Unfortunatly kernel version 2.4.18 is my kernel version. I have tried the version 2.4.21 with similar effects
alas it seems the cdrw drive I purchased as well was not compatible with my system and caused problems
when put in the ide0 hdb slot initialy after trying to access under SMSQE using QCDEXE , temporily 'cured'
by powerdowning the computer then switching it back on, but now it seems to have failed .I think I connected
the drives properly but I am no so sure,It may my io card is faulty , but possibly the drive I bought might
be the problem.
FWIW I think I have a hardware problem, but recompiling the 2.4.21 kernel with the appropriate patches and may slight changes to the configuration might be a good idea. I will also may check if putting the new hardrive in slave on the ide0 works and may be clone my system and replace the smaller drive with it.
David Gilham
-----------------------------
The universe is not only queerer than we imagine
It is quuerer than we can imagine
-----------------------------
On Thu, 27 Nov 2003 11:39 , Fabrizio Diversi <[EMAIL PROTECTED]> sent:
Hello David,
I had the same problem having the same configuration on the qx0.
You can solve it easily upgrading the kernel to the latest one 2.4.18 or Better the 2.4.21. You can find the kernel on Richard or Therry web.
I am not sure about the cause, i think is due to not to the kernel version but to the kernel configuration about sharing interrupt parameter. Obviously you can also try to recompile the kernel version you have now.
Let me know, i will try to help you if possible.
Are you using Shoestring, the last q60 linux distribution ?
Fabrizio
Message sent via Totalise Webmail - http://www.totalise.co.uk/
