fine before) in the fashion it was connected before but no cigar ..... Any other ideas? Phoebus
