At 01:00 �� 9/9/2002, you wrote:
>On 09/09/02 at 12:17 Phoebus Dokos wrote: > > >>> Hi all, > >>> starting yesterday, my Aurora setup began experiencing weird lock-ups, > >>> either during startup, or after it runs for 3 or four minutes. > > > Thanks Nasta, I had a hard drive on it as well (WDC6100AL) so the load (I > > would imagine) is adequate... > >Never the less, if you hvae anything to do it with, check the power supply >voltages, it may point to another problem. > > > I also tried my previous PSU (worked just fine before) in the fashion it > > was connected before but no cigar ..... > > > >Any other ideas? > >Removing Qubide and booting from floppy >cleaning or merely reseating the 8302 chip on Aurora, ditto the SCAN ROM. No floppy or Qubide attached 8302 appeared oxidized (Cleaned it...) - Didn't do the same with Aurora SCAN tho... off I go to check that too >If you have a spare GC you could try that instead of the SGC just to be >sure where the problem really is. >Can you verify that it actually crashes, rather than just getting a corrupt >screen? Does it manage to boot SMSQ/E or are we talking QL ROM/Minerva? It does boot SMSQ/E (2.91) from RomDisq and crashes shortly after that... if you do a hard reset after it crashed... it refuses to start totally... Checking again and getting back to you Thanks Phoebus >Nasta
